NiceHash Miner - easy-to-use best-profit multi-device cryptocurrency miner - page 26.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

NiceHash Miner ^{v1.7.4.1 Patch}

Re-Download full version from:
https://github.com/nicehash/NiceHashMiner/releases/download/1.7.4.1/NiceHashMiner_v1.7.4.1.zip

Or download patch only:
https://github.com/nicehash/NiceHashMiner/releases/download/1.7.4.1/NiceHashMiner_v1.7.4.x_patch.zip

the problem that i was having with my mixed GPU system that i posted about a few post back, does not present itself with the "Re-Download full version"

aarons6

legendary

Activity: 1736

Merit: 1006

trying the new version with my rx470s and some reason cryptonight is about half the speed of the benchmark..
the benchmark showing 570ish per card, but when it mines i only get 250ish per card..

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

Quote from: alucard20724 on January 18, 2017, 09:19:37 AM

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.1

Download:
https://www.nicehash.com/?p=nhmintro

Changes:

Fixed critical bug: https://github.com/nicehash/NiceHashMiner/issues/522

i'll get the same error with daggerhashimoto also

error just showed up in equihash (eqm. GTX1070), so it's not a specific hash algorythm problem, but the nicehash miner itself.

Try downloading this patch and replace it with the old one in NiceHashMiner_v1.7.4.1 folder.

7 systems it runs fine... even a system with a couple ATI 5850 set at -a 3 for cryptonight.

one system however, which is my main system, it literally shuts the system down after a couple hours. as in, it turns off the power... i.e. hard shutdown.

it's a mixed system with one GTX 170, one RX 470 and two 290X. Windows 10, amd drivers 16.12.2 and nvidia drivers 376.33.
system runs flawlessly with NiceHash Miner version 1.7.3.12.

I have eqm v0.4c and claymore zcash 11.1 dropped in their perspective folders of version 1.7.3.12.
and my monitor (Dell 30in ultra with DVI-D) is hooked up to the GTX1070.

however, when i run NiceHash Miner 1.7.4.0 and 1.7.4.1 (1.7.4.x dropped into 1.7.4.0), the system just shuts off randomly while mining.
Also, if i turn the monitor off then turn the monitor back on later, the monitor blanks out a few times in about 5 seconds before staying on steady. MSI afterburner will show usage drops during this time.

this only happens with 1.7.4.0(x)... the problem is non-existent in 1.7.3.12

TXSteve

sr. member

Activity: 342

Merit: 250

Quote from: TXSteve on January 18, 2017, 08:09:10 AM

Please stop assigning random -mport numbers so that we can use claymore's ethman to remote monitor the rigs

or let us assign our own -mport number

We're paying claymores full DevFee and getting a stripped down, clunky, featureless version of Claymores miners

So much easier to use his full versions.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

Quote from: alucard20724 on January 18, 2017, 09:19:37 AM

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.1

Download:
https://www.nicehash.com/?p=nhmintro

Changes:

Fixed critical bug: https://github.com/nicehash/NiceHashMiner/issues/522

i'll get the same error with daggerhashimoto also

error just showed up in equihash (eqm. GTX1070), so it's not a specific hash algorythm problem, but the nicehash miner itself.

Try downloading this patch and replace it with the old one in NiceHashMiner_v1.7.4.1 folder.

just completed on all systems. will post update on the systems 12 hours from now.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.1

Download:
https://www.nicehash.com/?p=nhmintro

Changes:

Fixed critical bug: https://github.com/nicehash/NiceHashMiner/issues/522

i'll get the same error with daggerhashimoto also

error just showed up in equihash (eqm. GTX1070), so it's not a specific hash algorythm problem, but the nicehash miner itself.

TXSteve

sr. member

Activity: 342

Merit: 250

Please stop assigning random -mport numbers so that we can use claymore's ethman to remote monitor the rigs

or let us assign our own -mport number

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.0

Download:
https://github.com/nicehash/NiceHashMiner/releases/tag/1.7.4.0

Changes:

new NVIDIA CryptoNight miner
new eqm v1.0.4c miner. Up to 1-2% speedup depending on cards
AMD Claymore's ZCash AMD GPU Miner v11.1
AMD Claymore's CryptoNight GPU Miner v9.7
AMD OptiminerZ/Zcash v1.4.0

is there a possibility of getting 3rd party cpu miners add?

alucard20724

sr. member

Activity: 703

Merit: 272

one thing i've noticed, is that it doesn't choose the correct -a parameter for Claymore's Cryptonight for 290x and RX series of cards for benching and mining. it always chooses -a 1... i had to put in -a 4 for my cards so that it would mine the correct parameter (i.e. higher hashrate for that parameter)

but it seems like it benches with -a 0.. or whatever it benches with... I've been getting better results with setting either -a 1 or -a 4 for my cards.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: alucard20724 on January 17, 2017, 11:30:00 PM

Quote from: citronick on January 17, 2017, 10:09:51 PM

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.0

Download:
https://github.com/nicehash/NiceHashMiner/releases/tag/1.7.4.0

Changes:

new NVIDIA CryptoNight miner
new eqm v1.0.4c miner. Up to 1-2% speedup depending on cards
AMD Claymore's ZCash AMD GPU Miner v11.1
AMD Claymore's CryptoNight GPU Miner v9.7
AMD OptiminerZ/Zcash v1.4.0

Is "new NVIDIA CryptoNight miner" the EWBF miner?

EWBF is a zcash miner.. i.e. equihash
https://bitcointalksearch.org/topic/ewbfs-cuda-zcash-miner-1707546

cryptonight is XMR AKA Monero

cryptonight is not zcash

Thanks for correcting me there.

Just installed the new version - trying it out now.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: citronick on January 17, 2017, 10:09:51 PM

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.0

Download:
https://github.com/nicehash/NiceHashMiner/releases/tag/1.7.4.0

Changes:

new NVIDIA CryptoNight miner
new eqm v1.0.4c miner. Up to 1-2% speedup depending on cards
AMD Claymore's ZCash AMD GPU Miner v11.1
AMD Claymore's CryptoNight GPU Miner v9.7
AMD OptiminerZ/Zcash v1.4.0

Is "new NVIDIA CryptoNight miner" the EWBF miner?

EWBF is a zcash miner.. i.e. equihash
https://bitcointalksearch.org/topic/ewbfs-cuda-zcash-miner-1707546

cryptonight is XMR AKA Monero

cryptonight is not zcash

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: ?? on ??

NiceHash Miner ^v1.7.4.0

Download:
https://github.com/nicehash/NiceHashMiner/releases/tag/1.7.4.0

Changes:

new NVIDIA CryptoNight miner
new eqm v1.0.4c miner. Up to 1-2% speedup depending on cards
AMD Claymore's ZCash AMD GPU Miner v11.1
AMD Claymore's CryptoNight GPU Miner v9.7
AMD OptiminerZ/Zcash v1.4.0

Is "new NVIDIA CryptoNight miner" the EWBF miner?

thiagobangu

newbie

Activity: 32

Merit: 0

Quote from: nicehash on January 14, 2017, 04:13:02 PM

Hello,

Processing of the last payments took a bit longer this time due to system overload. All payments have now been processed in full.

btw: please follow us on Twitter @NiceHashMining for updates.

Thank you for using our service!

--
Kind regards,
NiceHash.com

Let's have update

nicehash

legendary

Activity: 885

Merit: 1006

NiceHash.com

Hello,

Processing of the last payments took a bit longer this time due to system overload. All payments have now been processed in full.

btw: please follow us on Twitter @NiceHashMining for updates.

Thank you for using our service!

--
Kind regards,
NiceHash.com

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: thiagobangu on January 11, 2017, 12:56:51 PM

I would like to know where I set the gpus fans because everything is automatic and I like to work with them 100%.

MSI Afterburner, set up a custom fan profile.
Also a very good choice under WIndows to handle overclocking, undervolting, and setting power limit.

thiagobangu

newbie

Activity: 32

Merit: 0

Quote from: S74nk0 on January 13, 2017, 08:22:58 AM

Quote from: thiagobangu on January 13, 2017, 08:06:04 AM

Quote from: ?? on ??

View this page https://github.com/nicehash/NiceHashMiner/wiki/Algorithm-ExtraLaunchParameters

No, we're not planing to update the NiceHash Miner yet.

OK.
But I want to define these patterns. Where do i change in your program in claymore zcash?

I want to use -i 8

AMD ClaymoreZcash Equihash

-i (if not set default 4 or ignored if unused)

You can do this int the Settings.
http://imgur.com/a/jmdeO

Update:
Wiki => https://github.com/nicehash/NiceHashMiner/wiki/Algorithm-ExtraLaunchParameters
Source if the Wiki is not up to date => https://github.com/nicehash/NiceHashMiner/blob/master/NiceHashMiner/Miners/Parsing/ExtraLaunchParametersParser.cs

Wow, how wonderful, thank you.

S74nk0

S74nk0

newbie

Activity: 8

Merit: 0

Quote from: thiagobangu on January 13, 2017, 08:06:04 AM

Quote from: ?? on ??

View this page https://github.com/nicehash/NiceHashMiner/wiki/Algorithm-ExtraLaunchParameters

No, we're not planing to update the NiceHash Miner yet.

OK.
But I want to define these patterns. Where do i change in your program in claymore zcash?

I want to use -i 8

AMD ClaymoreZcash Equihash

-i (if not set default 4 or ignored if unused)

You can do this int the Settings.
http://imgur.com/a/jmdeO

Update:
Wiki => https://github.com/nicehash/NiceHashMiner/wiki/Algorithm-ExtraLaunchParameters
Source if the Wiki is not up to date => https://github.com/nicehash/NiceHashMiner/blob/master/NiceHashMiner/Miners/Parsing/ExtraLaunchParametersParser.cs

thiagobangu

newbie

Activity: 32

Merit: 0

Quote from: ?? on ??

View this page https://github.com/nicehash/NiceHashMiner/wiki/Algorithm-ExtraLaunchParameters

No, we're not planing to update the NiceHash Miner yet.

OK.
But I want to define these patterns. Where do i change in your program in claymore zcash?

I want to use -i 8

AMD ClaymoreZcash Equihash

-i (if not set default 4 or ignored if unused)

djoser

member

Activity: 122

Merit: 16

Nicehash -Team,

Just a little feedback on your new cryptonight miner from github (i didn't want to create an account there just for feedback):

https://github.com/nicehash/NiceHashMiner/releases/download/1.7.0.0-dev/ccminer_cryptonight_new.zip

This version did not solve the benchmarking/mining problem on my tiny 750ti!
It still crashes the nvidia kernel driver.

Regards, djoser.

kumax

full member

Activity: 182

Merit: 100

🚀 🌏

Quote from: thiagobangu on January 11, 2017, 05:22:04 PM

Quote from: kumax on January 11, 2017, 03:42:42 PM

No problem.

You can try to play also with other settings to optimize your graphic card for better hashrate results. Wink

How much do you get with your AMD cards?

Zcash
280x 200 h/s
290x 295 h/s

Ether
280x 17 mhs
290x 29 mhs

l you ?

You have quite good results with your cards.

I have GTX 760 and Intel i5-4670 with 16gig RAM. It wasn't (obviously) build for mining purpose, but since I have fixed electricity fee I let nicehash running on it.

On cryptonight algorythm I get:

GPU: 230 H/s
CPU: 120 H/s
+ I let running nicehash on my laptop as well, which is another 100 H/s with CPU

which can gain me from 0,5 to 0,8 usd a day - depends on current profitability.

I know won't get rich with my rig, but for fun and for collecting few satoshi, it is just fine.

Topic: NiceHash Miner - easy-to-use best-profit multi-device cryptocurrency miner - page 26. (Read 170833 times)