Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 23. (Read 5805649 times)
April 09, 2016, 09:46:02 AM
I have the opposite issue on windows 7 with zadig driver. After some failure cgminer redetects the device [which actually is antminer u2 v1.2] as AU3.
April 06, 2016, 01:32:31 PM
Hi there. I have two AU3 devices attached to a machine, but when I launch cgminer, it says that I have an ANU and an AU3 device..
How can I convince it that they are both AU3? Thanks! -t
Did you try hypnosis or asking it very nicely?How can I convince it that they are both AU3? Thanks! -t
Actually, I think zadig would work better, did you zadig them both and unplug/replug after?
Many thanks; This is linux, so I'm not using any USB drivers apart from those that came with Centos..
-t
April 06, 2016, 01:03:54 PM
Hi there. I have two AU3 devices attached to a machine, but when I launch cgminer, it says that I have an ANU and an AU3 device..
How can I convince it that they are both AU3? Thanks! -t
Did you try hypnosis or asking it very nicely?How can I convince it that they are both AU3? Thanks! -t
Actually, I think zadig would work better, did you zadig them both and unplug/replug after?
April 05, 2016, 03:20:04 PM
Hi there. I have two AU3 devices attached to a machine, but when I launch cgminer, it says that I have an ANU and an AU3 device..
How can I convince it that they are both AU3? Thanks! -t
How can I convince it that they are both AU3? Thanks! -t
April 04, 2016, 04:15:55 PM
Updated the opening post with links to Kano's S1/2/3 binaries since people are looking for them and they were removed from github:
https://bitbucket.org/TheKano/cgminer-binaries/src
https://bitbucket.org/TheKano/cgminer-binaries/src
April 02, 2016, 05:34:30 PM
if it's ok to post this here i have a copy of the instruction for the S1 and S3 kano posted here https://github.com/kanoi/cgminer-binaries/tree/master/AntS3 before whatever happen here https://github.com/kanoi/cgminer-binaries/tree/master/AntS3 happen, the links still work or http still work .
I noticed that the github link was dead, too, and posted it in this thread a couple weeks ago. Kano replied with a new link. This info should be in the first post of this thread or something, every S1/S3/S5 owner should update their boxes. 
I copied it here:
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
March 29, 2016, 01:05:10 PM
is there a place i can go to learn how setup ckproxy on ubuntu or OS X
here ?https://bitcointalksearch.org/topic/m.8907589
March 29, 2016, 12:20:21 PM
is there a place i can go to learn how setup ckproxy on ubuntu or OS X
March 26, 2016, 04:32:07 PM
This thread is only for support of the current official cgminer and bitcoin mining so you need to seek help from whoever is maintaining whatever fork you are using. Offtopic, including forks, CPU/GPU, old version and altcoin posts will be deleted.
March 26, 2016, 01:16:46 PM
Just found the link at the very start of this thread for version 4 - what type of coins are those for? ...snip... Getting a USB ASIC to actually be detected and run properly is hit and miss as it is!
Version 4 is for Bitcoin only, that started with 3.8.0, I believe.
4.9.2 is solid for current ASIC hardware that is supported by it. Most ASIC's have CGMiner build into them.
March 26, 2016, 12:06:04 PM
Is there any way to stop cgminer taking over control of my Radeon GPU fan?
Just upgrade to the current version of CGMiner. You must have a really ancient version since GPU support was removed at version 3.8.0 years ago. The current version is 4.9.2 which doesn't touch the GPU.
March 24, 2016, 10:00:55 AM
This is a cgminer thread, I doubt you're in the correct one.
I suppose you want to head to the kano.is thread.
Pretty much the only ones who have enough for me to manually do it for them, are those who didn't setup a payout address and mined with a sizeable amount of hardware or for quite a while before setting the payouts address.
If it's just dust, then the answer will be ... you'll get it some time in the future.
I suppose you want to head to the kano.is thread.
Kano,
For payment dust payments, write to the PM ?
If it's too small, my answer will be ... you'll get it some time in the future.For payment dust payments, write to the PM ?
Pretty much the only ones who have enough for me to manually do it for them, are those who didn't setup a payout address and mined with a sizeable amount of hardware or for quite a while before setting the payouts address.
If it's just dust, then the answer will be ... you'll get it some time in the future.
March 24, 2016, 09:33:19 AM
Hi CK, am a noobie and wonder when the dust payments will be transferred to my wallet. is there a trigger amount?
Thanks!
Thanks!
March 24, 2016, 08:18:45 AM
Hello
What are:
- the OS
- the version of cgminer
- the type of miner
Have you tried running cgminer as SU ?
What are:
- the OS
- the version of cgminer
- the type of miner
Have you tried running cgminer as SU ?
March 23, 2016, 04:17:31 AM
Hi
i'm having this problem
any advice ?
i'm having this problem
Code:
[2016-03-23 09:14:35] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:14:42] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:14:48] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:14:54] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:15:01] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:15:07] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
[2016-03-23 09:15:13] KnC spi: Can not open SPI device /dev/spidev1.0: No such
file or directory
any advice ?
March 18, 2016, 05:06:30 AM
I copied it here:
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
Awesome, thank you for the updated link! I still need to install 4.9.0c on my S1 next time I turn it on, it only has 4.9.0a on it (I'm going to undervolt that thing one of these days...)
Here's the command to see the cgminer version on your antminer when you ssh in, I just checked it with the S5 and it works just fine:
Code:
cgminer-api version
or you can also get the version in the system tab of the UI and also with:
Code:
/usr/bin/cgminer -V
March 17, 2016, 04:33:43 PM
I copied it here:
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
Awesome, thank you for the updated link! I still need to install 4.9.0c on my S1 next time I turn it on, it only has 4.9.0a on it (I'm going to undervolt that thing one of these days...)
Here's the command to see the cgminer version on your antminer when you ssh in, I just checked it with the S5 and it works just fine:
Code:
cgminer-api version
March 17, 2016, 04:18:24 PM
I copied it here:
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
https://bitbucket.org/TheKano/cgminer-binaries/src
Seems that after 4 years someone didn't like the fact I had binaries there
March 17, 2016, 02:38:41 PM
I was looking at the 1st post for an alternative, but it has only S2 an up, no S1....
I'll look in the morning unless you have an answer before.
I'll look in the morning unless you have an answer before.
March 17, 2016, 02:22:25 PM
So one thing I noticed using 4.9.0 on the S5 vs. bitmain fork is that my fans seem to ignore the user defined setting box. I have them set at 60%, but once I install 4.9.0 and restart cgminer the fans kick way up. Is that because the fan speed check box is only recognized by the bitmain fork?
There is also a command you could type when ssh'd into the S1 that would tell you what version of cgminer was running, but I can't recall what the command was, nor do I know if it worked on anything after the S1. It was listed on the github directions, but...
The nice thing on the S5 is that it tells you which version it's running on the "system" page of the UI, pretty neat if you're not sure or if the system has restarted without you noticing
Yup, I posted a screen cap of mine in the S5 thread:There is also a command you could type when ssh'd into the S1 that would tell you what version of cgminer was running, but I can't recall what the command was, nor do I know if it worked on anything after the S1. It was listed on the github directions, but...
For details and installing: https://github.com/kanoi/cgminer-binaries/tree/master/AntS1
It appears this repository has been disabled, is there an updated link? I need to find the S1 update instructions again, thanks. Jump to: