I need a linux console release!
Topic: NiceHash Miner - easy-to-use best-profit multi-device cryptocurrency miner - page 25. (Read 170783 times)
January 29, 2017, 12:31:14 PM
there are news about the linux release of nicehash miner?
I need a linux console release!
I need a linux console release!
January 29, 2017, 03:44:16 AM
According to this: https://bitcointalksearch.org/topic/ann-luna-lunacoin-powpos-scrypt-rewardreferral-system-0-premined-1748320 - it is using Scrypt algorithm, so yes, it is possible. Just select Scrypt algorithm when placing orders. Before that, you should find some decent pools of course.
January 29, 2017, 02:33:51 AM
Even though i am a veteran in trading, I am absolutely new in mining. So I am sorry if my question sounds a little stupid.
I want to mine lunacoin. Is it possible through this miner?
I want to mine lunacoin. Is it possible through this miner?
January 28, 2017, 08:31:09 PM
Gyus,
when NicehashMiner starts it also starts the nvidiasetp0state.exe. But there I have access denied. Can someone tell my why?
Thank you
[ChangeP0State] Num GPUs: 2
[ChangeP0State] GetClocks Start Process: -i 0 -q -d SUPPORTED_CLOCKS
[ChangeP0State] Exception: Access is denied
[ChangeP0State] GetClocks Start Process: -i 1 -q -d SUPPORTED_CLOCKS
[ChangeP0State] Exception: Access is denied
when NicehashMiner starts it also starts the nvidiasetp0state.exe. But there I have access denied. Can someone tell my why?
Thank you
[ChangeP0State] Num GPUs: 2
[ChangeP0State] GetClocks Start Process: -i 0 -q -d SUPPORTED_CLOCKS
[ChangeP0State] Exception: Access is denied
[ChangeP0State] GetClocks Start Process: -i 1 -q -d SUPPORTED_CLOCKS
[ChangeP0State] Exception: Access is denied
January 26, 2017, 05:40:06 PM
monitor is disconnected and yeah, this was over teamviewer... so that's not the problem obviously...
Obvious for a medium, maybe...
Anyway, have you checked your power usage (gpu's not starved for power) ? tried with stock clock ? checked if riser don't have an issue ? tried ddu-uninstall drivers and reinstall ? what drivers version are u using ?
January 26, 2017, 01:41:11 PM
Anyone having problems with 5 rx480 setup mining ethhash with sgminer? Using latest nhm. 4 cards work well while 5th card says it's running at 4MH/s...
See pic:
https://i.imgur.com/BJDJrSs.png
Have no idea why this happens?
See pic:
https://i.imgur.com/BJDJrSs.png
Have no idea why this happens?
disconnect your monitor and use remote tools like teamviewer or VNC
monitor is disconnected and yeah, this was over teamviewer... so that's not the problem obviously...
January 26, 2017, 12:47:29 PM
Anyone having problems with 5 rx480 setup mining ethhash with sgminer? Using latest nhm. 4 cards work well while 5th card says it's running at 4MH/s...
See pic:
Have no idea why this happens?
See pic:
Have no idea why this happens?
Yes 1.4.2 is unstable for me, causes RX480 systems to crash.
I went back to 1.4.1 and disabled ETH for now.
There is a thread over on Github about the issues
January 26, 2017, 12:46:40 PM
Anyone having problems with 5 rx480 setup mining ethhash with sgminer? Using latest nhm. 4 cards work well while 5th card says it's running at 4MH/s...
See pic:
Have no idea why this happens?
See pic:
Have no idea why this happens?
disconnect your monitor and use remote tools like teamviewer or VNC
January 26, 2017, 12:09:07 PM
Anyone having problems with 5 rx480 setup mining ethhash with sgminer? Using latest nhm. 4 cards work well while 5th card says it's running at 4MH/s...
See pic:
https://i.imgur.com/BJDJrSs.png
Have no idea why this happens?
See pic:
https://i.imgur.com/BJDJrSs.png
Have no idea why this happens?
January 24, 2017, 11:18:08 PM
@alucard20724,
Did you make clean install or did you copy your old config over the new version?
Did you make clean install or did you copy your old config over the new version?
I did a clean install. I think what is happening is that the settings for sgminer is over-riding my fan settings for msi afterburner each time sgminer is run with which ever algorythm it set at that time which is much lower (set to 15%) than the setting i had in msi.
Does disabling AMD Temperature Control help?
http://imgur.com/ZAhSO5S
it is enabled by default so sgminer is overriding the settings.
"disable AMD Temperature Control" is not enabled, nor was it ever enable. I'm running MSI afterburner to control settings. I already know sgminer is overriding the settings. I've stated both of these in the post you quoted... that's the problem sgminer is over riding the settings and making the fans spin at lower speeds. setting the launch parameters in nicehash miner doesn't fix the problem either.
January 24, 2017, 09:05:42 AM
@alucard20724,
Did you make clean install or did you copy your old config over the new version?
Did you make clean install or did you copy your old config over the new version?
I did a clean install. I think what is happening is that the settings for sgminer is over-riding my fan settings for msi afterburner each time sgminer is run with which ever algorythm it set at that time which is much lower (set to 15%) than the setting i had in msi.
Does disabling AMD Temperature Control help?
http://imgur.com/ZAhSO5S
it is enabled by default so sgminer is overriding the settings.
January 24, 2017, 08:26:30 AM
@alucard20724,
Did you make clean install or did you copy your old config over the new version?
Did you make clean install or did you copy your old config over the new version?
I did a clean install. I think what is happening is that the settings for sgminer is over-riding my fan settings for msi afterburner each time sgminer is run with which ever algorythm it set at that time which is much lower (set to 15%) than the setting i had in msi.
January 24, 2017, 07:11:29 AM
@alucard20724,
@aarons6
Did you make clean install or did you copy your old config over the new version?
@evakka
As a seller, you can only earn bitcoins at NiceHash.
However, if you want to get Monero, you can buy hashing power for CryptoNight and mine yourself some XMR (Monero).
@aarons6
Did you make clean install or did you copy your old config over the new version?
@evakka
As a seller, you can only earn bitcoins at NiceHash.
However, if you want to get Monero, you can buy hashing power for CryptoNight and mine yourself some XMR (Monero).
yes clean install.. i did temporary fixed it by removing auto-fan and temp-target and setting the fan manual to 65
i still have msi afterburner on a custom fan curve which still seems to be working... so something in the temp-target and auto-fan messes it up.
January 24, 2017, 04:35:06 AM
Nicehash service has never worked that way. You'd have to use a Monero-specific pool and Monero-specific mining software.
And why it asks for a Bitcoin address/wallet?
Because you need to read their website, and this way you'll know they pay in BTC directly, whatever the mined algorythm, hence why they speak about algo, and never about coins.
January 24, 2017, 04:18:56 AM
Nicehash service has never worked that way. You'd have to use a Monero-specific pool and Monero-specific mining software.
And why it asks for a Bitcoin address/wallet?
January 24, 2017, 12:25:05 AM
something is wrong with sgminer and daggerhashimoto with my rx cards..
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
i had the exact same problem with this latest. I had to set --gpufan 90 in the settings for daggerhashimoto... in the settings, it had --gpufan 35-95
i had to go back to 1.7.4.1, because the latest kept dropping my fan speeds to below what i want them at. and it overrides fans speed settings with msi afterburner.
January 23, 2017, 11:17:57 PM
something is wrong with sgminer and daggerhashimoto with my rx cards..
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
i had the exact same problem with this latest. I had to set --gpufan 90 in the settings for daggerhashimoto... in the settings, it had --gpufan 35-95
January 23, 2017, 10:56:13 PM
something is wrong with sgminer and daggerhashimoto with my rx cards..
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
edit two, i think it might be something with sgminer and msi afterburner custom fan profile.. anyone else having any issues?
the fans dont spin, they are at like 600 rpm and temps go up and the cards turn off.
i tried to set the target temp to 65 instead of 75 but it doesnt help, the fans spin up to 3000 rpm for a second or two but then drop right back down to under 1000 rpm.
edit, it seems it does it with the pc with my r9 380s too.. altho those cards dont get hot enough to shut down, just run at 78c with 700 fan
edit two, i think it might be something with sgminer and msi afterburner custom fan profile.. anyone else having any issues?
January 23, 2017, 03:21:24 PM
Nicehash service has never worked that way. You'd have to use a Monero-specific pool and Monero-specific mining software.
January 23, 2017, 10:04:28 AM
In NiceHash Miner desktop app asks only for a Bitcoin wallet
With CPU mining I would like to keep Monero and not having them into Bitcoin.
Is this doable?
Also, does the option exist on having the desktop app running in several PC's under the same account/wallet so to combine the H/s (as minergate has)
With CPU mining I would like to keep Monero and not having them into Bitcoin.
Is this doable?
Also, does the option exist on having the desktop app running in several PC's under the same account/wallet so to combine the H/s (as minergate has)
Jump to: