Here are screen shots, with setup that works for me. Maybe someone did it with different config, THIS is how it works for me.
Hope it can help you in some way.
Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 47. (Read 827336 times)
May 22, 2014, 05:17:11 AM
I see a lot of ppl having trouble with mining X11 coins. After few days I finaly did it
Here are screen shots, with setup that works for me. Maybe someone did it with different config, THIS is how it works for me.
Hope it can help you in some way.
Here are screen shots, with setup that works for me. Maybe someone did it with different config, THIS is how it works for me.
Hope it can help you in some way.
May 21, 2014, 11:58:59 PM
I'm not sure... when I run from the API like that it comes up after a bit of downtime (it waits for a retry before coming back up). I can only guess MM isn't waiting for the pools to retry before just erroring out, where as sgminer (from the process log) will come up after a couple retries. However after a little while, the pools appear to be down and SGMiner can no longer find work... it'll wait like another five minutes before finding them again, then lose the connection sporadically, rinse repeat.
The weird thing is when I connect using my .bat file and SPHSGMINER normally they come up, although they have the occasional interruption. My connection is sometimes flaky, but I can almost always maintain a connection (sometimes it'll get interrupted for a few seconds).
I tried drkpool.com as well as suchpool.pw which is what I normally use and they both have the same issues.
It'd be nice if there was a counter for the amount of time MM has spent waiting for specific pools, how long it's spent on pools in the list, and how uptime of the specific stratum. Maybe even a pool health list.
The weird thing is when I connect using my .bat file and SPHSGMINER normally they come up, although they have the occasional interruption. My connection is sometimes flaky, but I can almost always maintain a connection (sometimes it'll get interrupted for a few seconds).
I tried drkpool.com as well as suchpool.pw which is what I normally use and they both have the same issues.
It'd be nice if there was a counter for the amount of time MM has spent waiting for specific pools, how long it's spent on pools in the list, and how uptime of the specific stratum. Maybe even a pool health list.
May 21, 2014, 11:01:34 PM
Tried the newest version. SPHSGMINER still does not work for x11, even with the -k darkcoin command after dropping SPHSGMINER files in. I get 'none of the pools configured could be used'.
DarkcoinSGMiner does the same thing.
Zlib1.dll is still missing if I allow MM to download and try to run SPHSGMINER.
DarkcoinSGMiner does the same thing.
Zlib1.dll is still missing if I allow MM to download and try to run SPHSGMINER.
Try running the process using the Process Log. Right-click and click Launch. What do they say? I can mine Darkcoin using SPH-SGMiner and drkpool.com without problems.
I'm also only hosting downloads that are provided by their maintainers, so that is the official SPH-SGMiner download. When they update that to include zlib1.dll I will grab that file.
Edit: It looks like they may already have a fixed download with zlib1.dll. Checking it out now.
May 21, 2014, 10:53:10 PM
Tried the newest version. SPHSGMINER still does not work for x11, even with the -k darkcoin command after dropping SPHSGMINER files in. I get 'none of the pools configured could be used'.
DarkcoinSGMiner does the same thing.
Zlib1.dll is still missing if I allow MM to download and try to run SPHSGMINER.
DarkcoinSGMiner does the same thing.
Zlib1.dll is still missing if I allow MM to download and try to run SPHSGMINER.
May 21, 2014, 09:54:05 PM
Support for mining Quark and Groestl coins as been added including profitability data from CoinWarz:
https://www.dropbox.com/s/cpm4cecnx0g95n9/MultiMiner-3.0.0.zip
I honestly haven't been able to get SPH-SGMiner to cooperate with my rig for these, but in theory this should all work properly if you have a working configuration for Quark or Groestl. Looking for feedback from anyone who mines these algos!
https://www.dropbox.com/s/cpm4cecnx0g95n9/MultiMiner-3.0.0.zip
I honestly haven't been able to get SPH-SGMiner to cooperate with my rig for these, but in theory this should all work properly if you have a working configuration for Quark or Groestl. Looking for feedback from anyone who mines these algos!
May 21, 2014, 09:35:55 PM
I have done everything you say and when I changed to SPHSGMiner I get this: This application was unable to start correctly (Oxc000007b). Click ok to close application. I even tried launch from process log.
Unfortunately I cannot vouch for the stability of the backend miners on each system. I find that SPH-SGMiner crashes mining X11 for me several times as well, and then it will start up and work normally.
May 21, 2014, 09:26:50 PM
Ah - one thing I forgot to mention (and will be fixed). You need to enter "-k darkcoin" into the X11 arguments or this won't be passed in. This isn't necessary for any of the other algos which auto-detect these args.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
Where can I get SPH-SGMiner and how do I install it to make MM use it? The Darkcoin SGMiner that MM installs does not work, all I get is "none of the pools configured could be used", I have tried several.
Click Settings, then Advanced miner settings, and finally Advanced GPU miner settings.
Select X11, and then change the Miner entry to SPHSGMiner. When you start mining, SPH-SGMiner will be automatically downloaded and installed and then used.
I have done everything you say and when I changed to SPHSGMiner I get this: This application was unable to start correctly (Oxc000007b). Click ok to close application. I even tried launch from process log.
May 21, 2014, 08:45:26 PM
Ah - one thing I forgot to mention (and will be fixed). You need to enter "-k darkcoin" into the X11 arguments or this won't be passed in. This isn't necessary for any of the other algos which auto-detect these args.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
Where can I get SPH-SGMiner and how do I install it to make MM use it? The Darkcoin SGMiner that MM installs does not work, all I get is "none of the pools configured could be used", I have tried several.
Click Settings, then Advanced miner settings, and finally Advanced GPU miner settings.
Select X11, and then change the Miner entry to SPHSGMiner. When you start mining, SPH-SGMiner will be automatically downloaded and installed and then used.
May 21, 2014, 08:43:56 PM
Got great news from CoinWarz!
So this will be included, probably tonight, and definitely for 3.0 proper.
Quote
Hello Nate,
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
So this will be included, probably tonight, and definitely for 3.0 proper.
Wonderfull !!! Great news!!! Everything seems to fall in place for v.3.0. Keep up the good work.
The CoinWarz API changes are live and, AFAIK, there should be no updates needed for MultiMiner. Just restart to get the new coin list. If you already added Darkcoin with DRK it should be all-set.
May 21, 2014, 08:37:17 PM
I have the newest version of MM and it seems as though x11 still does not work. It gives a 'none of the pools could be used' error when trying to mine with either SPHSGMINER or DarkcoinSGMiner.
When first trying to start with SPHSGMINER on x11 it gives a 'zlib.dll is missing' error, which I remedied by plopping my SPHSGMINER install in the MM SPHSGMINER directory.
When first trying to start with SPHSGMINER on x11 it gives a 'zlib.dll is missing' error, which I remedied by plopping my SPHSGMINER install in the MM SPHSGMINER directory.
+1
Ah - one thing I forgot to mention (and will be fixed). You need to enter "-k darkcoin" into the X11 arguments or this won't be passed in. This isn't necessary for any of the other algos which auto-detect these args.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
Where can I get SPH-SGMiner and how do I install it to make MM use it? The Darkcoin SGMiner that MM installs does not work, all I get is "none of the pools configured could be used", I have tried several.
May 21, 2014, 08:17:46 PM
Thanks for the feedback. Both of these are on my to-do for the 3.0 release. When I checked CoinWarz a week or two ago it only had Scrypt-N, so I need to go back and see what it takes to support the rest of these coins and algorithms.
Meh - no good. I can't find any way to get at the newer algo information via the CoinWarz API unless you link directly to a coin via its symbol (e.g. DRK). I contacted their support and will let you folks know what I hear. It's a bummer not having the X11 pricing info in there.
Got great news from CoinWarz!
Quote
Hello Nate,
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
So this will be included, probably tonight, and definitely for 3.0 proper.
Wonderfull !!! Great news!!! Everything seems to fall in place for v.3.0. Keep up the good work.
May 21, 2014, 08:07:32 PM
Thanks for the feedback. Both of these are on my to-do for the 3.0 release. When I checked CoinWarz a week or two ago it only had Scrypt-N, so I need to go back and see what it takes to support the rest of these coins and algorithms.
Meh - no good. I can't find any way to get at the newer algo information via the CoinWarz API unless you link directly to a coin via its symbol (e.g. DRK). I contacted their support and will let you folks know what I hear. It's a bummer not having the X11 pricing info in there.
Got great news from CoinWarz!
Quote
Hello Nate,
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
Interesting enough, we are planning on releasing an update to the API within the next hour or so that will include the new algos as well as providing an option to specify the hash rate parameters for each algo. Keep an eye on out for our post on Twitter for when the update will be made available.
Thanks!
CoinWarz
So this will be included, probably tonight, and definitely for 3.0 proper.
May 21, 2014, 07:37:56 PM
Got everything set up and working, but MultiMiner isn't detecting my Pi. I run a 192.168.1.x network. Here's my config.
MulltiMiner is still detecting my AntMiner S1s on the same network.
Code:
#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer --set-device gridseed:clock=825 -S all --queue 10 --device gsd --set-device gridseed:clock=850 --scrypt --api-description Gridseed --api-listen --api-allow W:127.0.0.1,W:192.168.1.0/24 -c /opt/minepeon/etc/miner.conf
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer --set-device gridseed:clock=825 -S all --queue 10 --device gsd --set-device gridseed:clock=850 --scrypt --api-description Gridseed --api-listen --api-allow W:127.0.0.1,W:192.168.1.0/24 -c /opt/minepeon/etc/miner.conf
MulltiMiner is still detecting my AntMiner S1s on the same network.
If MultiMiner still isn't finding it you can use the following utility to troubleshoot:
https://www.dropbox.com/s/4v0ri2ax39stgax/MultiMiner.Xgminer.Api.Client.7z
This is a simple console RPC API client. Run it on the same machine as MultiMiner, passing in the port and IP of the mining machine:
Code:
MultiMiner.Xgminer.Api.Client.exe 4028 192.168.0.100
Where 192.168.0.100 is the miner. After it has launched, try typing "version" or "devs" without the quotes. That should return information from the miner if things are setup properly.
Finally, try restarting MultiMiner. It only scans the network every 10 minutes but if you restart it will scan right away.
May 21, 2014, 07:18:56 PM
I have the newest version of MM and it seems as though x11 still does not work. It gives a 'none of the pools could be used' error when trying to mine with either SPHSGMINER or DarkcoinSGMiner.
When first trying to start with SPHSGMINER on x11 it gives a 'zlib.dll is missing' error, which I remedied by plopping my SPHSGMINER install in the MM SPHSGMINER directory.
When first trying to start with SPHSGMINER on x11 it gives a 'zlib.dll is missing' error, which I remedied by plopping my SPHSGMINER install in the MM SPHSGMINER directory.
+1
Ah - one thing I forgot to mention (and will be fixed). You need to enter "-k darkcoin" into the X11 arguments or this won't be passed in. This isn't necessary for any of the other algos which auto-detect these args.
Worth a try as SPH-SGMiner works fine for X11 mining for me.
May 21, 2014, 06:49:27 PM
This may be a stupid question, but I'm trying to get set up in advance. I have my Pi set up with MinePeon, but it's not showing in MuM. I'm thinking it's because the Pi has no miners hooked up. Could this be the case, or should it show up regardless?
They won't show up unless CGMiner or BFGMiner is actively mining. There's no RPC API to connect to.
Got everything set up and working, but MultiMiner isn't detecting my Pi. I run a 192.168.1.x network. Here's my config.
Code:
#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer --set-device gridseed:clock=825 -S all --queue 10 --device gsd --set-device gridseed:clock=850 --scrypt --api-description Gridseed --api-listen --api-allow W:127.0.0.1,W:192.168.1.0/24 -c /opt/minepeon/etc/miner.conf
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer --set-device gridseed:clock=825 -S all --queue 10 --device gsd --set-device gridseed:clock=850 --scrypt --api-description Gridseed --api-listen --api-allow W:127.0.0.1,W:192.168.1.0/24 -c /opt/minepeon/etc/miner.conf
MulltiMiner is still detecting my AntMiner S1s on the same network.
May 21, 2014, 05:44:54 PM
I am wondering if there is a way to get all the coins list from Coinwarz. Because for now, it seems that Multiminer only get the sha-256, scrypt and scrypt-n coins in the profitability/suggestion list. I guess it is the api at coinwarz that didn't allow a complete list yet. This is the only thing missing for the autoswitch to work with those other coins. I hope this will change because now Multiminer pretty much cover them all:
-sha-256: I use bfgminer
-scrypt: I use bfgminer
-scrypt-n: I use shgminer
-X11: I would use sphsgminer
-Quark: Not in the list in Multiminer yet but can be mine with sphsgminer
-Groestl: Not in the list in Multiminer yet but can be mine with sphsgminer
-Keccak (sha-3): Only one in the coinwarz list that the miner is missing. I would recommend adding CGMiner for CopperLark mining v3.6.6
-Scrypt-jane: Not in the coinwarz list for now but multiminer is ready. I would use Kalroth-SJ CGMiner
Another suggestion: I think you could safely remove the miner darkcoinsgminer from the list of miner as it is an old version of sphsgminer (in fact i think it was one of the first version). You can get more details on that and see the build order here: https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795
-sha-256: I use bfgminer
-scrypt: I use bfgminer
-scrypt-n: I use shgminer
-X11: I would use sphsgminer
-Quark: Not in the list in Multiminer yet but can be mine with sphsgminer
-Groestl: Not in the list in Multiminer yet but can be mine with sphsgminer
-Keccak (sha-3): Only one in the coinwarz list that the miner is missing. I would recommend adding CGMiner for CopperLark mining v3.6.6
-Scrypt-jane: Not in the coinwarz list for now but multiminer is ready. I would use Kalroth-SJ CGMiner
Another suggestion: I think you could safely remove the miner darkcoinsgminer from the list of miner as it is an old version of sphsgminer (in fact i think it was one of the first version). You can get more details on that and see the build order here: https://bitcointalksearch.org/topic/ann-sph-sgminer-multi-coin-multi-algorithm-gpu-miner-added-marucoin-475795
Thanks for the feedback. Both of these are on my to-do for the 3.0 release. When I checked CoinWarz a week or two ago it only had Scrypt-N, so I need to go back and see what it takes to support the rest of these coins and algorithms.
Meh - no good. I can't find any way to get at the newer algo information via the CoinWarz API unless you link directly to a coin via its symbol (e.g. DRK). I contacted their support and will let you folks know what I hear. It's a bummer not having the X11 pricing info in there.
May 21, 2014, 01:58:31 PM
Nwoolls, there seems to be a bug in latest version of MM: the app is not launching after logging in windows, even though settings to do the required are in place. Can you please check this.
This hasn't changed. Is there a shortcut in your Startup folder? Is there an older version that works? If so let me know which version.
Yeah, there's a shortcut to MM(V2.8.9) in my startup folder, however I completely uninstalled it and started using V3.0.0 since yesterday. Should I now reinstall the latest version or just manually set up the app to start on windows start??
May 21, 2014, 01:36:17 PM
Fired up my gridseeds today and found a small bug in bfgminer 3.99. I'm trying to individually OC some to a higher value, but I have one unit that gives high rejects if I do this. I found that I can individually enable the devices by using "--device gsd#" to only use that number - the idea being to run multiple instances of BFGminer. The problem is that when I disable any number, the remaining devices get stuck in "initializing" and I can't open them in another miner.
Any thoughts?
Any thoughts?
MultiMiner controls which items it starts so I don't think you'll be able to do what you are trying to do.
That said, you can already individually overclock devices in BFGMiner, including the GridSeeds. Double-click the GridSeed in MultiMiner and check the Path on the right. Then use:
Code:
--set gridseed@\\.\COMXYZ:clock=ABC
That will only overclock the device at the given path.
I randomly ran across this way this morning actually. I'm using something very similar.
Code:
--set-device gsd0:clock=850 --set-device gsd1:clock=850 --set-device gsd2:clock=875
May 21, 2014, 11:26:51 AM
Fired up my gridseeds today and found a small bug in bfgminer 3.99. I'm trying to individually OC some to a higher value, but I have one unit that gives high rejects if I do this. I found that I can individually enable the devices by using "--device gsd#" to only use that number - the idea being to run multiple instances of BFGminer. The problem is that when I disable any number, the remaining devices get stuck in "initializing" and I can't open them in another miner.
Any thoughts?
Any thoughts?
MultiMiner controls which items it starts so I don't think you'll be able to do what you are trying to do.
That said, you can already individually overclock devices in BFGMiner, including the GridSeeds. Double-click the GridSeed in MultiMiner and check the Path on the right. Then use:
Code:
--set gridseed@\\.\COMXYZ:clock=ABC
That will only overclock the device at the given path.
May 21, 2014, 11:25:27 AM
Nwoolls, there seems to be a bug in latest version of MM: the app is not launching after logging in windows, even though settings to do the required are in place. Can you please check this.
This hasn't changed. Is there a shortcut in your Startup folder? Is there an older version that works? If so let me know which version.
Jump to: