MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 73.

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

Quote from: nwoolls on March 06, 2014, 10:54:57 PM

Quote from: 124C41 on March 06, 2014, 09:37:11 PM

After 1 full day of mining with 2.8 PR1 only 2 of my 3 rigs have pool switching enabled on web.mobileminerapp.com.

Do you have Remote Commands enabled for MobileMiner? It's under Settings > Advanced service settings. That needs to be enabled for the pool switching to function.

Yes I do Nate.
Seems to have been resolved now on web.mobileminerapp.com, possible API or cron delay... ?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: 124C41 on March 06, 2014, 09:37:11 PM

After 1 full day of mining with 2.8 PR1 only 2 of my 3 rigs have pool switching enabled on web.mobileminerapp.com.

Do you have Remote Commands enabled for MobileMiner? It's under Settings > Advanced service settings. That needs to be enabled for the pool switching to function.

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

Found bug?

After 1 full day of mining with 2.8 PR1 only 2 of my 3 rigs have pool switching enabled on web.mobileminerapp.com.

Nate, let me know if you would like me to supply more info - happy to help.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Hi Nate,
Same weird acting displays.
Everything runs ok though.

Quote from: nwoolls on March 05, 2014, 08:45:18 PM

Quote from: ManeBjorn on March 05, 2014, 08:37:43 PM

So does this look correct then?

Code:

--api-listen --log 5 --api-allow W:127.0.0.1,192.168.0.0/24

That should be right. That controls how often the miner logs statistics, which (unfortunately - not sure why this is) changes the actual key used for the current hashrate in the API. Added to that, the miners also change the internal default, meaning that (unless you specify --log manually) you cannot count on a consistent key for current hashrate in the API.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Did you right click on the empty part of the screen and have it do a hardware scan?
Also what software were you using with your TwinFury before you installed MultiMiner?
If it was CGMiner you need to remove the drivers for it and reinstall the new drivers that you can download from the MultiMiner webiste.
http://www.multiminerapp.com/
You should choose the Blue/RedFury drivers.
I hope this helps you.
Happy Mining.

Quote from: brunosky on March 06, 2014, 08:05:51 PM

Hello Nate,
I've just installed MultiMiner on my Mac Pro.
I don't understand why it can't see or the 6 Twinfury or the GPU: in the low right corner I can read 0 device(s).
Can you help me?
Thanks in advance

brunosky

newbie

Activity: 13

Merit: 0

Hello Nate,
I've just installed MultiMiner on my Mac Pro.
I don't understand why it can't see or the 6 Twinfury or the GPU: in the low right corner I can read 0 device(s).
Can you help me?
Thanks in advance

Blackbird0

full member

Activity: 207

Merit: 100

Quote from: nwoolls on March 05, 2014, 03:28:39 PM

Quote from: Blackbird0 on March 05, 2014, 08:16:26 AM

Just checking in, have you gotten replacements for DualMiners yet? I'm interested in testing the OC function.

It should be here tomorrow.

Thanks!

ManeBjorn

legendary

Activity: 1288

Merit: 1004

That makes sense though especially with the way cgminer is setup to run these things.
I am learning more each day.
Thanks I will let you know how it works.

Quote from: nwoolls on March 05, 2014, 08:45:18 PM

Quote from: ManeBjorn on March 05, 2014, 08:37:43 PM

So does this look correct then?

Code:

--api-listen --log 5 --api-allow W:127.0.0.1,192.168.0.0/24

That should be right. That controls how often the miner logs statistics, which (unfortunately - not sure why this is) changes the actual key used for the current hashrate in the API. Added to that, the miners also change the internal default, meaning that (unless you specify --log manually) you cannot count on a consistent key for current hashrate in the API.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ManeBjorn on March 05, 2014, 08:37:43 PM

So does this look correct then?

Code:

--api-listen --log 5 --api-allow W:127.0.0.1,192.168.0.0/24

That should be right. That controls how often the miner logs statistics, which (unfortunately - not sure why this is) changes the actual key used for the current hashrate in the API. Added to that, the miners also change the internal default, meaning that (unless you specify --log manually) you cannot count on a consistent key for current hashrate in the API.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

So does this look correct then?

Code:

--api-listen --log 5 --api-allow W:127.0.0.1,192.168.0.0/24

Quote from: nwoolls on March 05, 2014, 08:20:22 PM

Quote from: ManeBjorn on March 05, 2014, 08:00:16 PM

I have an odd question.
I had updated my firmware on the Avalon lastnight and that went great.
The only problem I have is it no longer shows the current gh/s rate in MuMi.
It does show the average rate and accepted and rejected and such.
I am using the pre-release 2.7.6
It's the same on both systems.

Try adding --log 5 to the argument / config file for your Avalon.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ManeBjorn on March 05, 2014, 08:00:16 PM

I have an odd question.
I had updated my firmware on the Avalon lastnight and that went great.
The only problem I have is it no longer shows the current gh/s rate in MuMi.
It does show the average rate and accepted and rejected and such.
I am using the pre-release 2.7.6
It's the same on both systems.

Try adding --log 5 to the argument / config file for your Avalon.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

I have an odd question.
I had updated my firmware on the Avalon lastnight and that went great.
The only problem I have is it no longer shows the current gh/s rate in MuMi.
It does show the average rate and accepted and rejected and such.
I am using the pre-release 2.7.6
It's the same on both systems.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Blackbird0 on March 05, 2014, 08:16:26 AM

Just checking in, have you gotten replacements for DualMiners yet? I'm interested in testing the OC function.

It should be here tomorrow.

Blackbird0

full member

Activity: 207

Merit: 100

Just checking in, have you gotten replacements for DualMiners yet? I'm interested in testing the OC function.

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

Quote from: nwoolls on March 05, 2014, 02:20:13 AM

For those of you who live on the raggedy-edge, version 2.8 PR1 (preview/pre-release) is now available for testing:

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

There are a few more changes in-store for this update, but so far this preview includes:

Improved overall performance
Coin difficulty is read directly from the network once mining begins
Worker temperatures are shown for Network Devices and the Stratum Proxy
Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
Added the option to save coin configurations to all rigs via MultiMiner Remoting
Customized names for machines and devices are now pushed to MobileMiner

Thanks in advance for any feedback and bug reports Grin

Living on the edge
Running smoothly on two rigs right now for the last 10 minutes

nwoolls

hero member

Activity: 840

Merit: 1002

For those of you who live on the raggedy-edge, version 2.8 PR1 (preview/pre-release) is now available for testing:

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

There are a few more changes in-store for this update, but so far this preview includes:

Improved overall performance
Coin difficulty is read directly from the network once mining begins
Worker temperatures are shown for Network Devices and the Stratum Proxy
Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
Added the option to save coin configurations to all rigs via MultiMiner Remoting
Customized names for machines and devices are now pushed to MobileMiner

Thanks in advance for any feedback and bug reports Grin

Raptor2213

full member

Activity: 210

Merit: 100

Two requests for you.

I know I asked for this previously, but please have MuM stop suggesting crappy coins. I've had it suggest coins that are 0.1% profitable. I would like to have push notifications on, but I don't like getting stupid coin SPAM (and it's useful to see what's profitable).
Could you make it so that we can tell MuM to update to the latest version through MobileMiner?

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: doctormandrake on March 05, 2014, 01:33:35 AM

no such luck, in fact when I right click, the toggle for scan hardware is "grey" (not selectable)

Click the Stop button to stop mining and then click Scan Hardware. You can't scan for hardware while mining (devices are in use).

doctormandrake

sr. member

Activity: 452

Merit: 250

Quote from: nwoolls on March 03, 2014, 11:13:13 PM

Quote from: doctormandrake on March 03, 2014, 04:06:56 PM

Hi, having some trouble with multiminer. FOr some reason I am having no luck getting it to properly detect my miners. Have 4 ants and 2 block erupters running, all have been detected in the past easily.

Did you try right-clicking and clicking Scan Hardware? Starting with 2.7 this no longer happens automatically on startup.

no such luck, in fact when I right click, the toggle for scan hardware is "grey" (not selectable) updated to the most recent multiminer to check, no such luck.

Just using bfgminer for the moment with .cmd files and periodically testing, only thing i havent done is uninstall and reinstall drivers, but with bfgminer detecting them and working I didn't see that to be useful.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: TsaktuO on March 04, 2014, 11:29:55 PM

Installed multiminer on xunbuntu 12.03. Once I hit start for mining, the client crashes...

Any thought on how to fix this issues. Everything else seems to be working out. If I can not get this to work... cgminer it is : (

Please copy the text that is left on the console after the MultiMiner window closes and paste it in a response here.

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 73. (Read 827336 times)