MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 70.

brunosky

newbie

Activity: 13

Merit: 0

Quote from: nwoolls on March 13, 2014, 05:32:01 PM

Can you post the rest of the output please? All of the way down until the next command prompt. Unfortunately this wasn't enough to see what's going wrong.

It's curious, but the last line of the output is just this one:

Code:

[2014-03-13 22:34:16] TBF 5a: Init: baud=115200

After the command line without --scrypt, the next command prompt doesn't appear any more.
I've tried again, and waited much more time, but it's the same: it's like the process is interrupted.
Unfortunately I can't give you more info.

Thank you

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Hi Nate.
I know you are wicked busy but did you have any idea what I should change on this to make it report correctly?

Quote from: ManeBjorn on March 11, 2014, 04:12:37 PM

Hi Nate.
The Avalon still will not show the current hash rate just average.

Code:

--api-listen --log 5 --api-allow W:127.0.0.1,192.168.0.0/24

I am not sure what I need to do.

nwoolls

hero member

Activity: 840

Merit: 1002

brunosky

newbie

Activity: 13

Merit: 0

Quote from: nwoolls on March 13, 2014, 02:43:56 PM

Quote from: brunosky on March 13, 2014, 02:07:37 PM

Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D

I think this is actually my bad. Please run the above without --scrypt.

Hi Nate,
I ran the command line without --scrypt, and this is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto -D
[2014-03-13 21:29:17] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-13 21:29:17] Started bfgminer 3.10.0
[2014-03-13 21:29:19] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:064:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:20] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:064:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:22] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:255:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:23] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:255:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:25] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:028:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:028:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:125:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:125:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:029:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:061:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:061:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:093:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:093:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:253:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:253:001: LIBUSB_ERROR_OTHER
[2014-03-13 21:29:26] hidapi_try_lib: Successfully loaded libhidapi.dylib
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple LED Cinema Display" serial "170408FB"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Apple Keyboard" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Display Audio" serial "FB080417"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "USB Receiver" serial "(null)"
[2014-03-13 21:29:26] hid_devinfo_scan: Found "Ultrathin Touch Mouse" serial "00-1f-20-97-73-8c"
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:001 (path=(null), vid=05ac, pid=8006, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:125:001 (path=(null), vid=05ac, pid=8005, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:001 (path=(null), vid=2188, pid=0001, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:002 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:003 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:004 (path=(null), vid=05ac, pid=9126, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:007 (path=(null), vid=2109, pid=2812, manuf=VIA Labs, Inc. , prod=USB2.0 Hub , serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:011 (path=(null), vid=05ac, pid=1006, manuf=Apple, Inc., prod=Keyboard Hub, serial=000000000000)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:029:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF01004200)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:061:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF91000200)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:005 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF11004100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:006 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FFC000F000)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:008 (path=(null), vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:010 (path=(null), vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:012 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF30FF01006100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:013 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832373FFFF40FF20006100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:014 (path=(null), vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:253:015 (path=(null), vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:093:002 (path=(null), vid=05ac, pid=8206, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:028:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF00005100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:255:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF22000100)
[2014-03-13 21:29:26] lowlevel_scan: Found usb device at usb:064:002 (path=(null), vid=03eb, pid=204b, manuf=emicrotec, prod=Twinfury, serial=239533832393FFFF91FF51003100)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:Bluetooth_046d_b00d_2097738c (path=Bluetooth_046d_b00d_2097738c, vid=046d, pid=b00d, manuf=Unknown, prod=Ultrathin Touch Mouse, serial=00-1f-20-97-73-8c)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_046d_c52b_fd331100 (path=USB_046d_c52b_fd331100, vid=046d, pid=c52b, manuf=Logitech, prod=USB Receiver, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_1105_fd334000 (path=USB_05ac_1105_fd334000, vid=05ac, pid=1105, manuf=Apple Inc., prod=Display Audio, serial=FB080417)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_9226_fd336000 (path=USB_05ac_9226_fd336000, vid=05ac, pid=9226, manuf=Apple Inc., prod=Apple LED Cinema Display, serial=170408FB)
[2014-03-13 21:29:26] lowlevel_scan: Found hid device at hid:USB_05ac_0221_fd331200 (path=USB_05ac_0221_fd331200, vid=05ac, pid=0221, manuf=Apple, Inc, prod=Apple Keyboard, serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:15000012 (path=/dev/cu.usbmodem4041, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:13000012 (path=/dev/cu.usbmodemff41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:11000012 (path=/dev/cu.usbmodem1c41, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:0b000012 (path=/dev/cu.usbmodemfd341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:09000012 (path=/dev/cu.usbmodemfd511, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:07000012 (path=/dev/cu.usbmodem3d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:05000012 (path=/dev/cu.usbmodem1d21, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:03000012 (path=/dev/cu.usbmodemfd5311, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] lowlevel_scan: Found vcom device at dev_t:01000012 (path=/dev/cu.usbmodemfd5341, vid=0000, pid=0000, manuf=(null), prod=(null), serial=(null))
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemff41
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem4041
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1c41
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] nanofury_lowl_probe: Matched "(null)" serial "(null)", but lowlevel driver is not mcp2210!
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:26] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:26] Timers: Using gettimeofday
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:26] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] erupter: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] icarus: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] antminer: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] cairnsmore: Attempting to open /dev/cu.usbmodem3d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:27] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] antminer: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Attempting to open /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] icarus_gets: No data in 0.10 seconds
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem1d21: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodem3d21: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem1d21
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem1d21
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodem3d21
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5311: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd511: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] cairnsmore: Test failed at /dev/cu.usbmodemfd5341: get 00000000, should: 000187a2
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd341
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5311
[2014-03-13 21:29:28] Acquired exclusive advisory lock on /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd511
[2014-03-13 21:29:28] twinfury: Probing for Twinfury device /dev/cu.usbmodemfd5341
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem1d21: 2, Twinfury 3259333832391910002400
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodem3d21: 2, Twinfury 3259333832391919002000
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5341: 2, Twinfury 3259333832370402001600
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd5311: 2, Twinfury 3259333832370310001600
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd341: 2, Twinfury 3259333832391911001400
[2014-03-13 21:29:28] twinfury: /dev/cu.usbmodemfd511: 2, Twinfury 325933383239190c000f00
[2014-03-13 21:29:30] Found TBF 0a at /dev/cu.usbmodemfd511
[2014-03-13 21:29:30] TBF 0a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 1a at /dev/cu.usbmodem3d21
[2014-03-13 21:29:30] TBF 1a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 2a at /dev/cu.usbmodemfd5311
[2014-03-13 21:29:30] TBF 2a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 3a at /dev/cu.usbmodemfd5341
[2014-03-13 21:29:30] TBF 3a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 4a at /dev/cu.usbmodem1d21
[2014-03-13 21:29:30] TBF 4a: Init: baud=115200
[2014-03-13 21:29:30] Found TBF 5a at /dev/cu.usbmodemfd341
[2014-03-13 21:29:30] TBF 5a: Init: baud=115200

(At the end I don't see, as usual, "bash-3.2$".)

Quote from: nwoolls on March 13, 2014, 02:43:56 PM

Long-story-short, with the current BFGMiner, --scrypt makes it not scan (some of) your USB devices. This has been addressed (in Git) for the new Scrypt ASICs but is not released yet.

I crossed my streams and released a MultiMiner update that scans with --scrypt, meaning USB ASICs won't be detected unless you are using a PR of BFGMiner or building from Git.

Smells like another hotfix Shocked

Edit: can you give this a try please? Pretty sure this only affects Mac users but would like to get a hotfix out either way:

https://www.dropbox.com/s/kin4rvvewoceb83/MultiMiner-2.7.10.app.zip

I gave it a try, but unfortunately the same as before: after scanning for hardware, no devices is detected.
I thought that you had a Mac Pro like me, and that you could test MultiMiner with it, but I was wrong.
At the moment I can mine only with command line via Terminal.
Thanks anyway! Wink

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brunosky on March 13, 2014, 02:07:37 PM

Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D

I think this is actually my bad. Please run the above without --scrypt.

Long-story-short, with the current BFGMiner, --scrypt makes it not scan (some of) your USB devices. This has been addressed (in Git) for the new Scrypt ASICs but is not released yet.

I crossed my streams and released a MultiMiner update that scans with --scrypt, meaning USB ASICs won't be detected unless you are using a PR of BFGMiner or building from Git.

Smells like another hotfix Shocked

Edit: can you give this a try please? Pretty sure this only affects Mac users but would like to get a hotfix out either way:

https://www.dropbox.com/s/kin4rvvewoceb83/MultiMiner-2.7.10.app.zip

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

I was experiencing crashes after a few hours with 2.7.5 -> 2.7.7 on windows 7
I downgraded my .Net install from version 4.5.1 to 4.5 and it's stable now.
hope this helps.

Quote from: Raptor2213 on March 13, 2014, 02:11:57 PM

Quote from: nwoolls on March 13, 2014, 11:57:01 AM

Quote from: Raptor2213 on March 13, 2014, 11:43:25 AM

I don't have that folder. I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7. Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

It's just simpler to use 2.4 and hope it's fixed in the new BFGMiner update that they're working on.

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on March 13, 2014, 11:57:01 AM

Quote from: Raptor2213 on March 13, 2014, 11:43:25 AM

I don't have that folder. I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7. Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

It's just simpler to use 2.4 and hope it's fixed in the new BFGMiner update that they're working on.

brunosky

newbie

Activity: 13

Merit: 0

Quote from: nwoolls on March 13, 2014, 10:52:15 AM

Anything in /Users/brunotre/.bfgminer/bfgminer.conf ? Try deleting that.

Hi Nate,
Unfortunately same as before; this is the new output after deleting the bfgminer.con file:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-13 17:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-13 17:33:47] Started bfgminer 3.10.0
[2014-03-13 17:33:47] CL Platform 0 vendor: Apple
[2014-03-13 17:33:47] CL Platform 0 name: Apple
[2014-03-13 17:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-13 17:33:47] Platform 0 devices: 1
[2014-03-13 17:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-13 17:33:47] Unable to load ati adl library
[2014-03-13 17:33:47] Devices detected:
[2014-03-13 17:33:47] Device (driver=opencl; procs=1)
[2014-03-13 17:33:47] Timers: Using gettimeofday
1 devices listed
bash-3.2$

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on March 13, 2014, 11:43:25 AM

I don't have that folder. I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7. Doesn't seem to be a BFGminer issue.

That reply was to a different user.

It's not a MultiMiner issue if BFGMiner is crashing - that's a BFGMiner issue. 2.7.7 is probably passing in different arguments than 2.4. Try doing some trial-and-error (using the Process Log) to figure out which argument is causing the error and report that to the BFGMiner thread. Thanks!

Raptor2213

full member

Activity: 210

Merit: 100

Quote from: nwoolls on March 13, 2014, 10:49:43 AM

Quote from: Raptor2213 on March 13, 2014, 02:53:10 AM

Please report any BFGMiner crashes in the BFGMiner thread - thanks! I'm not sure on this but Luke may be able to help.

I downgraded to 2.4, and it's not crashing in 2.4 - just the newer versions - such as 2.7.7. Doesn't seem to be a BFGminer issue.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: brunosky on March 13, 2014, 04:43:43 AM

I'm still stuck with MultiMiner, not detecting my devices.
This is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-11 20:33:47] Started bfgminer 3.10.0
[2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf
[2014-03-11 20:33:47] CL Platform 0 vendor: Apple
[2014-03-11 20:33:47] CL Platform 0 name: Apple
[2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-11 20:33:47] Platform 0 devices: 1
[2014-03-11 20:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-11 20:33:47] Unable to load ati adl library
[2014-03-11 20:33:47] Devices detected:
[2014-03-11 20:33:47] Device (driver=opencl; procs=1)
1 devices listed
bash-3.2$

Anything in /Users/brunotre/.bfgminer/bfgminer.conf ? Try deleting that.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Raptor2213 on March 13, 2014, 02:53:10 AM

Code:

Problem signature:
  Problem Event Name: APPCRASH
  Application Name: bfgminer.exe
  Application Version: 0.0.0.0
  Application Timestamp: 057214ed
  Fault Module Name: ntdll.dll
  Fault Module Version: 6.1.7601.18247
  Fault Module Timestamp: 521ea8e7
  Exception Code: c0000005
  Exception Offset: 0003332f
  OS Version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional Information 1: f90c
  Additional Information 2: f90c508888aa2ee82e59ace4953ff971
  Additional Information 3: f83b
  Additional Information 4: f83ba7e2bbc72befdf213e169d547ef7

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt

Please report any BFGMiner crashes in the BFGMiner thread - thanks! I'm not sure on this but Luke may be able to help.

brunosky

newbie

Activity: 13

Merit: 0

Hello Nate,
I'm still stuck with MultiMiner, not detecting my devices.
This is the output:

Code:

bash-3.2$ bfgminer --device ? --scan nanofury:all --scan erupter:all --scan all --scan opencl:auto --scan cpu:auto --scrypt -D
[2014-03-11 20:33:47] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)
[2014-03-11 20:33:47] Started bfgminer 3.10.0
[2014-03-11 20:33:47] Loaded configuration file /Users/brunotre/.bfgminer/bfgminer.conf
[2014-03-11 20:33:47] CL Platform 0 vendor: Apple
[2014-03-11 20:33:47] CL Platform 0 name: Apple
[2014-03-11 20:33:47] CL Platform 0 version: OpenCL 1.2 (Dec 8 2013 21:07:05)
[2014-03-11 20:33:47] Platform 0 devices: 1
[2014-03-11 20:33:47] 0 AMD Radeon HD 7950 Compute Engine
[2014-03-11 20:33:47] Unable to load ati adl library
[2014-03-11 20:33:47] Devices detected:
[2014-03-11 20:33:47] Device (driver=opencl; procs=1)
1 devices listed
bash-3.2$

Thank you

Raptor2213

full member

Activity: 210

Merit: 100

BFGminer's crashing on me again. Any idea what's causing it? I did just fire up a S1. I'm sending it's output to the Stratum server, rather than using the remote feature. I'd rather do that because it allows me to set pools for failover for this exact reason.

Code:

Problem signature:
Problem Event Name: APPCRASH
Application Name: bfgminer.exe
Application Version: 0.0.0.0
Application Timestamp: 057214ed
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000005
Exception Offset: 0003332f
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: f90c
Additional Information 2: f90c508888aa2ee82e59ace4953ff971
Additional Information 3: f83b
Additional Information 4: f83ba7e2bbc72befdf213e169d547ef7

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I just did a fresh install of MuM about a week ago in prep for this to weed out any potential instabilities. Version 2.7.7

ivanlabrie

hero member

Activity: 812

Merit: 1000

Thanks for the clarification Nate. My friend actually figured it out eventually :p

https://bitcointalk.org/index.php?topic=513400.new#new

We'll see about the bandwidth, it scales up pretty quickly. Undecided

124C41

sr. member

Activity: 308

Merit: 250

EVERYTHING YOU CAN IMAGINE IS REAL

Nate FTW!

With the MobileMiner Pools API implementation, will we see updates for native mobile apps soon?

Keep up the great work Nate, I'll be providing feedback here and on http://talk.multiminerapp.com/ as per usual.

Quote from: nwoolls on March 12, 2014, 11:19:10 PM

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

Official support for 1-chip and 5-chip GridSeed ASICs
Notifications are now displayed when Auto-Mining switches to new coins
When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
Coins that fall below strategy configurations are no longer suggested for mining
Improved overall performance
Coin difficulty is read directly from the network once mining begins
Worker temperatures are shown for Network Devices and the Stratum Proxy
Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
Added the option to save coin configurations to all rigs via MultiMiner Remoting
Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

ManeBjorn

legendary

Activity: 1288

Merit: 1004

You are awesome Nate. Cool

Thanks a ton.

Quote from: nwoolls on March 12, 2014, 11:19:10 PM

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

Official support for 1-chip and 5-chip GridSeed ASICs
Notifications are now displayed when Auto-Mining switches to new coins
When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
Coins that fall below strategy configurations are no longer suggested for mining
Improved overall performance
Coin difficulty is read directly from the network once mining begins
Worker temperatures are shown for Network Devices and the Stratum Proxy
Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
Added the option to save coin configurations to all rigs via MultiMiner Remoting
Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

nwoolls

hero member

Activity: 840

Merit: 1002

Version 2.8.0 PR2 (preview / pre-release) is now available for testing. I will be releasing this in a few hours / days barring any negative feedback.

https://www.dropbox.com/s/lh4qwxqi0gs9vxt/MultiMiner-2.8.0.zip

Official support for 1-chip and 5-chip GridSeed ASICs
Notifications are now displayed when Auto-Mining switches to new coins
When minimized to the system tray, an interactive balloon tip is displayed for in-app notifications
Coins that fall below strategy configurations are no longer suggested for mining
Improved overall performance
Coin difficulty is read directly from the network once mining begins
Worker temperatures are shown for Network Devices and the Stratum Proxy
Added the option to Copy / Clone an existing configuration in the Configure Coins dialog
Added support for the MobileMiner Pools API, allowing switching coins from smart phones and browsers
Added the option to save coin configurations to all rigs via MultiMiner Remoting
Customized names for machines and devices are now pushed to MobileMiner

Note that GridSeed support requires BFGMiner 4.0 which is not out yet. If you are running Windows you can try a PR of the BFGMiner GridSeed support here:

https://www.dropbox.com/s/i8cai8x79b79gzo/bfgminer_gridseed_pr2.7z

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: ivanlabrie on March 12, 2014, 10:50:38 PM

https://bitcointalk.org/index.php?topic=513400.new#new

Any thoughts guys? Huh

You can view the contents of the Python script here to check for any other URLs or domains:

https://github.com/Axadiw/CGMinerMobileAdapter/blob/master/CGMinerMobileAdapter.py

It's Open Source so you can read everything it is doing and sending and to whom.

As for bandwidth usage I can confirm this and already talked to the author about it. Make sure you are using his latest version from Git. It submits statistics far less frequently.

ivanlabrie

hero member

Activity: 812

Merit: 1000

https://bitcointalk.org/index.php?topic=513400.new#new

Any thoughts guys? Huh

Topic: MultiMiner: Any Miner, Any Where, on Any Device (Free, Open Source, Cross Platform) - page 70. (Read 827303 times)