Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 61. (Read 827303 times)

Can you please explain the processes you went thru to get multiminer working with your gridseed it would be highly appreciated!!!!!!!!!!!!!!

Minor iOS MobileMiner bug.  When you tap on a miner, it pulls down the details.  After doing so, it is not possible to hide the small strip on the side for the details.  It would seem intuitive that you can click on a blank part of the miners and clear it, but the only way I've found to clear it is to kill the app.

Pretty much.  That, or if you use ghash.io for your pool, you can set the payout to give a certain percent to another address.

I just want to thank Nwools for an awesome mining client....I really like it, I completely switched over from using BFG in its raw form to Multiminer!!

thanks for the hard work!!

That is where I was confused as my antminers all all networked. I guess a manual donation then?

Every 100th share is sent to Nwools pool instead of yours.  You can see the pool change to 'donation' when it's sending.  

Bugs:
I don't think Nwools has a pool configured for all coins, and it doesn't submit any donation shares for network miners.

Can someone explain how the perks donation works? How is 1% donated? I enabled it and want to help with development Just not sure HOW I am sending you anything.

Found a small bug on one particular pool when I was doing some mining for a friend.  When mining to Coin-Pool (stratum+tcp://dem.coin-pool.org), the reported profitability was way out of whack.  Happened when using both coinbase and coinwarz, but as soon as I switched pools (ghash and Eligius are my mains), the numbers went back to about where I expected them to be.

MultiMiner will work with any of the miners listed in the BFGMiner thread.  For assistance setting up anything not listed there, the BFGMiner thread is the place to go.

It looks like it is not currently supported, but is in the works.

Can I use this with my Cointerra Terraminer IV?

If yes, how?

Cool, thanks. Looking forward to the new build.

I've heard a few similar reports but only have 2 devices currently for reproducing issues. I do have some remote access to machines with more for doing more investigating.

That said the build of BFGMiner out there is just past the "It Works" stage and there's been a lot of changes since then. Once 4.0 is closer (probably today / tomorrow) I'll release another build. If the issue still exists then I will start working with individuals to address it.

Awesome - ty for the valuable feedback. Noted and will try to get to it soon (traveling this week) 

That was kind of the reason for wanting to show the pools.  Say I had a couple hundred network miners.  It would be nice to be able to see at-a-glance which ones are mining to which pool.  Personally speaking, I think that the pool info is more valuable than seeing which mining software is doing the mining, and were it up to me, and I wanted to keep the more condensed format, I might change it so that a popup shows the mining software, and the column shows the pool.

Hi Nate,

Been really happy with MultiMiner for running my gridseeds on win8.1. It's my most troublefree option I've tested. I wanted to post this problem I've been having running 30 gridseeds in MM. It doesn't seem to occur when I have less than 5 - 10 running at once:

More often than not, when I start mining, 1 or 2 or 3 miners won't find shares, or they find 1 or 2 shares then stop. They are hashing full speed the whole time, even the ones not reporting shares. I've tried various combinations of "restart suspect miners" and "detect orphaned miners", but I rarely see an effect on this problem. The problem is not specific to any particular miner or com port, it jumps around.  I hit stop, then start mining again... Previous ones that didn't work, are now working, new ones are now not working. This happens 50-75% of the times I start mining. Its obvious to me when the problem is happening, so I don't wait more than 10 mins usually. If they are all going to work, they tend to all find shares in the 1st 1-2 mins. This has been true for me at any diff setting I use at the pool (multipool.us). But, it only takes about 10 mins of stop/starting to get all of them to work at once, and once they do, they run for days!

thanks

This pic was at a high diff setting, hence the low amount of shares...
http://i.imgur.com/waF1mme.jpg

So I've implemented this as a tooltip instead of displaying it within the table. It just seemed a bit busy to me with that information included. Hover over the coins to see the last pool that submitted work. Let me know what you think.

Note that you could theoretically be mining 100 different pools per machine, so for simplicity and server resources I just show the one without clicking through to the details.

Unfortunately I am not familiar with setting that exact parameter but if you have the argument for BFGMiner already you can enter that directly into MultiMiner. Click on Settings > Advanced miner settings and enter it under the SHA-2 Arguments.

Thank you sir - that should be all I need to take care of it. I'll let you know if I need more info.

Here's the error:

I'm mining on BTC Guild and Tripleming.com

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.UriFormatException: Invalid URI: The hostname could not be parsed.
   at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)
   at MultiMiner.Win.Extensions.StringExtensions.DomainFromHost(String host) in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.Win\Extensions\StringExtensions.cs:line 27
   at MultiMiner.Win.Forms.MinerForm.RemoveSelfReferencingNetworkDevices() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.Win\Forms\MinerForm.cs:line 4748
   at MultiMiner.Win.Forms.MinerForm.RefreshNetworkDeviceStats() in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.Win\Forms\MinerForm.cs:line 4820
   at MultiMiner.Win.Forms.MinerForm.tenSecondTimer_Tick(Object sender, EventArgs e) in d:\Data\Visual Studio Projects\Personal\MultiMiner\MultiMiner\MultiMiner.Win\Forms\MinerForm.cs:line 2920
   at System.Windows.Forms.Timer.OnTick(EventArgs e)
   at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
MultiMiner.Win
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file[Suspicious link removed]
----------------------------------------
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
MultiMiner.Engine
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Engine.DLL
----------------------------------------
MultiMiner.Utility
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Utility.DLL
----------------------------------------
MultiMiner.Xgminer.Api
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Xgminer.Api.DLL
----------------------------------------
MultiMiner.Xgminer
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Xgminer.DLL
----------------------------------------
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Core
    Assembly Version: 3.5.0.0
    Win32 Version: 3.5.30729.7903 built by: Win9Rel
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
Accessibility
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
-cuskam1
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
cewdbrso
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.Discovery
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Discovery.DLL
----------------------------------------
MultiMiner.Remoting
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Remoting.DLL
----------------------------------------
System.Web.Extensions
    Assembly Version: 3.5.0.0
    Win32 Version: 3.5.30729.7903
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Extensions/3.5.0.0__31bf3856ad364e35/System.Web.Extensions.dll
----------------------------------------
gxzsqq1j
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
dxsbekfl
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.CoinWarz
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.CoinWarz.DLL
----------------------------------------
MultiMiner.CoinApi
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.CoinApi.DLL
----------------------------------------
MultiMiner.CoinChoose
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.CoinChoose.DLL
----------------------------------------
dnip2ejs
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Newtonsoft.Json
    Assembly Version: 4.5.0.0
    Win32 Version: 5.0.8.16617
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/Newtonsoft.Json.DLL
----------------------------------------
MultiMiner.Coinbase
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Coinbase.DLL
----------------------------------------
rnsl33w-
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
23btpl3p
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
uar3casu
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
sqmf0uri
    Assembly Version: 2.8.3.176
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Interop.IWshRuntimeLibrary
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/Interop.IWshRuntimeLibrary.DLL
----------------------------------------
mmhpsacb
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
wkf17aq4
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.Stats
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Stats.DLL
----------------------------------------
-h9r7vsr
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
MultiMiner.Xgminer.Discovery
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.Xgminer.Discovery.DLL
----------------------------------------
MultiMiner.MobileMiner
    Assembly Version: 2.8.3.176
    Win32 Version: 2.8.3.176
    CodeBase: file:///C:/Users/Robert/Documents/MultiMiner.app/Contents/Resources/MultiMiner.MobileMiner.DLL
----------------------------------------
gzy5yecs
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
ooebmbv9
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.7905 (win9rel.050727-7900)
    CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:


   


When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

I know its probably been asked somewhere on this thread, but 126 pages is a bit deep, but is there a way to change the oscillator bits on Fury's in multiminer?? I played around on it a bit last night and couldn't find what I was looking for...(I know its probably simple and if it was a snake it would have bit me by now...)...
  I like how it looks and when I get MORE time I plan on getting better acquainted with it.....but until I understand it a bit better I will continue to mine with just BFG miner.... but I feel that this program will be used by me in the very near future...