Pages:
Author

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 20. (Read 289466 times)

hero member
Activity: 1218
Merit: 534
As much as i liked Nemos , GUI version likes to become nonresponsive , sometimes PS glich out and yeah , its laggy.

Same here. Liked Nemos too... but now I switched to Sniffs.
member
Activity: 142
Merit: 10
agreed due GUI interference and all the laginess i started to check out MindMiner , they going opposite direction , minimalism , responsiveness and low mem footprint. As much as i liked Nemos , GUI version likes to become nonresponsive , sometimes PS glich out and yeah , its laggy.
hero member
Activity: 1218
Merit: 534
After months of doing nothing I booted the old mining rig.

What happend to the good 'ol Nemos? The GUI version is so laggy. Laggy, not buggy.

Is there a way to turn off the gui?
jr. member
Activity: 76
Merit: 1
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks

Are the Cards overclocked ?

With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable.

Even on Reference-Style  1080 TI & 1070 TI

Try 80/50/600

This may help: https://github.com/MrPlusGH/NPlusMiner-Documentation/wiki/Overclocking-and-Prerun

Thanks
Will try to reduce a bit, they are at 75+300
Will see


Thanks
Moved to 100 power ( no cost for me :-) ) + 50 core and 300 mem.
Will see if it's chosen to run again.


Sorry, but no X16S still not working on 1080TI and with the latest Suprminer not working on 1050TI
Will update to the latest master on 1080TI and try.
newbie
Activity: 91
Merit: 0
what needs to be corrected so that cryptonight correctly shows  USD/DAY

Code:
Miner                   Algorithm           Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----                   ---------           ----- -------- ------- ------- ---------- ----
ccminerCryptonight      CryptoNightV7 106,09 KH/s   22,740 0,02274 189,441  214,35510 nicehash-
ccminerCryptonight      CryptoNight   107,43 KH/s    3,184 0,00318  26,529   29,64193 nicehash-
ccminerTpruvotcuda9     HMQ1725         6,27 MH/s    0,476 0,00048   3,968    0,07599 zergpool-
ccminerAlexis78keccakc  Keccakc       995,76 MH/s    0,474 0,00047   3,953    0,00048 zergpool-
ccminerAlexis78         Lyra2RE2       53,79 MH/s    0,363 0,00036   3,028    0,00676 zpool-
ccminerAlexis78         Hsr            16,73 MH/s    0,346 0,00035   2,885    0,02070 zergpool-
ccminerAlexis78         X17            14,59 MH/s    0,312 0,00031   2,602    0,02140 zergpool-
ccminerAlexis78x16rx16s X16r           14,30 MH/s    0,301 0,00030   2,510    0,02106 zergpool-
DSTM                    Equihash      643,93  H/s    0,287 0,00029   2,391  445,75098 nicehash-
ccminerSuprminer        X16s           13,19 MH/s    0,285 0,00029   2,375    0,02162 zergpool-
ccminerAlexis78x16rx16s X16s           13,12 MH/s    0,284 0,00028   2,363    0,02162 zergpool-
ccminerAlexis78         Skein         678,21 MH/s    0,283 0,00028   2,361    0,00042 zergpool-
ccminerKlausT           NeoScrypt       1,44 MH/s    0,283 0,00028   2,361    0,19625 zpool-
jr. member
Activity: 76
Merit: 1
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks

Are the Cards overclocked ?

With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable.

Even on Reference-Style  1080 TI & 1070 TI

Try 80/50/600

This may help: https://github.com/MrPlusGH/NPlusMiner-Documentation/wiki/Overclocking-and-Prerun

Thanks
Will try to reduce a bit, they are at 75+300
Will see


Thanks
Moved to 100 power ( no cost for me :-) ) + 50 core and 300 mem.
Will see if it's chosen to run again.
jr. member
Activity: 154
Merit: 1
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks

Are the Cards overclocked ?

With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable.

Even on Reference-Style  1080 TI & 1070 TI

Thanks
Will try to reduce a bit, they are at 75+300
Will see

Try 80/50/600

This may help: https://github.com/MrPlusGH/NPlusMiner-Documentation/wiki/Overclocking-and-Prerun
jr. member
Activity: 76
Merit: 1
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks

Are the Cards overclocked ?

With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable.

Even on Reference-Style  1080 TI & 1070 TI

Thanks
Will try to reduce a bit, they are at 75+300
Will see
jr. member
Activity: 61
Merit: 4
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks

Are the Cards overclocked ?

With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable.

Even on Reference-Style  1080 TI & 1070 TI
jr. member
Activity: 76
Merit: 1
Hello
For me on zerg:3663 x16s is failing on 1080Ti
with the master from 2 days ago.
Thanks
member
Activity: 514
Merit: 11
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.


I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...

This problem at first start will be fixed in the next version of NPlusMiner.
member
Activity: 514
Merit: 11
Where can I change the port of the mining for the algorithm in the settings?


You cannot, the pool provides it through the API.
If you're talking zergpool: https://bitcointalksearch.org/topic/m.34919344
member
Activity: 514
Merit: 11
https://gyazo.com/955124de35fd8e3e57d195ee71bcc104
Hello, why does it show that im loosing btc while mining ?

A couple possible reasons:

1 - Zergpool is reporting wrong data through the API. It will correct over time. (This happens some time)
2 - Zergpool reviewed estimated values and your total earned goes down. (In this case you should see it on Zergpool website)
newbie
Activity: 10
Merit: 0
https://gyazo.com/955124de35fd8e3e57d195ee71bcc104
Hello, why does it show that im loosing btc while mining ?
newbie
Activity: 52
Merit: 0
Where can I change the port of the mining for the algorithm in the settings?
newbie
Activity: 41
Merit: 0
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.



Stop Nemos, close and start again. It helps me so much.


Try restarting Benchmark
member
Activity: 61
Merit: 10
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.


I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...

Stoping and restarting does not fix the issue for me.

Try stop, save config, restart the hole program. I have to do some times for other reasons.
newbie
Activity: 3
Merit: 0
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.


I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...

Stoping and restarting does not fix the issue for me.
newbie
Activity: 52
Merit: 0
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.


I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...
newbie
Activity: 3
Merit: 0
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards.
The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
Pages:
Jump to: