@miropp
Use display driver uninstaller : http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
Topic: Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD) - page 21. (Read 115964 times)
Ok, business as usual with linux. 
Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate?
Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate?GPU is connected to 16x PCIe slot with 1x riser? Try to connect to 1xPCIe slot. I had the same problem in ubuntu. Will try to install CentOS today.
BTW: on RX4xx cards with modded BIOS it is more profitable to mine ETH or ETH+SC than Zcash.
Finding the most profitable coin is like playing a lottery though. Right now whattomine says that a single RX 470 makes $1.06 from ETH, $1.00 from XMR and $1.00 from ZEC. Difficulty fluctuations change this order several times a day, so right now ETH is the best, but in a couple hours ZEC might get more profitable again. I'm leaning towards XMR actually, whattomine assumes RX 470 hashes at 660 h/s, but this page says it can do 770 h/s. If that's true, then XMR is the most profitable out of these 3 to mine right now ($1.18/24h).
Back on topic, is there any way to monitor GPU parameters in Linux? Temperature, fans speed, clocks, voltages? I tried googling, but only found similar questions and no answers - people ask how to do this stuff with amd-gpu pro and no one seems to know..
Please help - how to reinstall AMD Crimson driver to V16.3.2?
I need it for better hashrate on Fury cards.
Before I used V16.10.1
I run amdcleanup - everything OK, then restarted. V16.3.2 was downloaded from guru3d.
But when I run it, it stop on the Analysing system screen and nothing more.
Windows Defender disabled. Win 10 64bit
Restart does not help. Tried several times.
What shall i do now?
I need it for better hashrate on Fury cards.
Before I used V16.10.1
I run amdcleanup - everything OK, then restarted. V16.3.2 was downloaded from guru3d.
But when I run it, it stop on the Analysing system screen and nothing more.
Windows Defender disabled. Win 10 64bit
Restart does not help. Tried several times.
What shall i do now?
Ok, business as usual with linux. Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate?
Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate?GPU is connected to 16x PCIe slot with 1x riser? Try to connect to 1xPCIe slot. I had the same problem in ubuntu. Will try to install CentOS today.
BTW: on RX4xx cards with modded BIOS it is more profitable to mine ETH or ETH+SC than Zcash.
optiminer,
i have a problem using optiminer in ubuntu.
i got barely can mining.
i got this msg :
[*** LOG ERROR ***] [default] [argument index out of range] [2017-01-18 20:38:29]
ive tried to change the intensity from 6,5,4 to 3.
same result
how can i fix this?
i have a problem using optiminer in ubuntu.
i got barely can mining.
i got this msg :
[*** LOG ERROR ***] [default] [argument index out of range] [2017-01-18 20:38:29]
ive tried to change the intensity from 6,5,4 to 3.
same result
how can i fix this?
Any idea how to fix this issue on CentOS 7 :
/optiminer-zcash: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./optiminer-zcash)
I installed the compat-libstdc++ but i get the same issue, any idea ? Will be great to have Optiminer on CentOS 7.
/optiminer-zcash: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./optiminer-zcash)
I installed the compat-libstdc++ but i get the same issue, any idea ? Will be great to have Optiminer on CentOS 7.
You need to install the library standalone somewhere, and then point to it when starting the miner.
LD_LIBRARY_PATH=/where_library_is_installed/ ./optiminer-zcash something
Any idea how to fix this issue on CentOS 7 :
/optiminer-zcash: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./optiminer-zcash)
I installed the compat-libstdc++ but i get the same issue, any idea ? Will be great to have Optiminer on CentOS 7.
/optiminer-zcash: /lib64/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by ./optiminer-zcash)
I installed the compat-libstdc++ but i get the same issue, any idea ? Will be great to have Optiminer on CentOS 7.
Lol id love to know about my infamous bullshit claims.
Sure...im the entitled one haha
I am not sure but maybe the ones about building 10-12 GPU rigs or the one about figuring out the RAM timings on GPU's or ....
Unlike you I pay the fees because I do not write miners. If I do not like one I move to another one. Secondly, I do not post shit like you (unless it is warranted) and unlike you I REALLY do have the RAM timings and all the rest of the BIOS mapped out.
I included a little text file with a message for you in it.
Ok, business as usual with linux. Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate?
Spent several hours installing Ubuntu 16.04, installed admgpu-pro 16.40, downloaded optiminer... and got 60 sol/s from single rx 470. No idea how to even check the clocks it's running at. Anyone had a problem like this? What could be the reason for such low hashrate? 
nice, now you are trying to tell the guy how to spend his money.
wtf world, wtf ?!
wtf world, wtf ?!
No, I'm telling him how to spend MY money, which I have regrettably chosen to share with him because I have no other choice if I want to remain profitable. So yes, with kilo hashes free mining power he has from my rigs, I have every right to tell him how to spend my money.
He makes way over 1k USD PER DAY from all of us, so I don't think a 90USD card will hurt his bottom line
What an assshole - I am pretty certain there are other miners you can use, I am also certain that when you use Optiminers miner you agree to the fee and therefore it is NOT your money anymore.
Lastly, you need to go make up some more shit to spew and make up some more of your infamous bullshit claims. Stop acting like an entitled prick
Lol id love to know about my infamous bullshit claims. What I have to say about this subject does not make me an entitled prick. What happens when an open source community is taken over by greed is this exact thing...no I dont have to use his software but I have no choice but to do so, until awesome efforts like zawawa's open source miner catches up to hardware limitations and levels the playing field for everyone, and the little miners take in as much profits as the big farms and the system works as intended.
And no I also dont have anything against rewarding early devs for their optimization work ( I have supported both optiminer and claymore with dev fees since day 1 even though I could turn them off), I am a developer myself and get it (even though all my work is open source). What I do have issues with are ENTITLED devs that charge what is essentially a subscription fee to their software, charge ridiculous fees that eat into most of our profits using our power and hardware, then act like children when the people funding them ask for improvements and fixes to basic issues that a 10% miner should not have.
Sure...im the entitled one haha
You have every right to NOT use miners that charge a development fee. Their licence mentions explicitly that if you use the miner you accept the miners fee. The only reason why you still use Fee based miners is because you are too greedy to have a principled stand rejecting fee based miners, and do not support free miners with enough donations. Its people like you that think that others should work for free so your lazy ass can mine more efficiently. If that is not the DEFINITION of an entitled prick, I do not know what is.
to mine, in order to gain profit zcash minimum VGA type what used ? thanks
nice, now you are trying to tell the guy how to spend his money.
wtf world, wtf ?!
wtf world, wtf ?!
No, I'm telling him how to spend MY money, which I have regrettably chosen to share with him because I have no other choice if I want to remain profitable. So yes, with kilo hashes free mining power he has from my rigs, I have every right to tell him how to spend my money.
He makes way over 1k USD PER DAY from all of us, so I don't think a 90USD card will hurt his bottom line
What an assshole - I am pretty certain there are other miners you can use, I am also certain that when you use Optiminers miner you agree to the fee and therefore it is NOT your money anymore.
Lastly, you need to go make up some more shit to spew and make up some more of your infamous bullshit claims. Stop acting like an entitled prick
Lol id love to know about my infamous bullshit claims. What I have to say about this subject does not make me an entitled prick. What happens when an open source community is taken over by greed is this exact thing...no I dont have to use his software but I have no choice but to do so, until awesome efforts like zawawa's open source miner catches up to hardware limitations and levels the playing field for everyone, and the little miners take in as much profits as the big farms and the system works as intended.
And no I also dont have anything against rewarding early devs for their optimization work ( I have supported both optiminer and claymore with dev fees since day 1 even though I could turn them off), I am a developer myself and get it (even though all my work is open source). What I do have issues with are ENTITLED devs that charge what is essentially a subscription fee to their software, charge ridiculous fees that eat into most of our profits using our power and hardware, then act like children when the people funding them ask for improvements and fixes to basic issues that a 10% miner should not have.
Sure...im the entitled one haha
nice, now you are trying to tell the guy how to spend his money.
wtf world, wtf ?!
wtf world, wtf ?!
No, I'm telling him how to spend MY money, which I have regrettably chosen to share with him because I have no other choice if I want to remain profitable. So yes, with kilo hashes free mining power he has from my rigs, I have every right to tell him how to spend my money.
He makes way over 1k USD PER DAY from all of us, so I don't think a 90USD card will hurt his bottom line
What an assshole - I am pretty certain there are other miners you can use, I am also certain that when you use Optiminers miner you agree to the fee and therefore it is NOT your money anymore.
Lastly, you need to go make up some more shit to spew and make up some more of your infamous bullshit claims. Stop acting like an entitled prick
Some reactions here are pretty pathetic. Keep on trucking, optiminer.
nice, now you are trying to tell the guy how to spend his money.
wtf world, wtf ?!
wtf world, wtf ?!
No, I'm telling him how to spend MY money, which I have regrettably chosen to share with him because I have no other choice if I want to remain profitable. So yes, with kilo hashes free mining power he has from my rigs, I have every right to tell him how to spend my money.
He makes way over 1k USD PER DAY from all of us, so I don't think a 90USD card will hurt his bottom line
nice, now you are trying to tell the guy how to spend his money.
wtf world, wtf ?!
wtf world, wtf ?!
Are you going to fix the index out of range errors with the experimental kernel on tahiti cards?
AFAIK the index out of range errors only happen with nicehash, this does not depend on the kernel.
The experimental kernels seem generally to produce wrong solutions on the GCN1 cards like thaiti. That's why I called them experimental
I need to get hold of such a card to debug which can take some days.Yes I said Tahiti card using your experimental kernel...you have made thousands of dollars with your fee...tahiti cards are sold for less than $100 these days.
Are you going to fix the index out of range errors with the experimental kernel on tahiti cards?
AFAIK the index out of range errors only happen with nicehash, this does not depend on the kernel.
The experimental kernels seem generally to produce wrong solutions on the GCN1 cards like thaiti. That's why I called them experimental
I need to get hold of such a card to debug which can take some days.I think you've made enough fees to buy a couple old used cards. For my OpenCL test rigs I've go a few Pitcairn, a few Tonga, one Hawaii, one Tahiti, and one Ellesmere card.
Hi
i had gpu3 or gpu 5 stop working fast after launch , dont know how to target which one is it .... and reason
thx
i had gpu3 or gpu 5 stop working fast after launch , dont know how to target which one is it .... and reason
thx
Are you going to fix the index out of range errors with the experimental kernel on tahiti cards?
AFAIK the index out of range errors only happen with nicehash, this does not depend on the kernel.
The experimental kernels seem generally to produce wrong solutions on the GCN1 cards like thaiti. That's why I called them experimental
I need to get hold of such a card to debug which can take some days. Jump to: