Topic: [OS] nvOC Nvidia Mining OS FORK v PXA-1.9.6.1 ( UPDATED 1.10.2018 ) - page 10. (Read 3779 times)

This sounds pretty great, I was already planning on switching from smOS die to their web dashnoard claiming my rig to be offline even though it is still mining fine therefore making the whole point of the os useless.

Had my rig stop working today after 3 days of running fine and of course I'm out of town. Looking for something solid that has remote viewing ability that works. Plus I have a Wi-Fi power adapter shipping for cases like today.

Will be checking this out once I'm home tomorrow evening! Install the same as Fullzero's I would imagine?

Some screenshots from the latest version (1.9) of PoisonXA's nvOC
https://imgur.com/gallery/z4FJt

I found the original nvOC by fullzero from a youtube post by Vosk Coin. When I built my first mining rig, I jumped to try out nvOC because of the ease of use. I had a few minor issues that I brought up on Discord. Poisonxa helped me out with and got me up and running. After nearly a month of mining, I'm now running his latest release 1.9 on my trio rig and a new 8gpu rig I just finished building.

PoisonXA's version 1.9 and all of his improvements are amazing. The auto overclocking and temperature controls are super intuitive. Set your max temperature and your wattage and the OS does the rest. I can't wait to see what's next! Thanks PoisonXA for your hardwork and dedication to the project.

Thanks Poison for keeping me mining!

Been running this for a while now. Much better then other programs I have used. Poison and the others in discord are extremely helpful. A great community.
It is super simple. Download the image, flash your drive, update your 1bash file.

You should join the discord channel.

This OS is a must for miners with autoswitch, auto overclock and auto update features. Mining has never been so easy!

Two words: "Do It"

I have been going through all the version through, until 1.8.4
and it's rock solid. haven't had a single reboot or crash since then, and still at a higher hashrate than with the original 1.4

Great stuff from this nvOC version. For a complete noob like me, it does work pretty well. Also, the discord channel has some very awesome people where you can learn a lot.

Keep up the good work !

Been running PoisonXA's version for months, now, works great, he's super responsive, and always willing to help you get your shit working. Join the discord!

Some Tuts:
nvOC V 1.9.1 Released By PoisonXA
Instructions:
Use the enclosed program called etcher to write the img file to a 16gb+ usb stick.
Once completed open the second partition in windows and edit the file 1bash with notepad or notepad++

Feature list include:

################ PAPAMPI_WTM_AUTO_SWITCH ####################
PAPAMPI_WTM_AUTO_SWITCH: when enabled and setup will check www.whattomine.com for the most profitable coin to mine at the time
To setup you must first to go www.whattomine.com and on the top select the gpus you currently have on that rig and hit calculate
once done copy the address on the address bar and paste it inside of 1bash where it says WTM_AUTO_SWITCH_URL=
and then add to the end of the address http://whattomine.com/coins? just add .json and leave the rest the same

It should look like this when your done:
http://whattomine.com/coins.json?utf8=%E2%9C%93&adapt_q_280x=0&adapt_q_380=0&adapt_q_fury=0&adapt_q_470=0&adapt_q_480=3&adapt_q_570=0&adapt_q_580=0&adapt_q_750Ti=0&adapt_q_1050Ti=0&adapt_q_10606=0&adapt_q_1070=0&adapt_q_1080=0&adapt_q_1080Ti=25&adapt_1080Ti=trueð=true&factor%5Beth_hr%5D=875.0&factor%5Beth_p%5D=3500.0&grof=true&factor%5Bgro_hr%5D=1450.0&factor%5Bgro_p%5D=5250.0&x11gf=true&factor%5Bx11g_hr%5D=487.5&factor%5Bx11g_p%5D=4250.0&cn=true&factor%5Bcn_hr%5D=20750.0&factor%5Bcn_p%5D=3500.0&eq=true&factor%5Beq_hr%5D=17125.0&factor%5Beq_p%5D=4750.0&lre=true&factor%5Blrev2_hr%5D=1600000.0&factor%5Blrev2_p%5D=4750.0&ns=true&factor%5Bns_hr%5D=35000.0&factor%5Bns_p%5D=4750.0&lbry=true&factor%5Blbry_hr%5D=11500.0&factor%5Blbry_p%5D=4750.0&bk2bf=true&factor%5Bbk2b_hr%5D=70000.0&factor%5Bbk2b_p%5D=4750.0&bk14=true&factor%5Bbk14_hr%5D=108750.0&factor%5Bbk14_p%5D=5250.0&pas=true&factor%5Bpas_hr%5D=42500.0&factor%5Bpas_p%5D=5250.0&skh=true&factor%5Bskh_hr%5D=1187.5&factor%5Bskh_p%5D=4750.0&factor%5Bl2z_hr%5D=420.0&factor%5Bl2z_p%5D=300.0&factor%5Bcost%5D=0.1&sort=Profitability24&volume=0&revenue=24h&factor%5Bexchanges%5D%5B%5D=&factor%5Bexchanges%5D%5B%5D=abucoins&factor%5Bexchanges%5D%5B%5D=bitfinex&factor%5Bexchanges%5D%5B%5D=bittrex&factor%5Bexchanges%5D%5B%5D=bleutrade&factor%5Bexchanges%5D%5B%5D=cryptopia&factor%5Bexchanges%5D%5B%5D=hitbtc&factor%5Bexchanges%5D%5B%5D=poloniex&factor%5Bexchanges%5D%5B%5D=yobit&dataset=&commit=Calculate

After select on WTM_AUTO_SWITCH_COINS= what coins you want to mine seperate the coins with an ;
the rest is self explanatory.
################ PAPAMPI_WTM_AUTO_SWITCH ####################

###################### TEMPERATURE AND KEEP ALIVE SETTINGS #######################
Having this on the YES will keep all your cards in a certain temperature that you select this feature is required for auto overclock also.
TEMPERATURE_CONTROL="YES"

TARGET_TEMP=70


__FAN_ADJUST=5      # Select how much you want to increase or decrease fan depending on temperature adjustment size in percent


POWER_ADJUST=5     # Select how much you want to increase or decrease the power to the gpu this in in watts

# Difference in actual temperature allowed before action:  Works only if current is BELOW target temp


ALLOWED_TEMP_DIFF=2

 select how much difference there should be before an action is made in temperature
# Restore original power limit if fan speed is lower than this percentage


RESTORE_POWER_LIMIT=90 select to what percentage the fan should reduce to to increase the power back to the maximum you selected

# lowest fan speed that will be used
MINIMAL_FAN_SPEED=50 select whats the lowest fan speed you prefer

Having this on the YES will keep your rig from crashing and if it does crash will reboot it to minimize downtimes




WATCHDOG="YES"
the RI feature under this is a sensitivity measurement which the lower the number the faster it reacts try to keep it under 6 unless its rebooting the pc before it even starts mining.
###################### TEMPERATURE AND KEEP ALIVE SETTINGS #######################

Having this on will allow for there to be specific overclocks that you determine depending on what coin your mining with wtm auto switch in the bottom of 1bash there is a list of algo specific overclcoks to set
damNmad_ALGO_SPECIFIC_OC="NO"

Select if you would like the troubleshooting mode enabled will leave the terminal open while mining to see pre launch diagnostics
DualWindows="YES"

Turn this on if you would like to run teamviewer on the rig Setup an account on teamviewer then connect monitor to rig and login to your account




TEAMVIEWER="NO"
Turn this on if you would like to be able to ssh onto the rig
SSH="YES"
Turn this on if you would like to use the same power limit and overclocks for all cards

POWERLIMIT="YES"

# kk003's video tutorial how to create a telegram bot and get Api Key + User Id:
# https://youtu.be/HS7Q1zH00bs
This will enable the miner to send you telegrams of whats going on use the video above to set it up



BaliMiner_TELEGRAM_ALERTS="YES"

#GPU#AUTOCS=LITE == Set this to your preffered aggressiveness SAFE - LITE - MED - HIGH - BRUTAL
#GPU#SCORE=0 ==      Set this to your preffered starting or set core overclock
#GPU#SMEM=0 ==      Set this to your preffered starting or set mem overclock
#GPU#MAXPL=150 ==  Set this to your preffered maximum powerlimit
#GPU0MAXTEMP=69 == Set this to your preffered maximum temperature
# LITE is the default auto overclock settings for no crash performance.
##############################################################################################

## GPU0
GPU0AUTOCS=LITE   
GPU0SCORE=0
GPU0SMEM=0
GPU0MAXPL=150
GPU0MAXTEMP=69

Some 1.8.4 Screenies:




1.9.3 Screenies:


CHOSN PREVIEW:

Our developer doesn’t ask for a donation, but he provides the ability to donate less than 1% of your mining endeavors on rigs running on nvOC to help support the project. This donation is optional and if you select “NO”, then nothing will be taken. But, remember, he has a family to feed too (including a young baby)!

nvOC is a fork of the original fullzero nvOC mining operating system. Currently, the underlying operating system is Ubuntu 16.04 LTS. But, we are considering changing that for a more lightweight platform.

As of right now, nvOC supports telegram, SSH, and Teamviewer, all out of the box. Of course, you need to know your way around command line for SSH, but otherwise, the software is designed to be robust.

You can find our latest downloads in the #downloads channel of our Discord, where there are frequently posted updates for the software and bug fixes, also where the developer and his dinosaurs provides software support for free.

nvOC is fully supported from a USB boot drive and requires nothing fancy in terms of I/O usage or the like. In fact, we recommend you use USBs over a mechanical or SSD drive.

To use the software it is simple, download it from the #downloads channel in our Discord, unzip it, run the etcher software, select your USB drive, and Etch. No complicated editing of grub menus or frustrating linux quarks. Once etched, go ahead and boot up the USB and let the software check for any minor updates, the software will usually reboot after the update.

Everything you need is literally located in the $Home directory of the Ubuntu Install. In most cases, all you need to do is edit the 1Bash with your mining details and confirm which built in mining software you wish to you, and off you are.

Literally, you’re done for a basic 1-coin configuration. Save the bash, and click on the terminal icon. That easy.



Features Set :

• Auto-overclocking technology: System will detect which manufacture makes your card, and apply overclocks to the card to maximize your performance on the fly.
  
  Dual Windows for added system visability: See errors and an extensive log to make sure everything is optimal.
  
  Watchdog: System will watch for system instability and take the appropriate action, either by restarting the system, the miner, or even each individual GPU that fails.
  
  Individual overclocking parameters: You can set individual overclocks per card that you wish nvOC to maintain.
  
  Quake and Terminal commands: Troubleshooting and managing your miners have never been easier.
  
  Set Power limits, Fan Speeds, and Temperature Controls: all within the confinement of $HOME.
  
  Built-in Profitability Detection System: Do you like to mine multiple coins, but don’t like checking whattomine every second of the day? Well, nvOC will check the site for you and apply the set conditions that you want. This work was originally created by Papami, enhanced by PoisonXA
  
  Algos Everywhere!!!: nvOC supports more algorithms than you thought ever existed. Head over to our pastebin for specific patch note details.

Support Every Day: PoisonXA and his dinosaurs are on Discord to help solve your problems. If we can’t talk you through it, we can remote into your machine, once you enable TeamViewer and solve most problems within minutes.

The future and what it entails for PXA nvOC:

My Pledge to PXA's nvOC User Base:





( NEW)

Zip File sha256:
Image File sha256: