I'm not at home but DHL confirms delivery. Will post pictures as soon as I can.
Thanks...an unboxing would be excellent to see. I am planning my own unboxing once the hardware arrives.
Topic: New Official AMT Thread - page 18. (Read 149482 times)
Thanks...an unboxing would be excellent to see. I am planning my own unboxing once the hardware arrives.
I'm not at home but DHL confirms delivery. Will post pictures as soon as I can.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Did as you said. Still no lights on the top board with the second board two cables detached.
I also switched the cables from the top to the bottom card and the second card still functions. So its not the cables or the connection to the motherboard.
Let me know what else to try.
Thanks in Advance.
Didn't you say that you received two miners?
Yes, my brother is going to setup the second one at his house. He's still at work. Will let you know how his works.
Thanks,
Well the idea was to test the draw from outlet, but from what you said after it looks maybe a board may be bad which we'll replace quickly. But test the other miner just to make sure you dont have a similar problem.
Will do, thanks. He's going to test tonight or tomorrow.
Thank you
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Did as you said. Still no lights on the top board with the second board two cables detached.
I also switched the cables from the top to the bottom card and the second card still functions. So its not the cables or the connection to the motherboard.
Let me know what else to try.
Thanks in Advance.
Didn't you say that you received two miners?
Yes, my brother is going to setup the second one at his house. He's still at work. Will let you know how his works.
Thanks,
Well the idea was to test the draw from outlet, but from what you said after it looks maybe a board may be bad which we'll replace quickly. But test the other miner just to make sure you dont have a similar problem.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Did as you said. Still no lights on the top board with the second board two cables detached.
I also switched the cables from the top to the bottom card and the second card still functions. So its not the cables or the connection to the motherboard.
Let me know what else to try.
Thanks in Advance.
Didn't you say that you received two miners?
Yes, my brother is going to setup the second one at his house. He's still at work. Will let you know how his works.
Thanks,
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Did as you said. Still no lights on the top board with the second board two cables detached.
I also switched the cables from the top to the bottom card and the second card still functions. So its not the cables or the connection to the motherboard.
Let me know what else to try.
Thanks in Advance.
Didn't you say that you received two miners?
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Did as you said. Still no lights on the top board with the second board two cables detached.
I also switched the cables from the top to the bottom card and the second card still functions. So its not the cables or the connection to the motherboard.
Let me know what else to try.
Thanks in Advance.
I received a package today from China via DHL. Turned out to be a 1Th miner from AMT! I've ran it for 3 hours (too hot right now, ill run it full time later) and it was getting between 1-1.2Th/s. It was so loud and hot though, I had to turn it off until I can find a better placement for it.
It came with only a power cord and nothing else. No documentation at all. Two USB and one ethernet port. The interface is super simple, about as simple as you can get.
Once I get shell access to it I can explore more. I definitely plan on writing a better interface than this one at the very least though, that's for sure.
I had no shipping notice and it was a complete surprise that it arrived today. I hope to hear from them about what they plan to do for the MPP though, be it hosted mining or extra hardware.
But I did get the unit and for 3 hours it hashed at about the advertised rates. I guess only time will tell if the unit will succeed.
It came with only a power cord and nothing else. No documentation at all. Two USB and one ethernet port. The interface is super simple, about as simple as you can get.
Once I get shell access to it I can explore more. I definitely plan on writing a better interface than this one at the very least though, that's for sure.
I had no shipping notice and it was a complete surprise that it arrived today. I hope to hear from them about what they plan to do for the MPP though, be it hosted mining or extra hardware.
But I did get the unit and for 3 hours it hashed at about the advertised rates. I guess only time will tell if the unit will succeed.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
What the heck! I was about to recontact AMT to give them my vitals so that I can send payment for 10 of their miners.
AMT, do these miners come with manuals and support? Sure as heck I don't want to be spending all my time just trying to get these to work.
I look forward to your reply.
Boi
We're working on that. But the equipment is fine. The users that are now posting are users that have received desktop models not rack mount models. Just the casing is different but the boards/modules and operating system are the same. If you go ahead with this purchase we can realistically say the units will not ship until Friday afternoon and they'll arrive on Tuesday or Wednsday at the latest. The units your purchasing are these:
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
What the heck! I was about to recontact AMT to give them my vitals so that I can send payment for 10 of their miners.
AMT, do these miners come with manuals and support? Sure as heck I don't want to be spending all my time just trying to get these to work.
I look forward to your reply.
Boi
AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
DHL just attempted to deliver 4 packages to me from AMT in Hong Kong (i believe).
I cancelled my orders months ago, and have not yet received a refund.
I have not received any shipping notice, or a list of whats in the packages. DHL will attempt delivery again tomorrow and per my legal counsel i will likely decline the delivery and have it sent back to AMT.
My order #'s were #15xx for 2 x 1.2 Th/s Miners, and 2 x 3.2Th/s Miners (which they do not even produce).
I cancelled my orders months ago, and have not yet received a refund.
I have not received any shipping notice, or a list of whats in the packages. DHL will attempt delivery again tomorrow and per my legal counsel i will likely decline the delivery and have it sent back to AMT.
My order #'s were #15xx for 2 x 1.2 Th/s Miners, and 2 x 3.2Th/s Miners (which they do not even produce).
Interesting, did AMT even inform you prior that they will be sending you boxes?
We did not send you one Carlos, calm down.
Well I also requested a refund months ago. Still waiting for that refund.
We know you did and yes that's true.
So, do I have to comission the debt collectors to collect the $6,000 you owe me?
You wouldn't be the first one to do it, but you can try. Carlos come on man, you know where we're at, you follow us pretty well. You've been pretty nice recently, we've noticed that and when this crap with imet gets settled in the list.
Well, to be honest, I haven't the slightest clue as to where you are at?
Do you have an official address for me to course my inquiries?
AMT,
I've managed to connect to the web interface and input my credentials for BTC Guild. The interface says "running" but nothing is showing up on BTC Guild's dashboard. After a couple of minutes your interface says "stopped".
Can you assist? I've left a VM on your support line as well.
Thanks
I've managed to connect to the web interface and input my credentials for BTC Guild. The interface says "running" but nothing is showing up on BTC Guild's dashboard. After a couple of minutes your interface says "stopped".
Can you assist? I've left a VM on your support line as well.
Thanks
What's the url your using to connect to btcguild?
I've tried both the following:
stratum+tcp://stratum.btcguild.com:3333
stratum.btcguild.com:3333
Account name is my worker name that I have been using..
How about the difficulty setting on the miner? 1024?
I had left the difficulty to the default which was 256. Just changed it to 1024 - still same issue.
Thanks in Advance.
Ok change it back to 256. And make sure the worker on btc guild is 256 as well. Does BTCguild detect the worker and is just showing a zero hash rate? Or the worker doesn't even show up?
Showing offline in BTC Guild. Its showing zero hash rate and offline. Reset BTC guild and AMT to 256 and tested. Still same issue.
Turned off and turned the unit back on. Still no hashing and the air is still cool.
first try a different pool.
second check your router to make sure its not blocking the miner in some way. It seems like the issue is network related, check your router's settings. Some have automatic firewalls for unrecognized machines.
third open the miner and make sure all the plugs are connected tightly and the lights from the modules are working as well.
Ok, so I had plugged in the main motherboard but did not put in the power to the cards. Plugged them in.
The top card - no lights are coming on.
Other cards below - lights are flashing
However, now the web interface is dead. I cant connect to the web interface via IE or Chrome.
I also pulled the power cable out of the top card just to see if the web interface comes up and still no interface.
So one card is not initializing (unless the blinking lights mean the same). and cannot access web interface now.
Let me know how to proceed.
Thanks in Advance
Jump to: