New Official AMT Thread - page 157. | Bitcointalksearch.org

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: FrictionlessCoin on April 15, 2014, 10:12:51 AM

Anyone know where I can buy those white plastic power connectors?

I may need to source those just in case AMT does replace my broken boards!!

AMT service is so pathetic that I need to go on this board to beg for parts!

Anyway, just in case AMT reads this thread:

I need a BACKPLANE!

I need an RMA to return 3 damaged boards!

Order #961!

EDIT: Pretty sure these are the PCIe socket end (the 6-pin ones), made by Molex from Mouser, poke around the products for it and should find the receptacles w/pins. I'd think Digikey would have them as well. The critical spec is that they are 4.2mm pitch (pin spacing) equiv to the Molex Mini-fit line.

I'm getting some of them myself to replace the PCIe wiring feeding my Ants. All this PSU talk got me to check the voltage drop over the factory cables: 0.75v lost between the PSU and the terminals on the Ants. Gotta remedy that and since the connectors can take up to 12ga wire - perfect solution..

termonator61

full member

Activity: 280

Merit: 100

Hey AMT,

I've tried to contact multiple different emails as well as calling your main office. I have received no response and was wondering if there was a better way to contact you all. Thanks again for all your hard work.

All the best,
Allen Myers
Order #700

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

Anyone know where I can buy those white plastic power connectors?

I may need to source those just in case AMT does replace my broken boards!!

AMT service is so pathetic that I need to go on this board to beg for parts!

Anyway, just in case AMT reads this thread:

I need a BACKPLANE!

I need an RMA to return 3 damaged boards!

Order #961!

timmyd

hero member

Activity: 714

Merit: 500

amt no where to be seen since i posted my miner pics and the frazzled chip that roasted itself. im srill waiting on a response to my email regarding my faulty miner.

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

AMT, I need a BACKPLANE!

To test if the heavily damaged unit you sent me partially works!

You never send me one, so I got this machine that has no way to communicate with its controller!

Can you send me one? Order #961

mrpark

sr. member

Activity: 364

Merit: 250

Please come pick up this miner, the taped together box looks very unprofessional in my office. I DO NOT want another miner. I am calling a lawyer.

jorgebonilla

newbie

Activity: 27

Merit: 0

AMT, when i finally got an email replied from you guys, it was from JIM to tell me that my miners will ship that friday. That was two weeks ago.
No more news after that.

When are you ACTUALLY going to ship my miners or my refund? It is not a difficult question, all i need is a date and you to stick to it.

Order #879 and #880

mellorbo

hero member

Activity: 620

Merit: 500

Quote from: regtable69 on April 15, 2014, 08:13:39 AM

Quote from: ?? on ??

Quote from: regtable69 on April 15, 2014, 07:52:13 AM

Quote from: ?? on ??

Quote from: mellorbo on April 15, 2014, 04:58:14 AM

as promised here is a 24hr (slightly over) graph from my miner.
still running smooth with no issues atm.

Locking good mell Wink

and working Cheesy

From what i can see the average is around 520GH right just as advertised -
AMT: congrats there is one miner working in the wiled Once again i admit it works Grin

10X
If the above is true then
5 blades would be 520 / 3 *5 866 GH
6 blades 1040 GH

To all customers - you are scammed if you got 5 blades for 1.2 Miner that means you will get 866GH instead
if you got 6 blades by accident Grin

it would be 1040 GH
And the above would be true only if you have the mell luck to receive some crap that works

I am not mentioning the power consumption though Grin

Ask for your money people! Immediate refund!

204+204+204=612ghs this is how the unot should be performing. soooo 204*5 iiiisssss 1020g which is in the nominal mode. turbo mode you would pull about 1.2-3/4 possibly seen as when we put out 700-750 with a lot more room for improvement or so i believe. because these a1 chips all they need is adequate cooling and you can boost the clocks something rotten. check out a1 chip threads or related threads like. coindesk. bitmine. i could see one card doing 4-500gh minimum if cooled correctly.

Agreed COMPLETELY!
BUT AMT CRAP IS NOT PERFORMING AS SHOWN IN THE POOL GRAPH
PERIOD Grin

MELL thre modules are making 520 on average that is damn sure

that is my miner also. pool graphs especially cex.io are not 100% reliable. nonces stale shares and so on all lower the end hash. its doing the 520 we paid for so were happy for now. we need to figure if its the cooling thats stalling the cards. i.e temp cut offs being reached or if its something else.

agreed it will hash via the cgminer on the pi and it does hash higher towards the 600gh mark.
i just wanted to get one graph up stable out of the box so to speek and work from there.
i will keep you all posted on how its going.

regtable69

hero member

Activity: 588

Merit: 500

Quote from: ?? on ??

Quote from: regtable69 on April 15, 2014, 07:52:13 AM

Quote from: ?? on ??

Quote from: mellorbo on April 15, 2014, 04:58:14 AM

as promised here is a 24hr (slightly over) graph from my miner.
still running smooth with no issues atm.

Locking good mell Wink

and working Cheesy

From what i can see the average is around 520GH right just as advertised -
AMT: congrats there is one miner working in the wiled Once again i admit it works Grin

10X
If the above is true then
5 blades would be 520 / 3 *5 866 GH
6 blades 1040 GH

To all customers - you are scammed if you got 5 blades for 1.2 Miner that means you will get 866GH instead
if you got 6 blades by accident Grin

it would be 1040 GH
And the above would be true only if you have the mell luck to receive some crap that works

I am not mentioning the power consumption though Grin

Ask for your money people! Immediate refund!

204+204+204=612ghs this is how the unot should be performing. soooo 204*5 iiiisssss 1020g which is in the nominal mode. turbo mode you would pull about 1.2-3/4 possibly seen as when we put out 700-750 with a lot more room for improvement or so i believe. because these a1 chips all they need is adequate cooling and you can boost the clocks something rotten. check out a1 chip threads or related threads like. coindesk. bitmine. i could see one card doing 4-500gh minimum if cooled correctly.

Agreed COMPLETELY!
BUT AMT CRAP IS NOT PERFORMING AS SHOWN IN THE POOL GRAPH
PERIOD Grin

MELL thre modules are making 520 on average that is damn sure

that is my miner also. pool graphs especially cex.io are not 100% reliable. nonces stale shares and so on all lower the end hash. its doing the 520 we paid for so were happy for now. we need to figure if its the cooling thats stalling the cards. i.e temp cut offs being reached or if its something else.

regtable69

hero member

Activity: 588

Merit: 500

Quote from: ?? on ??

Quote from: mellorbo on April 15, 2014, 04:58:14 AM

as promised here is a 24hr (slightly over) graph from my miner.
still running smooth with no issues atm.

Locking good mell Wink

and working Cheesy

From what i can see the average is around 520GH right just as advertised -
AMT: congrats there is one miner working in the wiled Once again i admit it works Grin

10X
If the above is true then
5 blades would be 520 / 3 *5 866 GH
6 blades 1040 GH

To all customers - you are scammed if you got 5 blades for 1.2 Miner that means you will get 866GH instead
if you got 6 blades by accident Grin

it would be 1040 GH
And the above would be true only if you have the mell luck to receive some crap that works

I am not mentioning the power consumption though Grin

Ask for your money people! Immediate refund!

204+204+204=612ghs this is how the unot should be performing. soooo 204*5 iiiisssss 1020g which is in the nominal mode. turbo mode you would pull about 1.2-3/4 possibly seen as when we put out 700-750 with a lot more room for improvement or so i believe. because these a1 chips all they need is adequate cooling and you can boost the clocks something rotten. check out a1 chip threads or related threads like. coindesk. bitmine. i could see one card doing 4-500gh minimum if cooled correctly.

mrpark

sr. member

Activity: 364

Merit: 250

Quote from: firejuan on April 15, 2014, 03:01:23 AM

Name:   AMT_miners
Posts:   444
Activity:   196
Position:   Full Member
Date Registered:   September 29, 2013, 03:48:09
Last Active:   Today at 02:40:29

They stopped by...but didn't leave any updates

AMT Miners please address my concerns. I have an email stating you would have FedEx come pick up this miner on Monday, no such thing has happened. I know another day is nothing to you, but I've been waiting months to have this issue resolved. Please come pick up this gigantic miner, I DO NOT want you to ship another one. I am done talking and joining the lawsuit unless I get a refund ASAP. I am not waiting any longer, let me know today what you would like to do here.

FrictionlessCoin

legendary

Activity: 868

Merit: 1000

Cryptotalk.org - Get paid for every post!

Still waiting for a response for my damaged boards and missing backplane.

Order #961 ... I got a pending case with Delaware Consumer Affairs.

I will give them a call today. To further discuss the issue.

mellorbo

hero member

Activity: 620

Merit: 500

as promised here is a 24hr (slightly over) graph from my miner.
still running smooth with no issues atm.

firejuan

sr. member

Activity: 256

Merit: 250

Because it's sterile...

Name:   AMT_miners
Posts:   444
Activity:   196
Position:   Full Member
Date Registered:   September 29, 2013, 03:48:09
Last Active:   Today at 02:40:29

They stopped by...but didn't leave any updates

timmyd

hero member

Activity: 714

Merit: 500

Still awaiting a response to my email regarding my faulty miner

plp

newbie

Activity: 39

Merit: 0

DID ANY ONE GET THE PI TO RECOGNIZE THE BOARDS ?

NaranKPatel

member

Activity: 81

Merit: 10

Quote from: ?? on ??

You can follow deleted posts at bitcointa.lk I believe. So the self-moderated function doesn't make it all go away. Also the way many threads DEVOLVE at an ever increasing frequency I don't think it says anything about the fabricator if they use unmoderated or self-moderated. It is probably necessary to start a self-moderated thread right off the bat for Fabricators just to keep things on track especially if things go wrong during fabrication, as this is typical at some point in the production process, and you want to get out the basic information required. The Mods have not really been on top of spam, and off topic posts so you are way better off self-moderating as producer than leaving it to the forum.

Having said all that I am hoping that AMT does get their shit together as there seems to be a lot valid complaints and I hope they can rectify each and everyone of them to the customers satisfaction. We need more companies here that can fix problems when they are created. I wish the customers get immediate resolutions to their issues that is the only way to keep threads "on-point".

+1

YourPalToots

sr. member

Activity: 294

Merit: 250

Quote from: ?? on ??

In my case, it has reached critical mass. I read on the other thread they are now accusing customers of damaging equipment for RMA. I take offence to this. I did nothing of the sort. They did not come get the miner on Monday as they said they would.

I really took offense to that as well. How dare they. I wrote them an email about it before I started posting photos of the damage. They never responded and still haven't. Not once did I ask for a refund or RMA. The only thing I have requested is instructions or a diagram or chicken scratch on a fucking napkin. Anything that would give any hint on how to put this pile of shit together and hashing.

I forgave them for being late.
I forgave them for no communication.
I forgave them for not having cases.
I forgave them for not sending a power supply.

And when they send a unit out without any QC or protection during shipping. They play the little bitch victim.

Why would I take everything apart to put it back together half ass to take pictures of me taking it apart again to put it back together properly to take it apart again to put it back together.

Fucking retarded.

AND I start posting pictures so that others can possibly figure out how to get their miners working without sending them back and all they do is get butthurt.

tonyca

member

Activity: 83

Merit: 10

AMT_Miners,

I got same situation, please ship my 2 miners. Jim told me supposed ship couple of times but never happened. Jim told me again last Thursday,ship out Friday, Friday passed,still nothing. Saturday Alyssa told me you guys expedite my miners. according to your previously post, you guys assemble 15 full miners per day.so please ship my miners on April 15,2014.

If you still can not ship my working miners, please kindly do simple refund to me with Bitpay currently bitcoin market rates to refund me to my bitcoin address as I provided earlier in my email address.

You action is required.

Thanks,
Tony

Chazaki

full member

Activity: 181

Merit: 100

The All-in-One Cryptocurrency Exchange

I still have not heard any updates regarding my order #899 since they told me Wednesday of last week that I would receive tracking info either Thursday or Friday of last week. I decided to give AMT the benefit of the doubt when I heard of other lawsuits transpiring against them - part naivete, part hoping they turn things around. The latter obviously has not happened.

I am therefore giving AMT until Wednesday of this week (April 16th) to contact me with an update regarding my order AS WELL AS tracking number(s) for my two 1.2 TH/s miners before contacting my attorney to pursue legal action. I am tired of writing unanswered emails, ignored posts, and making fruitless phone calls during normal business hours. I simply am not going to waste my time anymore on this nonsense.

What happens next is up to you AMT.

Topic: New Official AMT Thread - page 157. (Read 149472 times)