Topic: Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org - page 42. (Read 109911 times)
payout stuck ?
pools are not working. that the network is possible ....
Anyone knows "coinsforall.io" has been available?
What the setting for xpmclient?
the same portWhat the setting for xpmclient?
only change server
Anyone knows "coinsforall.io" has been available?
What the setting for xpmclient?
What the setting for xpmclient?
rx480 can not run graphics card driver 16.9.1 immediately crashes, 390 running at 15.12 normally, as you can start the 480?
win7 64bit http://saveimg.ru/pictures/05-01-17/7ff7c8ce7e06b0c7ac64385c7427297f.jpg
work fine. Your problem is on your side.
rx480 can not run graphics card driver 16.9.1 immediately crashes, 390 running at 15.12 normally, as you can start the 480?
Is it worth mining this coin for nvidia? 
Only if you have free electricity.
Is it worth mining this coin for nvidia?
@eXtremal
CoinsForAll - XPM
Payout is not working for XPM adress AXCz3i15iBg1Fksq8LrwqDB5Tdbd3tZodd
Can you fix it?
Thanks in advance.
Edit:
Payout started after 52 hours.
CoinsForAll - XPM
Payout is not working for XPM adress AXCz3i15iBg1Fksq8LrwqDB5Tdbd3tZodd
Can you fix it?
Thanks in advance.
Edit:
Payout started after 52 hours.
OpenCL error: -42 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
I use Rx470, but failed.
I use Rx470, but failed.
Hi eXtremal,
I know you are quite busy at coinsforall now - but can I ask you to check XPM address:
Ab94tfWX9yzYvJA6Zt7613jfCUaoVwcU8o
there are some 4+ XPM there - please make manual cash out!
Thanks
I know you are quite busy at coinsforall now - but can I ask you to check XPM address:
Ab94tfWX9yzYvJA6Zt7613jfCUaoVwcU8o
there are some 4+ XPM there - please make manual cash out!
Thanks
terminate called after throwing an instance of 'config4cpp::ConfigurationException'
Aborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
Where is your config.txt file? Must be in miner directoryAborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
If I move it, I get this :-)
ERROR: cannot open config.txt: No such file or directory
terminate called after throwing an instance of 'config4cpp::ConfigurationException'
Aborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
Where is your config.txt file? Must be in miner directoryAborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
Quote
what about 470 and 480
Tool slow Eratosthenes sieve compare to Hawaii GPUs
terminate called after throwing an instance of 'config4cpp::ConfigurationException'
Aborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
Aborted (core dumped)
server = "xpmforall.org";
port = "6666";
address = "AMgtSW8ge2mvqxaiWo11GqTKx6rQ2J57yA";
latest from git.
Quote
The benchmark error more or less immportant
Without this benchmark I can't say how much CPD can do Pascal GTX1070 & 1080 GPUs When I get access to one of these cards, I can fix benchmark and get some info.
Quote
The benchmark error more or less immportant
Without this benchmark I can't say how much CPD can do Pascal GTX1070 & 1080 GPUs When I get access to one of these cards, I can fix benchmark and get some info.
Quote from: How to initiate CUDA benchmark?
How to initiate CUDA benchmark?
Miner uses only OpenCL, not CUDA.Quote
*** sieve (check) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
Benchmark has some problems with Pascal cards, need to fix..OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
Yes fix is a needed thing for XPM and Pascal, some 25CPD on GTX 1070 would be best and disired fix
The benchmark error more or less immportant
Quote from: How to initiate CUDA benchmark?
How to initiate CUDA benchmark?
Miner uses only OpenCL, not CUDA.Quote
*** sieve (check) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
Benchmark has some problems with Pascal cards, need to fix.. OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
Looks like with new drivers CPD droped to 8.5 for 1070 @2000Mhz, driver 369.09
bench can only be done on 1560Mhz (card would not boost under -b)
GeForce GTX 1070; 15 compute units
square 320 bits: 35.046ms (3829.759M ops/sec)
square 320 bits: 35.033ms (3831.180M ops/sec)
multiply 320 bits: 54.552ms (2460.363M ops/sec)
square 352 bits: 42.029ms (3193.455M ops/sec)
multiply 352 bits: 67.761ms (1980.752M ops/sec)
Fermat tests 320 bits: 72.070ms (1.819M ops/sec)
Fermat tests 352 bits: 84.064ms (1.559M ops/sec)
*** hashmod benchmark ***
MHash per second: 734.856
Hash per iteration: 35.859 (0.000427 %)
Average hash multiplier size: 30.634
*** sieve (check) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
*** sieve (performance) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
How to initiate CUDA benchmark?
bench can only be done on 1560Mhz (card would not boost under -b)
GeForce GTX 1070; 15 compute units
square 320 bits: 35.046ms (3829.759M ops/sec)
square 320 bits: 35.033ms (3831.180M ops/sec)
multiply 320 bits: 54.552ms (2460.363M ops/sec)
square 352 bits: 42.029ms (3193.455M ops/sec)
multiply 352 bits: 67.761ms (1980.752M ops/sec)
Fermat tests 320 bits: 72.070ms (1.819M ops/sec)
Fermat tests 352 bits: 84.064ms (1.559M ops/sec)
*** hashmod benchmark ***
MHash per second: 734.856
Hash per iteration: 35.859 (0.000427 %)
Average hash multiplier size: 30.634
*** sieve (check) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
*** sieve (performance) benchmark ***
OpenCL error: -54 at /HDD/build/projects/xpmclient/xpmclient/benchmarks.cpp:836
How to initiate CUDA benchmark?
GTX 1070 2000Mhz
some 10.5 CPD, I tried different options but did not manage to get more from NV defaults...
Share benchmark results plz (run ./xpmclient -b).some 10.5 CPD, I tried different options but did not manage to get more from NV defaults...
Quote from: nenadubica
I am getting about 10cpd with 280x,but 270x is hashing at bellow 4, is it ok or rather low?
What 270X - R9 or R7 ? Jump to: