Well, I post, this simple crash error, GPU: GV-R577SO-1GD
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/q71/s720x720/943528_10201350352303715_488119254_n.jpg
Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 285. (Read 5805537 times)
June 28, 2013, 03:15:54 PM
June 28, 2013, 03:01:08 PM
in faq: https://eclipsemc.com/faq.php what I see can use one address.
Other kernel, give crash. except diakgcn kernel.
I test on phoenix, the BFL_INT cause error.
this CGMiner can disable BFL_INT?
Update: Phoenix can run without BFL_INT, I getting piss off with Overclock version GPU's.
Other kernel, give crash. except diakgcn kernel.
I test on phoenix, the BFL_INT cause error.
this CGMiner can disable BFL_INT?
Update: Phoenix can run without BFL_INT, I getting piss off with Overclock version GPU's.
What about running stock, no changing the intensity, vectors, or worksize and not declaring a kernel and letting CGMiner decide the best kernel? Just input your pool, user, and pass info and see if you can connect and mine. If you cant do that, then I dont know if its something with CGMiner or not as you should be able to mine SOMETHING with just stock settings.
June 28, 2013, 02:18:49 PM
in faq: https://eclipsemc.com/faq.php what I see can use one address.
Other kernel, give crash. except diakgcn kernel.
I test on phoenix, the BFL_INT cause error.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/1010454_10201350089017133_1485853823_n.jpg
this CGMiner can disable BFL_INT?
Update: Phoenix can run without BFL_INT, I getting piss off with Overclock version GPU's.
Other kernel, give crash. except diakgcn kernel.
I test on phoenix, the BFL_INT cause error.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/q71/s720x720/1010454_10201350089017133_1485853823_n.jpg
this CGMiner can disable BFL_INT?
Update: Phoenix can run without BFL_INT, I getting piss off with Overclock version GPU's.
June 28, 2013, 01:55:01 PM
A quick check shows that us. and us1. both resolve to the same IP = 67.14.164.114
His miner shows as being connected. His share count shows 0 accepted and 14 HW errors.
Not sure what the -k is for, I GPU mine and never use it. Alternate kernel? How about we get the primary kernel working first? The worksize seems large, too. I suggest that you drop everything off your command line except the -u and -p and see what happens.
There is a possibility that you've generated a bad cgminer.conf file. Delete it before you start again. f you quit using 'Q' a summary should print out that might show you something useful, too.
You don't really need to blank out your user name, unless you're afraid that someone is going to mine using it and give you free Bitcoins
His miner shows as being connected. His share count shows 0 accepted and 14 HW errors.
Not sure what the -k is for, I GPU mine and never use it. Alternate kernel? How about we get the primary kernel working first? The worksize seems large, too. I suggest that you drop everything off your command line except the -u and -p and see what happens.
There is a possibility that you've generated a bad cgminer.conf file. Delete it before you start again. f you quit using 'Q' a summary should print out that might show you something useful, too.
You don't really need to blank out your user name, unless you're afraid that someone is going to mine using it and give you free Bitcoins
June 28, 2013, 01:30:14 PM
both GPU, run OpenCL benchmark, no problem.
Latest test:
I read Diablo Readme for GPU vector size, and diablo return opencl worksize 256, and apply it here.
I try use other kernel, seem mining no respond at all, like null?
this one on Catalyst 13.4, OpenCL 1.2
Latest test:
I read Diablo Readme for GPU vector size, and diablo return opencl worksize 256, and apply it here.
I try use other kernel, seem mining no respond at all, like null?
this one on Catalyst 13.4, OpenCL 1.2
Um......I think your pool address is wrong. eclipsemc has three severs, you denote each one by putting either "us1", "us2", or "us3" in the address. You only have "us"."
June 28, 2013, 01:00:23 PM
Hello,
In CGminer 3.1.1, is the ASIC/FPGA automatically detected in linux? I compiled it with support for all FPGA's and ASIC's.
In CGminer 3.1.1, is the ASIC/FPGA automatically detected in linux? I compiled it with support for all FPGA's and ASIC's.
June 28, 2013, 12:02:50 PM
both GPU, run OpenCL benchmark, no problem.
Latest test:
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q71/s720x720/945617_10201349366279065_1741007079_n.jpg
I read Diablo Readme for GPU vector size, and diablo return opencl worksize 256, and apply it here.
I try use other kernel, seem mining no respond at all, like null?
this one on Catalyst 13.4, OpenCL 1.2
Latest test:
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-ash3/q71/s720x720/945617_10201349366279065_1741007079_n.jpg
I read Diablo Readme for GPU vector size, and diablo return opencl worksize 256, and apply it here.
I try use other kernel, seem mining no respond at all, like null?
this one on Catalyst 13.4, OpenCL 1.2
June 28, 2013, 11:25:27 AM
Zanatos666 ask report here, 
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have used a 5770 with no issue. And others are using 5770's and 6870's with no issues. I would recommend reading the readme and pay special attention to the Q & A on the catalyst and SDK versions to verify that you have the correct versions for mining.
This is a helpful link, I think
https://en.bitcoin.it/wiki/Mining_hardware_comparison
Sam
What versions of Catalyst and OpenCL SDK?
What coin are you trying to mine?
Can you capture the error's and post them?
Do the GPU's work with games or 3d rendering test's such as those with GPU Caps viewer?
June 28, 2013, 11:21:06 AM
Zanatos666 ask report here,
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have used a 5770 with no issue. And others are using 5770's and 6870's with no issues. I would recommend reading the readme and pay special attention to the Q & A on the catalyst and SDK versions to verify that you have the correct versions for mining.
This is a helpful link, I think
https://en.bitcoin.it/wiki/Mining_hardware_comparison
Sam
June 28, 2013, 10:10:57 AM
Zanatos666 ask report here,
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have used a 5770 with no issue. And others are using 5770's and 6870's with no issues. I would recommend reading the readme and pay special attention to the Q & A on the catalyst and SDK versions to verify that you have the correct versions for mining.
This is a helpful link, I think
https://en.bitcoin.it/wiki/Mining_hardware_comparison
Sam
June 28, 2013, 10:04:46 AM
...
I think you clicked on the wrong one ... the one in RPi_32 says 3.1.1 when I download it and run it (and did also when I put it there
)
Or did you not run the one you downloaded?
The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
I think you clicked on the wrong one ... the one in RPi_32 says 3.1.1 when I download it and run it (and did also when I put it there
)Or did you not run the one you downloaded?
The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
I wasn't attempting to "one-up" you Kano, just trying to help point the guy to the specific place where his problem lay and show him how I figured it out. I hoped that the info in my post might help others, too, along the way.
June 28, 2013, 09:33:54 AM
Zanatos666 ask report here,
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
I have 2 GPU with different desktop platform.
Radeon HD6870 GV-R685OC-1GD
Radeon HD5770 GV-R577SO-1GD
Both GPU are GIGABYTE Super Overclock Series
Both GPU can't use for mining,
CGMinier give crash during starting application, same with poclbm. These GPU unsupported?
June 28, 2013, 12:49:51 AM
...
I think you clicked on the wrong one ... the one in RPi_32 says 3.1.1 when I download it and run it (and did also when I put it there)
Or did you not run the one you downloaded?
The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
I think you clicked on the wrong one ... the one in RPi_32 says 3.1.1 when I download it and run it (and did also when I put it there
)Or did you not run the one you downloaded?
The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
June 28, 2013, 12:29:33 AM
thanks -Redacted-!! that "which" command did it.
there was an old installation (make install it seems) that was screwing things up.
deleted the bin in the usr folder and voila... 3.1.1 <3
there was an old installation (make install it seems) that was screwing things up.
deleted the bin in the usr folder and voila... 3.1.1 <3
June 27, 2013, 08:56:01 PM
Try changing to that 3.1.1 directory and executing ./cgminer just to make sure you're picking up the local copy. Since the wget command you gave to obtain the binary is wrong, I think your cgminer command ends up executing something else found elsewhere. You can execute the command which cgminer to find out where the cgminer command being run lives. I'm betting you have a version 3.2.x installed to a directory somewhere in your search path.
The wget command you gave retrieves a 24k web-page, not a binary:
To obtain the cgminer binary, use this path with "raw" in it rather than "blob". Notice that the binary is 915k:
pi@raspberrypi ~ $ mv cgminer-3.1.1a cgminer
pi@raspberrypi ~ $ chmod a+x cgminer
pi@raspberrypi ~ $ ./cgminer -h
cgminer 3.1.1a
Built with bflsc bitforce icarus modminer ztex mining support.
Usage: ./cgminer [-DdElmpPQqSsTouOchnV]
Options for both config file and command line:
....
The wget command you gave retrieves a 24k web-page, not a binary:
Code:
wget https://github.com/kanoi/cgminer-binaries/blob/master/RPi_32/cgminer-3.1.1a
...
Length: 24364 (24K) [text/html]
Saving to: `cgminer-3.1.1a'
100%[============================================================>] 24,364 --.-K/s in 0.01s
2013-06-27 20:22:29 (2.38 MB/s) - `cgminer-3.1.1a' saved [24364/24364]
To obtain the cgminer binary, use this path with "raw" in it rather than "blob". Notice that the binary is 915k:
Code:
rm cgminer.3.1.1*
wget https://github.com/kanoi/cgminer-binaries/raw/master/RPi_32/cgminer-3.1.1a
...
Length: 936480 (915K) [text/plain]
Saving to: `cgminer-3.1.1a'
100%[============================================================>] 936,480 140K/s in 6.5s
2013-06-27 20:04:48 (140 KB/s) - `cgminer-3.1.1a' saved [936480/936480]
pi@raspberrypi ~ $ mv cgminer-3.1.1a cgminer
pi@raspberrypi ~ $ chmod a+x cgminer
pi@raspberrypi ~ $ ./cgminer -h
cgminer 3.1.1a
Built with bflsc bitforce icarus modminer ztex mining support.
Usage: ./cgminer [-DdElmpPQqSsTouOchnV]
Options for both config file and command line:
....
June 27, 2013, 08:41:35 PM
hmmm redownloaded both from kolivas and yours.
wget http://ck.kolivas.org/apps/cgminer/3.1/cgminer-3.1.1.tar.bz2
tar -jxvf cgminer-3.1.1.tar.bz2
pi@raspberrypi ~ $ cd cgminer-3.1.1/
pi@raspberrypi ~/cgminer-3.1.1 $ CFLAGS="-O2 -Wall" ./configure --disable-opencl --disable-adl --enable-bflsc --enable-bitforce --enable-icarus --enable-avalon
make
still says 3.2.1
then
wget https://github.com/kanoi/cgminer-binaries/blob/master/RPi_32/cgminer-3.1.1a
mv cgminer cgminer.old
mv cgminer-3.1.1a cgminer
chmod +x cgminer
still says 3.2.1
wget http://ck.kolivas.org/apps/cgminer/3.1/cgminer-3.1.1.tar.bz2
tar -jxvf cgminer-3.1.1.tar.bz2
pi@raspberrypi ~ $ cd cgminer-3.1.1/
pi@raspberrypi ~/cgminer-3.1.1 $ CFLAGS="-O2 -Wall" ./configure --disable-opencl --disable-adl --enable-bflsc --enable-bitforce --enable-icarus --enable-avalon
make
still says 3.2.1
then
wget https://github.com/kanoi/cgminer-binaries/blob/master/RPi_32/cgminer-3.1.1a
mv cgminer cgminer.old
mv cgminer-3.1.1a cgminer
chmod +x cgminer
still says 3.2.1
June 27, 2013, 08:22:59 PM
where can i get sources to build version 3.1? i need it to run my CM1 on my rPi
http://ck.kolivas.org/apps/cgminer ?
Yes source is there ... under the folder ... ... ... ... 3.1 http://ck.kolivas.org/apps/cgminer ?
RPi 3.1 binaries are here:
https://github.com/kanoi/cgminer-binaries/tree/master/RPi_32
thanks! but the source and the binary both say its 3.2.1 and not 3.1 :S is that ok?
)Or did you not run the one you downloaded?
The official source 3.1.1 also says 3 1 1 in configure.ac ... so you clicked on something wrong ... (or ran a different version to what you downloaded)
June 27, 2013, 08:12:49 PM
where can i get sources to build version 3.1? i need it to run my CM1 on my rPi
http://ck.kolivas.org/apps/cgminer ?
Yes source is there ... under the folder ... ... ... ... 3.1 http://ck.kolivas.org/apps/cgminer ?
RPi 3.1 binaries are here:
https://github.com/kanoi/cgminer-binaries/tree/master/RPi_32
thanks! but the source and the binary both say its 3.2.1 and not 3.1 :S is that ok?
June 27, 2013, 06:01:53 PM
This is one of the best guides I've seen for doing a 3.1.1. install on Windows:
http://rdmsnippets.com/tag/install-block-erupter-on-windows-7/
http://rdmsnippets.com/tag/install-block-erupter-on-windows-7/
June 27, 2013, 05:08:45 PM
Just compiled cgminer 3.3.1 for my pi.
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
The Blockerupters rerecognised and its mining (sort of).... Is the green light supposed to stay off while mining (on = idle). All my 10 BE mine for a second and then the green LED is on again?
it should blink on occasionly, but be mostly off
hm .... something is wrong then. Could that be because they are not getting enough work from eclipsemc.com?
Must be that they do not get enough juice from the Hub .... i can not get more than one working :/
I tried them on Win7 and i cant even get cgminer working ....
CGminer on Win7 just won't accept any pool i give to it?
It just freezes or quits on me. I cant even get to the main screen after entering a pool.
Does anyone have a beginners Tutorial at hand that describes step by step what to do?
I have this one:
https://bitcointalksearch.org/topic/how-to-use-asicminer-block-erupters-with-cgminer-on-windows-7-220450
Seems to help a lot of people.
M
Jump to: