Author

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 530. (Read 5805728 times)

hero member
Activity: 626
Merit: 500
Mining since May 2011.
How do i know the COM port of Single ?
which the order they in console?

In windows, look in device manager under ports.
In linux, ls /dev/ttyUSB*

order in console corresponds to order in device manager
?

I don't know if there is some way to find that info from cgminer like in a log or debug, but I have a rig with (3) BFL on Windows, COM7, 8, 9 that shows as BFL 0, 1, 2 in cgminer. If I pull the plug on COM8 it is killing BFL 1. So it looks like it is putting them in order from lowest to highest.
legendary
Activity: 2674
Merit: 1083
Legendary Escrow Service - Tip Jar in Profile
Finally i got cgminer running for mining litecoins. But unfortunately the hashing rate is very low. Its the same with reaper. Its only 0.6KH/s and its using more than 50% of my cpu too. While when i mine litecoins with my cpu i get 7kh/s. So its a bit disappointing. Its 9600M GT and i thought it will be faster than a cpu at least. But this way gpu wouldnt be a danger to cpu-mining litecoins.

Maybe i should mine bitcoins with the gpu. Starting cgminer without --scrypt shows hashrates of 7MH/s, which is 1000 times more than for litecoins. I now tested soloming bitcoins and the hashrate there is around 7MH/s. Or should i mine namecoins, solidcoins or similar? I mean cgminer still eats 40% of cpu when mining.

So whats best here? And i know its not worth much anyway. But i have free power for my notebook a good chunk of hours the week and i would like to play some kind of lotto this way...
legendary
Activity: 1286
Merit: 1004
How do i know the COM port of Single ?
which the order they in console?

In windows, look in device manager under ports.
In linux, ls /dev/ttyUSB*

order in console corresponds to order in device manager
?
hero member
Activity: 626
Merit: 500
Mining since May 2011.
How do i know the COM port of Single ?
which the order they in console?

In windows, look in device manager under ports.
In linux, ls /dev/ttyUSB*
sr. member
Activity: 344
Merit: 250
Thanks.  I just compiled the latest 2.6.1-9 and I'll try to let that run for now.

Running 2.6.1-9 with two BFL singles (on windows), I'm starting to see similar errors again, though it seems to be recovering from them and continuing to mine (so far).

Code:
 cgminer version 2.6.1 - Started: [2012-08-01 18:59:34]
--------------------------------------------------------------------------------
 (5s):1118.8 (avg):1610.3 Mh/s | Q:2654  A:37137  R:222  HW:0  E:1399%  U:22.5/m
 TQ: 4  ST: 3  SS: 0  DW: 225  NB: 176  LW: 36531  GF: 167  RF: 0
 Connected to http://us2.eclipsemc.com:8337 with LP as user ---
 Block: 0000029a265cb6f4de95ad514ffff5ce...  Started: [22:26:28]
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BFL 0:  56.0C         | 801.8/805.3Mh/s | A:18380 R:102 HW:0 U:11.12/m
 BFL 1:  58.7C         | 811.0/805.0Mh/s | A:18757 R:120 HW:0 U:11.35/m
--------------------------------------------------------------------------------

 [2012-08-02 22:31:09] Accepted a6d9ef5a.a0689418 BFL 0 pool 0
 [2012-08-02 22:31:09] Accepted 550ea98e.c4722914 BFL 0 pool 0
 [2012-08-02 22:31:14] Accepted a93cd55a.cc740012 BFL 1 pool 0
 [2012-08-02 22:31:14] Accepted f588f51a.6bd9e323 BFL 1 pool 0
 [2012-08-02 22:31:14] Accepted addf798b.83ce960d BFL 1 pool 0
 [2012-08-02 22:31:14] Accepted 21997880.88a6b1a2 BFL 1 pool 0
 [2012-08-02 22:31:15] Accepted fa8a18ae.18e8a4d2 BFL 0 pool 0
 [2012-08-02 22:31:19] Accepted d1953e6a.5d035983 BFL 1 pool 0
 [2012-08-02 22:31:19] Accepted a792631a.5a729013 BFL 0 pool 0
 [2012-08-02 22:31:19] Accepted 6daf242a.c049c950 BFL 0 pool 0
 [2012-08-02 22:31:28] BFL0: Error: Get temp returned empty string/timed out
 [2012-08-02 22:31:29] BFL0: Error: Get result reports: Temperature (celcius): 57.2
 [2012-08-02 22:31:30] BFL0: Error: Send block data reports: ERR:UNKNOWN!!!
 [2012-08-02 22:31:30] Accepted 1da3a134.20f44608 BFL 1 pool 0
 [2012-08-02 22:31:30] Accepted 7226c190.67b9192b BFL 1 pool 0
 [2012-08-02 22:31:35] BFL0: Comms error
 [2012-08-02 22:31:35] Accepted 6b9568f8.8eb2a7b9 BFL 1 pool 0
 [2012-08-02 22:31:46] Accepted 7be4aec0.bc8065b6 BFL 0 pool 0
 [2012-08-02 22:31:51] Accepted 4ff6fd1b.f74852a3 BFL 0 pool 0
 [2012-08-02 22:31:51] Accepted 660dc875.3881e901 BFL 1 pool 0
 [2012-08-02 22:31:51] Accepted a485e026.49f93713 BFL 1 pool 0
legendary
Activity: 1286
Merit: 1004
How do i know the COM port of Single ?
which the order they in console?
legendary
Activity: 1260
Merit: 1000
I've got cgminer 2.6.1.9 crash today, it just quit. So, I'm back to 2.5.0 for now  Sad. On the other hand, 2.5.0 is giving me U around 6 more, which is ~0.8% of my total hash rate.
I hereby declare 2.6.x a BFL disaster area.

Can we get some government funds to clean up the area?  Just as long as FEMA isn't managing it...
legendary
Activity: 1286
Merit: 1004
some error with one single

Code:
[2012-08-02 08:52:06] BFL7: Error: Send block data reports: ERR:UNKNOWN!!!
[2012-08-02 08:52:11] BFL7: Error: Send block data reports: Temperature (celcius):
[2012-08-02 08:52:16] BFL7: Error: Send block data reports: ERR:UNKNOWN!!!
2012-08-02 08:52:59] BFL7: Error: Get result reports: ERR:UNKNOWN!!!
2012-08-02 08:52:59] BFL7: Error: Send work reports: ERR:INVALID DATA, i_read = 3
2012-08-02 08:53:04] BFL7: Error: Send block data reports: ERR:UNKNOWN!!!
2012-08-02 08:53:09] BFL7: Error: Send block data reports: Temperature (celcius): 42.

update
this is throttle.
update firmware to lower rate has resolved issue
legendary
Activity: 1286
Merit: 1004
cgminer dont work with BFL singles count > 13
crash
windows 7 64

-T work
2.5.0 crash

SOLVED
need increase size of screen buffer
Code:
mode con:cols=100 lines=2500 
actually size limited desktop size

Code:
cd C:\Users\miner\Downloads\cgminer-2.6.1-win32
mode con:cols=100 lines=2500
cgminer -G ^
-S "bitforce:\\.\COM3" ^
-S "bitforce:\\.\COM4" ^
-S "bitforce:\\.\COM5" ^
-S "bitforce:\\.\COM6" ^
-S "bitforce:\\.\COM7" ^
-S "bitforce:\\.\COM8" ^
-S "bitforce:\\.\COM9" ^
-S "bitforce:\\.\COM10" ^
-S "bitforce:\\.\COM11" ^
-S "bitforce:\\.\COM12" ^
-S "bitforce:\\.\COM13" ^
-S "bitforce:\\.\COM14" ^
-S "bitforce:\\.\COM15" ^
-S "bitforce:\\.\COM17" ^
-S "bitforce:\\.\COM19" ^
-S "bitforce:\\.\COM20" ^
-o http://pit.deepbit.net:8332 -u a -p a ^
-o http://api2.bitcoin.cz:8332 -u a           -p a ^
-o http://de.btcguild.com:8332 -u a           -p a ^
-o http://btcmine.com:8332     -u a           -p a
hero member
Activity: 686
Merit: 500
Having a small problem with cgminer with linux, first time using cgminer with linux so bear with me.

Code:
$ DISPLAY=:0 ./cgminer -n
 [2012-08-02 05:18:45] CL Platform 0 vendor: Advanced Micro Devices, Inc.
 [2012-08-02 05:18:45] CL Platform 0 name: AMD Accelerated Parallel Processing
 [2012-08-02 05:18:45] CL Platform 0 version: OpenCL 1.2 AMD-APP (923.1)
 [2012-08-02 05:18:45] Platform 0 devices: 1
 [2012-08-02 05:18:45] 0 Barts
 [2012-08-02 05:18:45] Failed to ADL_Adapter_ID_Get. Error -10
 [2012-08-02 05:18:45] Failed to ADL_Adapter_ID_Get. Error -10
 [2012-08-02 05:18:45] GPU 0 AMD Radeon HD 6800 Series  hardware monitoring enabled
 [2012-08-02 05:18:45] 1 GPU devices max detected

'Dat error. And my 5770 is missing, my 6850 is fine. I used DISPLAY=:0 just like the readme said but it still doesn't show up.

Code:
$ sudo aticonfig --list-ad

* 0. 01:00.0 AMD Radeon HD 6800 Series
  1. 02:00.0 ATI Radeon HD 5700 Series

* - Default adapter

Catalyst 12.6 and SDK 2.7
legendary
Activity: 1162
Merit: 1000
DiabloMiner author
cgminer dont work with BFL singles count > 13
crash
windows 7 64
BFGMiner should. If not, report a bug.

Angry neighborhood bastard mod here.

People keep reporting you. You have your own thread to evangelize your troll fork in, go do it in there; otherwise, fuck off.
420
hero member
Activity: 756
Merit: 500
Anyone know the best driver version and SDK for 5970's/CGMiner

either reply or PM

.05BTC for you (i'm poor)
My sig Smiley

Howabout for windows 7 64-bit?
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
I've got cgminer 2.6.1.9 crash today, it just quit. So, I'm back to 2.5.0 for now  Sad. On the other hand, 2.5.0 is giving me U around 6 more, which is ~0.8% of my total hash rate.
I hereby declare 2.6.x a BFL disaster area.
420
hero member
Activity: 756
Merit: 500
Anyone know the best driver version and SDK for 5970's/CGMiner

either reply or PM

.05BTC for you (i'm poor)
My sig Smiley

followed that but at step 10, the restart it goes to black screen.

Is it supposed to ask "Try" vs Install on each startup? after I click Try this time, shows loading icon as cursor, then 30sec or so, about to load and switches to black screen white text for half a second then goes black, display is ON but nothing is happening, here is the text in quotes:

"Welcome to Ubuntu 12.04 LTS (GNU/Linux 3.2.0-23-generic...
 * Documentation: https://help.ubuntu.com/

xubuntu@xubuntu:~$ "

I had to take a video to record what the screen said it flashes so quick
hero member
Activity: 628
Merit: 504
I've got cgminer 2.6.1.9 crash today, it just quit. So, I'm back to 2.5.0 for now  Sad. On the other hand, 2.5.0 is giving me U around 6 more, which is ~0.8% of my total hash rate.
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
cgminer dont work with BFL singles count > 13
crash
windows 7 64
BFGMiner should. If not, report a bug.
Fuck off
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
cgminer dont work with BFL singles count > 13
crash
windows 7 64

Yep, I can confirm this bug as well.
Yep good old pdcurses on windows... sigh. It will work in -T mode only with that many devices on windows.

EDIT: just to be sure - did it work with that many devices in 2.5.0?
legendary
Activity: 1260
Merit: 1000
cgminer dont work with BFL singles count > 13
crash
windows 7 64

Yep, I can confirm this bug as well.
legendary
Activity: 2576
Merit: 1186
cgminer dont work with BFL singles count > 13
crash
windows 7 64
BFGMiner should. If not, report a bug.
legendary
Activity: 1286
Merit: 1004
cgminer dont work with BFL singles count > 13
crash
windows 7 64
Jump to: