Can someone just verify I am reading this correctly in the README
--enable-avalon4 Compile support for Avalon4/4.1/6 (default disabled)
If I build with this switch it will support the Avalon 6? If so what command line options is available?
Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 20. (Read 5805649 times)
December 05, 2016, 09:22:01 PM
November 24, 2016, 11:27:58 PM
I try to use it to mine a scrypt with a MSI GT 710, but it says plug one (no usb detected)
anyone kind enough to figure out what to do?
The official cgminer only mines bitcoin for the last 4 years. Seek help in the altcoin mining section for unofficial forks of cgminer that still mine other coins.anyone kind enough to figure out what to do?
Remember the days of cgminer or bfgminer & cgwatcher, oh the good ole days. Now most updates in GUI have made everything plug & play, don't miss the command line of mining years one bit. Somewhat like all software over the years, Windows or Mac & Linux (Linux greatly changing over the years, most people in the world don't even know there's that many operating systems).
//Still testing with low end GPU's was a bit of fun, but quickly overtaken by new hardware & or new technology
November 24, 2016, 08:32:02 AM
I try to use it to mine a scrypt with a MSI GT 710, but it says plug one (no usb detected)
anyone kind enough to figure out what to do?
The official cgminer only mines bitcoin for the last 4 years. Seek help in the altcoin mining section for unofficial forks of cgminer that still mine other coins. anyone kind enough to figure out what to do?
November 24, 2016, 12:44:41 AM
I'm pleased to announce that both Kano and I have received gratis A7 units from canaan for continued support of these new devices in the official cgminer branch.
November 19, 2016, 08:23:42 AM
RES is what you are using.
VIRT Is either swapped or unused.
VIRT Is either swapped or unused.
Oh right, my mistake! Even so, the footprint is quite low!
November 18, 2016, 07:16:41 PM
RES is what you are using.
VIRT Is either swapped or unused.
VIRT Is either swapped or unused.
November 17, 2016, 10:39:58 AM
I am using about 2MB:
top - 15:37:09 up 15 days, 23:28, 4 users, load average: 0,65, 0,50, 0,54
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
%Cpu(s): 21,8 us, 30,4 sy, 0,0 ni, 47,7 id, 0,0 wa, 0,0 hi, 0,1 si, 0,0 st
KiB Mem : 8175192 total, 1690912 free, 1833060 used, 4651220 buff/cache
KiB Swap: 4194300 total, 3172364 free, 1021936 used. 5927048 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10588 root 10 -10 2011988 8248 1732 S 2,0 0,1 249:20.91 cgminer
running this:
0: BAJ FTWS9K4J: max 35C 0.99V | 4.585G / 4.642Gh/s WU: 64.7/m A:545664 R:2304 HW: 934
4: ANU 0 : 256MHz | 4.053G / 2.052Gh/s WU: 21.4/m A:179712 R: 512 HW:61044
9: ANU 5 : 256MHz | 1.353G / 2.050Gh/s WU: 28.6/m A:231776 R: 416 HW: 632
10: ANU 6 : 256MHz | 1.328G / 2.053Gh/s WU: 28.6/m A:239200 R: 704 HW: 426
19: ANU 11 : 256MHz | 2.561G / 2.050Gh/s WU: 28.2/m A:156960 R: 448 HW: 2616
22: ANU 14 : 256MHz | 5.022G / 2.041Gh/s WU: 24.8/m A:139936 R: 640 HW:20040
23: ANU 15 : 256MHz | 2.161G / 2.054Gh/s WU: 28.2/m A: 70048 R: 192 HW: 1298
24: ANU 16 : 256MHz | 4.147G / 2.054Gh/s WU: 28.2/m A: 69664 R: 256 HW: 1216
31: BXM 13 : | 3.994G / 3.995Gh/s WU: 56.0/m A: 64608 R: 736 HW: 0
32: BXM 14 : | 4.597G / 4.572Gh/s WU: 64.1/m A: 73696 R: 128 HW: 0
33: BXM 15 : | 4.200G / 4.185Gh/s WU: 58.6/m A: 66400 R: 512 HW: 0
top - 15:37:09 up 15 days, 23:28, 4 users, load average: 0,65, 0,50, 0,54
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
%Cpu(s): 21,8 us, 30,4 sy, 0,0 ni, 47,7 id, 0,0 wa, 0,0 hi, 0,1 si, 0,0 st
KiB Mem : 8175192 total, 1690912 free, 1833060 used, 4651220 buff/cache
KiB Swap: 4194300 total, 3172364 free, 1021936 used. 5927048 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10588 root 10 -10 2011988 8248 1732 S 2,0 0,1 249:20.91 cgminer
running this:
0: BAJ FTWS9K4J: max 35C 0.99V | 4.585G / 4.642Gh/s WU: 64.7/m A:545664 R:2304 HW: 934
4: ANU 0 : 256MHz | 4.053G / 2.052Gh/s WU: 21.4/m A:179712 R: 512 HW:61044
9: ANU 5 : 256MHz | 1.353G / 2.050Gh/s WU: 28.6/m A:231776 R: 416 HW: 632
10: ANU 6 : 256MHz | 1.328G / 2.053Gh/s WU: 28.6/m A:239200 R: 704 HW: 426
19: ANU 11 : 256MHz | 2.561G / 2.050Gh/s WU: 28.2/m A:156960 R: 448 HW: 2616
22: ANU 14 : 256MHz | 5.022G / 2.041Gh/s WU: 24.8/m A:139936 R: 640 HW:20040
23: ANU 15 : 256MHz | 2.161G / 2.054Gh/s WU: 28.2/m A: 70048 R: 192 HW: 1298
24: ANU 16 : 256MHz | 4.147G / 2.054Gh/s WU: 28.2/m A: 69664 R: 256 HW: 1216
31: BXM 13 : | 3.994G / 3.995Gh/s WU: 56.0/m A: 64608 R: 736 HW: 0
32: BXM 14 : | 4.597G / 4.572Gh/s WU: 64.1/m A: 73696 R: 128 HW: 0
33: BXM 15 : | 4.200G / 4.185Gh/s WU: 58.6/m A: 66400 R: 512 HW: 0
November 17, 2016, 04:01:37 AM
usb antminer u1 x10 code anu
drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
It's probably because you're using so many different varied devices. If the memory plateaus and stops rising then that's to be expected. If it keeps rising every day then that's unexpected and inappropriate. If that happens, remove one type of device at a time and see which one was responsible for the memory rising. Most likely there's nothing wrong, it's just cached ram usage.drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
as a comparison:
top - 09:56:47 up 6 days, 12:50, 1 user, load average: 1,22, 1,38, 1,40
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
%Cpu(s): 2,3 us, 5,0 sy, 89,7 ni, 0,0 id, 0,0 wa, 0,0 hi, 3,0 si, 0,0 st
KiB Mem: 2061804 total, 1815528 used, 246276 free, 124532 buffers
KiB Swap: 2094076 total, 18584 used, 2075492 free. 889948 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2080 root 10 -10 341280 33580 6640 S 1,3 1,6 122:14.47 cgminer
here's my memory usage on ubuntu 16 with
about 14 Antminer U2, 4 U2
===edit===
that's what I'm running
SHA256 algorithm
14.40 GH/s hashrate avg
0 blocks found
2261676 (99.75%) accepted
5688 (0.25%) rejected
0 (0%) stale
7213 (0.317%) hw errors
200.53/m work utility
10209639 best share
de.ckpool.org:3333 active pool
dev # temperature hashrate 5s accepted rejected utility hw errors
NF1 0 0°C / 32°F 2.04 GH/s 317652 (99.42%) 1848 (0.58%) 2.34/m 0 (0%)
ANU 1 0°C / 32°F 1.81 GH/s 314244 (99.72%) 876 (0.28%) 2.31/m 2 (0.001%)
ANU 2 0°C / 32°F 2.05 GH/s 317448 (99.74%) 840 (0.26%) 2.34/m 0 (0%)
AMU 3 0°C / 32°F 335.81 MH/s 51840 (99.93%) 36 (0.07%) 0.38/m 477 (0.904%)
AMU 4 0°C / 32°F 335.72 MH/s 52428 (99.93%) 36 (0.07%) 0.39/m 507 (0.957%)
ANU 5 0°C / 32°F 2.70 GH/s 314292 (99.72%) 876 (0.28%) 2.31/m 1 (0%)
AMU 6 0°C / 32°F 335.87 MH/s 52968 (99.89%) 60 (0.11%) 0.39/m 553 (1.043%)
AMU 7 0°C / 32°F 335.60 MH/s 54288 (99.96%) 24 (0.04%) 0.4/m 537 (1.006%)
AMU 8 0°C / 32°F 335.59 MH/s 52440 (99.95%) 24 (0.05%) 0.39/m 523 (0.983%)
AMU 9 0°C / 32°F 335.68 MH/s 52200 (99.95%) 24 (0.05%) 0.38/m 627 (1.192%)
AMU 10 0°C / 32°F 335.87 MH/s 51168 (99.88%) 60 (0.12%) 0.38/m 534 (1.014%)
AMU 11 0°C / 32°F 335.18 MH/s 52464 (99.89%) 60 (0.11%) 0.39/m 603 (1.131%)
AMU 12 0°C / 32°F 335.46 MH/s 52548 (99.98%) 12 (0.02%) 0.39/m 619 (1.171%)
AMU 13 0°C / 32°F 335.31 MH/s 53232 (99.93%) 36 (0.07%) 0.39/m 547 (1.031%)
AMU 14 0°C / 32°F 335.59 MH/s 53040 (99.98%) 12 (0.02%) 0.39/m 583 (1.097%)
AMU 15 0°C / 32°F 335.58 MH/s 52164 (99.95%) 24 (0.05%) 0.38/m 573 (1.081%)
AMU 16 0°C / 32°F 335.26 MH/s 52476 (99.98%) 12 (0.02%) 0.39/m 525 (0.989%)
ANU 17 0°C / 32°F 2.21 GH/s 314784 (99.74%) 828 (0.26%) 2.32/m 2 (0.001%)
November 15, 2016, 02:48:47 PM
usb antminer u1 x10 code anu
drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
It's probably because you're using so many different varied devices. If the memory plateaus and stops rising then that's to be expected. If it keeps rising every day then that's unexpected and inappropriate. If that happens, remove one type of device at a time and see which one was responsible for the memory rising. Most likely there's nothing wrong, it's just cached ram usage. drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
November 15, 2016, 07:06:49 AM
usb antminer u1 x10 code anu
drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
drilbit 1.5ghs x2 code drb
bitfury 5.5ghs x6 code bxm
others i cant remember but have code AMU x1 ,code BXM and code BX1 and some AU3
current average hash speed 55.37ghs
November 15, 2016, 06:47:13 AM
good afternoon everybody
I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
What driver are you using? There are no known memory leaks as such.I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
WinUSB (v6.1.7600.16385)
from zadig 2.1.2
it is now at 430.7 meg
also how do you post pics for here?
November 15, 2016, 06:09:31 AM
good afternoon everybody
I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
What driver are you using? There are no known memory leaks as such.I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
WinUSB (v6.1.7600.16385)
from zadig 2.1.2
it is now at 430.7 meg
also how do you post pics for here?
November 15, 2016, 03:46:09 AM
good afternoon everybody
I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
What driver are you using? There are no known memory leaks as such. I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
November 15, 2016, 03:18:56 AM
good afternoon everybody
I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
here is my command batch file text
ive blanked out my server and password for my protection
also, is there any way for having it stop and restard in the batch .bat file every 5 hours?
@echo off
cd c:\
cd cgminer
cgminer -o stratum+tcp://xxxxxxxx:3333 -u xxxxxxxx -p x
Thanks in advance
ososober
I have a concern about cgminer ver 4.9.2
i run it, and after a day or so it shows as using over 1000 meg or ram memory
currently it has been running 9 hours and taskmaster is showing 285.6 meg of memory used
is this normal or
here is my command batch file text
ive blanked out my server and password for my protection
also, is there any way for having it stop and restard in the batch .bat file every 5 hours?
@echo off
cd c:\
cd cgminer
cgminer -o stratum+tcp://xxxxxxxx:3333 -u xxxxxxxx -p x
Thanks in advance
ososober
October 19, 2016, 04:58:19 PM
Hello CGMiner!!!
I have mining "AntMiner U3"
I download and going mining on site very good and income bitcoin normal.
Now problem, what's error and problem. Maybe virus or not or others.
I download zadig and driver install good. But not receive, I don't know what's problem. How to fix error?
I have mining "AntMiner U3"
I download and going mining on site very good and income bitcoin normal.
Now problem, what's error and problem. Maybe virus or not or others.
I download zadig and driver install good. But not receive, I don't know what's problem. How to fix error?
I don't know anything about a U3, but, it looks like the WinUSB driver isn't assigned to it. So with the device plugged into your USB port rerun Zadig and verify that WinUSB is assigned to it. If not reselect/reinstall WinUSB.
October 19, 2016, 02:33:31 PM
The best way to fix any problem with the U3 is to throw it in the trash; that's where they belong.
October 19, 2016, 01:05:18 PM
Hello CGMiner!!!
I have mining "AntMiner U3"
I download and going mining on site very good and income bitcoin normal.
Now problem, what's error and problem. Maybe virus or not or others.
I download zadig and driver install good. But not receive, I don't know what's problem. How to fix error.
See Text document "logfile.txt" below.
Thanks, wait answer
Andrey
to see text document "logfile" error
http://i83.fastpic.ru/big/2016/1019/8f/53d19c807a406d5a5a2ced415ccb9d8f.jpg
.
http://i84.fastpic.ru/big/2016/1019/85/e780a7feffac817d873999f925d38685.jpg
.
I have mining "AntMiner U3"
I download and going mining on site very good and income bitcoin normal.
Now problem, what's error and problem. Maybe virus or not or others.
I download zadig and driver install good. But not receive, I don't know what's problem. How to fix error.
See Text document "logfile.txt" below.
Thanks, wait answer
Andrey
to see text document "logfile" error
Code:
[2016-10-18 08:32:52] Started cgminer 4.9.2
[2016-10-18 08:32:52] Loaded configuration file cgminer.conf
[2016-10-18 08:32:52] Fatal JSON error in configuration file.
[2016-10-18 08:32:52] Configuration file could not be used.
[2016-10-18 08:32:56] USB init, open device failed, err -12,
[2016-10-18 08:32:56] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:32:56] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:32:56] See README.txt file included for help
[2016-10-18 08:32:56] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:32:56] USB init, open device failed, err -12,
[2016-10-18 08:32:56] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:32:56] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:32:56] See README.txt file included for help
[2016-10-18 08:32:56] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:32:57] No devices detected!
[2016-10-18 08:32:57] Waiting for USB hotplug devices or press q to quit
[2016-10-18 08:32:57] Probing for an alive pool
[2016-10-18 08:32:57] Pool 0 difficulty changed to 1024
[2016-10-18 08:32:58] Network diff set to 259G
[2016-10-18 08:33:06] USB init, open device failed, err -12,
[2016-10-18 08:33:06] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:06] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:06] See README.txt file included for help
[2016-10-18 08:33:06] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:06] USB init, open device failed, err -12,
[2016-10-18 08:33:06] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:06] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:06] See README.txt file included for help
[2016-10-18 08:33:06] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:15] USB init, open device failed, err -12,
[2016-10-18 08:33:15] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:15] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:15] See README.txt file included for help
[2016-10-18 08:33:15] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:16] USB init, open device failed, err -12,
[2016-10-18 08:33:16] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:16] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:16] See README.txt file included for help
[2016-10-18 08:33:16] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:25] USB init, open device failed, err -12,
[2016-10-18 08:33:25] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:25] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:25] See README.txt file included for help
[2016-10-18 08:33:25] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:25] USB init, open device failed, err -12,
[2016-10-18 08:33:25] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:25] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:25] See README.txt file included for help
[2016-10-18 08:33:25] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:34] USB init, open device failed, err -12,
[2016-10-18 08:33:34] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:34] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:34] See README.txt file included for help
[2016-10-18 08:33:34] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:34] USB init, open device failed, err -12,
[2016-10-18 08:33:34] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:34] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:34] See README.txt file included for help
[2016-10-18 08:33:34] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:32:52] Loaded configuration file cgminer.conf
[2016-10-18 08:32:52] Fatal JSON error in configuration file.
[2016-10-18 08:32:52] Configuration file could not be used.
[2016-10-18 08:32:56] USB init, open device failed, err -12,
[2016-10-18 08:32:56] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:32:56] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:32:56] See README.txt file included for help
[2016-10-18 08:32:56] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:32:56] USB init, open device failed, err -12,
[2016-10-18 08:32:56] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:32:56] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:32:56] See README.txt file included for help
[2016-10-18 08:32:56] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:32:57] No devices detected!
[2016-10-18 08:32:57] Waiting for USB hotplug devices or press q to quit
[2016-10-18 08:32:57] Probing for an alive pool
[2016-10-18 08:32:57] Pool 0 difficulty changed to 1024
[2016-10-18 08:32:58] Network diff set to 259G
[2016-10-18 08:33:06] USB init, open device failed, err -12,
[2016-10-18 08:33:06] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:06] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:06] See README.txt file included for help
[2016-10-18 08:33:06] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:06] USB init, open device failed, err -12,
[2016-10-18 08:33:06] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:06] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:06] See README.txt file included for help
[2016-10-18 08:33:06] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:15] USB init, open device failed, err -12,
[2016-10-18 08:33:15] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:15] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:15] See README.txt file included for help
[2016-10-18 08:33:15] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:16] USB init, open device failed, err -12,
[2016-10-18 08:33:16] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:16] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:16] See README.txt file included for help
[2016-10-18 08:33:16] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:25] USB init, open device failed, err -12,
[2016-10-18 08:33:25] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:25] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:25] See README.txt file included for help
[2016-10-18 08:33:25] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:25] USB init, open device failed, err -12,
[2016-10-18 08:33:25] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:25] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:25] See README.txt file included for help
[2016-10-18 08:33:25] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:34] USB init, open device failed, err -12,
[2016-10-18 08:33:34] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:34] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:34] See README.txt file included for help
[2016-10-18 08:33:34] Icarus detect (2:4) failed to initialise (incorrect device?)
[2016-10-18 08:33:34] USB init, open device failed, err -12,
[2016-10-18 08:33:34] You need to install a WinUSB driver for - AMU device 2:4
[2016-10-18 08:33:34] And associate - AMU device 2:4 with WinUSB using zadig
[2016-10-18 08:33:34] See README.txt file included for help
[2016-10-18 08:33:34] Icarus detect (2:4) failed to initialise (incorrect device?)
http://i83.fastpic.ru/big/2016/1019/8f/53d19c807a406d5a5a2ced415ccb9d8f.jpg
.
http://i84.fastpic.ru/big/2016/1019/85/e780a7feffac817d873999f925d38685.jpg
.
October 07, 2016, 07:28:05 PM
What should I do when I get this error?
Using an Avalon Nano miner.
Probably an incorrect libusb version rather than the libusb code we provide ...Code:
[2016-09-28 14:04:13.329] Started cgminer 4.9.2
[2016-09-28 14:03:12.815] ICA 0 usb transfer err:(-9) LIBUSB_ERROR_PIPE
[2016-09-28 14:03:12.815] FAIL: USB get_lock not found (2:63)
[2016-09-28 14:03:12.815] ICA 0 usb transfer err:(-9) LIBUSB_ERROR_PIPE
[2016-09-28 14:03:12.815] FAIL: USB get_lock not found (2:63)
Using an Avalon Nano miner.
Or an OS that doesn't support the USB locking we use ... or ... ?
September 28, 2016, 12:04:50 PM
What should I do when I get this error?
Using an Avalon Nano miner.
Code:
[2016-09-28 14:04:13.329] Started cgminer 4.9.2
[2016-09-28 14:03:12.815] ICA 0 usb transfer err:(-9) LIBUSB_ERROR_PIPE
[2016-09-28 14:03:12.815] FAIL: USB get_lock not found (2:63)
[2016-09-28 14:03:12.815] ICA 0 usb transfer err:(-9) LIBUSB_ERROR_PIPE
[2016-09-28 14:03:12.815] FAIL: USB get_lock not found (2:63)
Using an Avalon Nano miner.
September 24, 2016, 07:02:41 PM
Anyone know how to send the API command to change miner frequency?
I'm trying sending the command "setconfig" with params like this "bitmain-freq,400", but it sends me an error config not found.
That depends on the mining device and if there is implemented code to do that.I'm trying sending the command "setconfig" with params like this "bitmain-freq,400", but it sends me an error config not found.
If it's someone else's driver they added to a fork of cgminer, I'd doubt it's been implemented.
Jump to: