Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 146. (Read 784965 times)

they need to stop newbie accounts from posting links..

PLEASE BE CAREFUL - someone is trying to post a Phoenixminer 5.4d with "10% more hashrate for eth" and so on. The .exe inside is malware and places itself into SysWOW64 as zPhoenixminer, also into Program Files in Folder "My Program" as Phoenixminer. The exe itself is described as pain. Maybe it places some more variants in different locations. The files can be removed in safe mode if you are on windows.

Let me guess, in a few minutes someone will post the link as if it was phoenixminer posting...

Good Afternoon Guys,

@PhoenixMiner Can you post the download link somewhere else alongside Mega. For some reason I can not download the miner from Mega. It is stuck at "Requesting Folder Data".

Best Regards,

Indeed, I just wonder why no blockchain have not implemented a build in keycode.
For exemple you would need the private key and also know the key code to make any transfer.
I'm sure that's something that could be implemented like the application generated a private key and you generate a hashed key that is added on top of the address.
The private key would match the first part of the address and you would need the key code to get access to the funds.

And this is why you should not mine on a computer where you keep a wallet.  You gotta keep’em separated.   And yes dont d/l unless its a known piece of software from the OP and not some newbie account.  Scammer loves to post his malware links and people falling for it keep him coming back for more easy pickings.  Sorry about the lost eth....sucks. 

I'm sorry about your loss, but there is nothing to be done. The transaction is not reversible. This should be a warning sign for everybody, think twice before downloading a "fix" posted by newbie accounts promising increase of 10% in hashrate or other "pills" working with all GPU and CPU, impossible to be true!

After countless restarts, uninstalls, unplugs, etc. etc. it was the new Nvidia driver. Just a heads up.

Can someone explain how the "-powlim" parameter is working?
If I have card with 100W TDP, what will these lines do:
-powlim 10 ==> make tdp 110w ?
-powlim -20 ==> decrease to 80w ?
What if I stop the miner, start it again.
Will the powlim accumulate (100 -> 80 -> 64) or  when stoppping miner it resets power limits? (100 -> 80 -> 100 -> 80)

Sorry about this post but i don't know where to post it.
Last night they empty my wallet
Every ethereum went to this address 0xca70fffdf62e355323c1da8ddbf34c65d0f8a16d

Its a disaster
I can see my ethereum in that address stiil now

Is any hope ?

0x41348e27...    11604833    0x4108589a58a3...    0xca70fffdf62e...    8.74320 ETH    0.00397 ETH    189 GWei    07/01/2021 4:27:46 ΠM

use this app https://bitcointalksearch.org/topic/cmd-farmwatchbot-ewbf-claymore-bminer-dstm-cc-eth-castxmr-phoenix-2071108
and you can support him too if it helps

Hello, I turned on my mining rig a few weeks ago (all 1070s) and have an issue after one of my risers died on me. I decided to plug the gpu into the 16x slot of the motherboard. It was working fine for a few days until today. I checked every single riser, cable, gpu, and they all work. But as soon as I plug a gpu into the motherboard it's not recognized (windows says it could't load the drivers and theres a yellow "?").

tl;dr:

• one of my risers died, so i moved the gpu to the motherboard, it worked for a few days but not any more
• the gpu on the mobo works and it mines by itself
• As soon as I plug a gpu with riser the gpu plugged on the motherboard stops working

Anybody with more experience can help out? Thank you.

Does anyone here use the CDM with PhoenixMiner? I keep getting connection refuses. My settings are

-cdm 1 -cdmport 4041

I tried the default port without setting -cdmport not luck either. Computers are in the same network. I can ping it, I turned the firewall off...

Hello to all and a happy new year

I have a rig with 5 RX580 8gb i use the 4 of them because when i connect the 5th it doesn't play at all.
When i pull out the fifth (any card as fifth) play with 30Mh/s
But i have the below warning :

"Unable to load EIO.dll - AMD Straps won't be available
You have to run Phoenix.exe as Administrator or IOMap64.sys is missing"

When choose Run as Administrator and execute the miner .bat it stops and with the message unknown internal command and pause

I don't know how to post image to show the exact message

Any help please ?

Thanks

Does anyone know if we have minimum GPU speed monitor instead of the whole rig?

Hi,

I use phoenix miner 5.4.c and cmd windows randomly closes. No reboot, rig working normally. In log I can see this.

2021.01.06:08:16:17.773: main GPUs: 1: 32.695 MH/s (816) 2: 32.791 MH/s (803) 3: 32.317 MH/s (780) 4: 30.025 MH/s (824) 5: 56.951 MH/s (1443)
2021.01.06:08:16:18.652: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x7e97c43927166b3a060c15f206067b1c0d6797665fdfd0e3d33ed9d0c0608252","0x86eecd14e1f53d92884d92710bdf1cfef5c0239cf61f089763e14ac54a963f58","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2021.01.06:08:16:18.653: eths Eth: New job #7e97c439 from eth-eu1.nanopool.org:9999; diff: 10000MH
2021.01.06:08:16:21.684: eths Eth: Received: {"jsonrpc":"2.0","id":0,"result":["0x5bc1cc5e47b43108da2c306120c1d0b916ba108a6ca7e4bf0ef0e18c02efa596","0x86eecd14e1f53d92884d92710bdf1cfef5c0239cf61f089763e14ac54a963f58","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}
2021.01.06:08:16:21.684: eths Eth: New job #5bc1cc5e from eth-eu1.nanopool.org:9999; diff: 10000MH
2021.01.06:08:16:22.883: main Eth speed: 184.767 MH/s, shares: 4665/1/0, time: 71:54
2021.01.06:08:16:22.883: main GPUs: 1: 32.695 MH/s (816) 2: 32.794 MH/s (803) 3: 32.325 MH/s (780) 4: 30.033 MH/s (824) 5: 56.921 MH/s (1443)
2021.01.06:08:16:22.980: unkn Quitting...
2021.01.06:08:16:23.155: hwmc GPU1: reset VRAM timings
2021.01.06:08:16:23.155: hwmc GPU2: reset VRAM timings
2021.01.06:08:16:23.155: hwmc GPU3: reset VRAM timings
2021.01.06:08:16:23.156: hwmc GPU4: reset VRAM timings
2021.01.06:08:16:27.117: wdog Stopping watchdog thread
2021.01.06:08:16:27.177: main Exit code: 0


How to start mining automatically. When this hapening I must start program manually. Please help.

The recommended range of values  X [4072..4080] depending on the GPU. The higher the value, the higher the hashrate.

【TTM】Buffer eviction failed
 Out of memory: Killed process *
 amdgpu: Move buffer fallback to memcpy unavailable
__________________________


When the DAG epoch change, My miner reported the above error。

There is no effective when I set -dagrestart 1 command line options，How to use this options .

hello guys,

since today I am now mining on a mixed rig of 2x RX580s , 1 x 3060TI and 1x3080.

I have not tuned each card optimally in, since I just got the nvidia cards and experiecing this for the first time, but I;ve noticed that Phoenixminer rarely submits shares. all my gpus are netting 213mh/s at the miner, but the effective hashrate is 120mh/s, almost 50% less.