[Official] ROKOS [flavors] Crypto Full node OS |IoT Devices |Feedback/Discussion - page 2.

EnergyCoinDev

full member

Activity: 164

Merit: 100

The EnergyCoin and Energyparty Developer

Quote from: OKtoshi on September 28, 2017, 12:20:44 PM

Congratulations for new clients.

Thanks to ROKOS and OKCASH success we have a ton of work : )

We are working on the v9 of ROKOS and will be released in the coming weeks as soon as we can.

Hello OKtoshi,

If it will take weeks to work on V9, I'd suggest that you upgrade EnergyCoin Core to v1.6.0 for V8 first.

Your current old version v1.5.1 is basically not working since the fork.

Peter

OKtoshi

legendary

Activity: 1135

Merit: 1004

OK

Congratulations for new clients.

Thanks to ROKOS and OKCASH success we have a ton of work : )

We are working on the v9 of ROKOS and will be released in the coming weeks as soon as we can.

BogdanCo

hero member

Activity: 729

Merit: 513

Hi, how about the update of the Diamond v3 wallet on Raspberry PI? Please, please update:) Thanks a lot!

temp89

sr. member

Activity: 246

Merit: 250

What about new version of DMD wallet (3.0.0.13) in ROKOS v8? Hurry up, you're late Wink

.

There is also 50 DMD (≈$400) bounty for "a guide to compile DMDv3 on raspberri PI (ideal based on ROKOv8)".

crypto4jan

legendary

Activity: 2452

Merit: 1025

Energy coin master

Hi There,

EnergyCoin has now successful fork.
When comes v9 available?

Have a nice day,

Jan

benjioneniner

member

Activity: 62

Merit: 10

Hi, I've just installed ROKOS Flavors v8 on my Raspberry Pi 3 and I'm running it headless, as I don't have a HDMI monitor. I've accessed it remotely with Microsoft Remote Desktop on my Macbook and I would like to change the keyboard layout from the default US to German. However, I'm getting sudo: raspi-config: command not found. Does ROKOS use a different naming convention for raspi-config or is this a sign the installation has gone wrong? Thanks

cryptonit

legendary

Activity: 3038

Merit: 1053

bit.diamonds | uNiq.diamonds

maybe someone here wana earn that bounty

Quote from: cryptonit on August 21, 2017, 10:49:26 AM

Quote from: NoxX on August 21, 2017, 09:29:05 AM

Quote from: cryptonit on August 21, 2017, 03:58:49 AM

Quote from: temp89 on August 21, 2017, 01:43:15 AM

Quote from: cryptonit on August 20, 2017, 05:20:25 AM

there was a dmd diamond foundation decision to go public with testnet
so no invite needed everyone can join

more details about DMDv3 u find in the whitepaper
https://bit.diamonds/DMD_WP_1.0.pdf

timeplan:
now start to make testnet client and access public
08.09 last testnet update with release client
12.09 all exchanges should freeze deposit and withdraw user should do no more transactions
13.09 DMDv2 balance snapshot
15.09 launch of DMDv3 with first 7 days POS & masternode rewards reduced by 99%
so everyone have time set up his masternode and POS wallets without missing rewards

What about Rokos v8? Will there be new version of wallet on 15.09?

not at 15th
we will inform ROKOS team once final release is done
and they will compile a update for ROKOSv8

but basically u or any rokos owner can try compile on its own too
i had no time to spend time with my raspi and im sure i wont find soon

Perhaps it is worth having a bounty for this as well. I can imagine quite a few people will want to have DMD v3 on their RasPI (myself included), to be able to stake 24/7.

but would u trust a compiled wallet by someone?
i wouldnt easy i trust wallet compiled only from people i trust i trust the rokos team but last time we waited long for updatet wallet
u have to understand the guy who compile a wallet could modify the soruce code before he compile ist

so a bounty i can give but not for a compiled wallet but for a guide to compile a wallet

50 DMD bounty for a guide to compile DMDv3 on raspberri PI (ideal based on ROKOv8 )

crypto4jan

legendary

Activity: 2452

Merit: 1025

Energy coin master

Quote from: OKtoshi on August 10, 2017, 02:19:59 PM

Got it, thanks for sharing, getting updated for v9.
Already updated it over the website, very nice update and logo, grats to the team Wink

Thank you!

OKtoshi

legendary

Activity: 1135

Merit: 1004

OK

Quote from: crypto4jan on August 05, 2017, 04:46:49 AM

Quote from: EnergyCoinDev on August 04, 2017, 10:13:20 AM

Hello OKtoshi,

This is to inform you that the new EnergyCoin Core v1.6.0 has already been released. https://bitcointalksearch.org/topic/m.20567744

An issue is already opened here: https://github.com/BitcoinFullnode/ROKOS-OK-Bitcoin-Fullnode/issues/12

It's a Mandatory Update. Look forward if you can upgrade to v1.6.0 asap for ROKOS users.

Let me know if you have any question. Thank you.

Peter

Hi OKtoshi

We have also a now logo for EnergyCoin.
If posible can you also use the new logo?
A link to the logo: https://www.dropbox.com/s/vdafmx00hhmda98/EnergyCoin%28sphere%29.png?dl=0

Thank you,
Jan

edit I have the version with transparency: https://www.dropbox.com/s/vdafmx00hhmda98/EnergyCoin%28sphere%29.png?dl=0

Got it, thanks for sharing, getting updated for v9.
Already updated it over the website, very nice update and logo, grats to the team Wink

crypto4jan

legendary

Activity: 2452

Merit: 1025

Energy coin master

Quote from: EnergyCoinDev on August 04, 2017, 10:13:20 AM

Hello OKtoshi,

This is to inform you that the new EnergyCoin Core v1.6.0 has already been released. https://bitcointalksearch.org/topic/m.20567744

An issue is already opened here: https://github.com/BitcoinFullnode/ROKOS-OK-Bitcoin-Fullnode/issues/12

It's a Mandatory Update. Look forward if you can upgrade to v1.6.0 asap for ROKOS users.

Let me know if you have any question. Thank you.

Peter

Hi OKtoshi

We have also a now logo for EnergyCoin.
If posible can you also use the new logo?
A link to the logo: https://www.dropbox.com/s/vdafmx00hhmda98/EnergyCoin%28sphere%29.png?dl=0

Thank you,
Jan

edit I have the version with transparency: https://www.dropbox.com/s/vdafmx00hhmda98/EnergyCoin%28sphere%29.png?dl=0

EnergyCoinDev

full member

Activity: 164

Merit: 100

The EnergyCoin and Energyparty Developer

Hello OKtoshi,

This is to inform you that the new EnergyCoin Core v1.6.0 has already been released. https://bitcointalksearch.org/topic/m.20567744

An issue is already opened here: https://github.com/BitcoinFullnode/ROKOS-OK-Bitcoin-Fullnode/issues/12

It's a Mandatory Update. Look forward if you can upgrade to v1.6.0 asap for ROKOS users.

Let me know if you have any question. Thank you.

Peter

OKtoshi

legendary

Activity: 1135

Merit: 1004

OK

Quote from: Xircom on June 19, 2017, 06:39:15 AM

Hi,

Running both the PI and the Banana versions 0.14, but is wonderring if they are signalling BIP148/BIP91 or Sigwit ??

https://bitcoinmagazine.com/articles/bitcoin-core-0141-segwit-signalling-and-memory-accounting/

https://www.reddit.com/r/Bitcoin/comments/63s8qh/to_signal_uasf_on_your_node_add/

Xircom

legendary

Activity: 938

Merit: 1000

Hi,

Running both the PI and the Banana versions 0.14, but is wonderring if they are signalling BIP148/BIP91 or Sigwit ??

OKtoshi

legendary

Activity: 1135

Merit: 1004

OK

Quote from: cryptococcus on June 05, 2017, 02:45:08 PM

Quote from: OKtoshi on June 01, 2017, 05:49:06 PM

Quote from: Extrawelt on May 30, 2017, 10:35:01 AM

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

Probably got the image corrupted while download or while burning it to the microSD.

Please try again and make sure the checksum is correct to ensure it's not corrupted.

Feel free to join https://discord.io/bitcoin for support over the #ok-btc-rokos channel or
over the https://okcashtalk.org forums under ROKOS support section 👌

Yes the image file was corrupt. Now it worked fine...

However it looks very different fom v6. Is there a documentation for the initial setup (network, password, language settings, etc.)?

Initial setup: http://rokos-flavors.space/rokos_flavors.html

Rest of settings are pretty easy to change from options/settings/system menu.

cryptococcus

newbie

Activity: 46

Merit: 0

Quote from: OKtoshi on June 01, 2017, 05:49:06 PM

Quote from: Extrawelt on May 30, 2017, 10:35:01 AM

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

Probably got the image corrupted while download or while burning it to the microSD.

Please try again and make sure the checksum is correct to ensure it's not corrupted.

Feel free to join https://discord.io/bitcoin for support over the #ok-btc-rokos channel or
over the https://okcashtalk.org forums under ROKOS support section 👌

Yes the image file was corrupt. Now it worked fine...

However it looks very different fom v6. Is there a documentation for the initial setup (network, password, language settings, etc.)?

OKtoshi

legendary

Activity: 1135

Merit: 1004

OK

Quote from: Extrawelt on May 30, 2017, 10:35:01 AM

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

Probably got the image corrupted while download or while burning it to the microSD.

Please try again and make sure the checksum is correct to ensure it's not corrupted.

Feel free to join https://discord.io/bitcoin for support over the #ok-btc-rokos channel or
over the https://okcashtalk.org forums under ROKOS support section 👌

Extrawelt

member

Activity: 110

Merit: 10

Quote from: cryptococcus on May 30, 2017, 12:18:59 PM

Quote from: Extrawelt on May 30, 2017, 10:35:01 AM

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

I used the Win32DiskImager to install the .img on a 32 GB memory card. Actually I did it exactly the way as described on the Rokos page and how it worked before for v6...

First you have to format the sd card (with Formatter4.0), then install the image!
If you do not know how it goes look here: https://rokos-flavors.space/burn_sdcard.html

The image is running, I have just successfully installed on a raspberry pi 3!

cryptococcus

newbie

Activity: 46

Merit: 0

Quote from: Extrawelt on May 30, 2017, 10:35:01 AM

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

I used the Win32DiskImager to install the .img on a 32 GB memory card. Actually I did it exactly the way as described on the Rokos page and how it worked before for v6...

Extrawelt

member

Activity: 110

Merit: 10

Quote from: cryptococcus on May 30, 2017, 10:11:21 AM

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Yes V6 goes to the raspberry Pi 3!
V8 I'll test the day, I expect a new raspberry Pi 3!

How big is your memory card?
How do you install the image on the memory card?
Do you use software?

greetings
Robin

cryptococcus

newbie

Activity: 46

Merit: 0

Hi,

I was trying to install Rokos Flavor v8 (as I already did with v6), but it is not booting on my Pi3.
"...No working init found..." is last line when tryiing to boot.
Is there a different setup procedure of the SD card compared to v6? Others have successfully installed v8?

Greetz

Topic: [Official] ROKOS [flavors] Crypto Full node OS |IoT Devices |Feedback/Discussion - page 2. (Read 74683 times)