PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 155.

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: groovytechno on December 27, 2020, 11:09:06 AM

Quote from: Deafran on December 26, 2020, 09:31:34 PM

Quote from: groovytechno on December 26, 2020, 10:51:04 AM

For my 1000 mh/s Nanopool shows that i receive 0.04526 ETH per day.

My concern is that my current and average hashrate at the pool-side is always hovering between 520-740 mh/s while the reported hashrate is accurate at 950-1000 mh/s

Mining ETC has no issue with this at all. Average hashrate is pretty spot on with my reported hashrate.

yeah, its a bit low (0.04526)

i got 0.17343 - 0.18 xxx for 3Gh/s, some time can be 0.2xxxx ETH per day
2 month ago can reach 0.25xxx ETH per day

Interesting. Mind if I ask what pool and mining software you're using?

eth-asia1.nanopool.org

3 rig with ethminer and other with PhoenixMiner (since claymore cant mining)

mostly ethOS only 3 rig using W10(PhoenixMiner)

hesido

jr. member

Activity: 158

Merit: 5

With all these low-life scammers trying to post links to malware, I think there should be an option to forbid new accounts to post links, or any text that looks like link in case they still do it without the proper tags.

Bug Report:
I think I have encountered a bug;
When you use auto-tuning, and change a few parameters on some of the gpu's in config (but not all), the ones that the parameters changed are applied previous GT values, but the rest of the cards are reset to default tuning values and hashrates of those cards drop significantly. The remedy is restarting miner or re-starting tuning. The fix should be easy, just make sure to re-apply previous known tuning values to ALL cards. Better yet, if auto-tuning is on, the cards that have their clock settings change should go back into auto-tune mode, while the rest could stay as is, instead of re-applying last known tuning parameter.

batsonxl

member

Activity: 1208

Merit: 27

Quote from: matmator on December 27, 2020, 04:19:14 PM

Quote from: batsonxl on December 27, 2020, 03:30:32 PM

Quote from: matmator on December 27, 2020, 01:17:02 PM

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

Mclock 4500? what card is that?

1070 ti

nvidia cards you have to write -mclock +400 for increase +400. amd cards uses direct numer like 2150.

matmator

sr. member

Activity: 487

Merit: 252

bou !

Quote from: theerachate.p on December 27, 2020, 02:34:35 PM

Quote from: matmator on December 27, 2020, 01:17:02 PM

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

never use parameters to set your overclocking, use third party software is much more stable

don't say anything please! I always did, never had a problem!

matmator

sr. member

Activity: 487

Merit: 252

bou !

Quote from: batsonxl on December 27, 2020, 03:30:32 PM

Quote from: matmator on December 27, 2020, 01:17:02 PM

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

Mclock 4500? what card is that?

1070 ti

batsonxl

member

Activity: 1208

Merit: 27

Quote from: matmator on December 27, 2020, 01:17:02 PM

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

Mclock 4500? what card is that?

theerachate.p

newbie

Activity: 15

Merit: 0

Quote from: matmator on December 27, 2020, 01:17:02 PM

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

https://nsa40.casimages.com/img/2020/12/27/201227072312451120.png

never use parameters to set your overclocking, use third party software is much more stable

matmator

sr. member

Activity: 487

Merit: 252

bou !

hello, since the last update, my gpu memory setting no longer works,

here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0

HappySwedishGuy

newbie

Activity: 2

Merit: 0

Is it possible to do so it mines at another adress for an short period of time? Just like the devfee kinda but to another adress aswell

groovytechno

newbie

Activity: 49

Merit: 0

Quote from: Deafran on December 26, 2020, 09:31:34 PM

Quote from: groovytechno on December 26, 2020, 10:51:04 AM

For my 1000 mh/s Nanopool shows that i receive 0.04526 ETH per day.

My concern is that my current and average hashrate at the pool-side is always hovering between 520-740 mh/s while the reported hashrate is accurate at 950-1000 mh/s

Mining ETC has no issue with this at all. Average hashrate is pretty spot on with my reported hashrate.

yeah, its a bit low (0.04526)

i got 0.17343 - 0.18 xxx for 3Gh/s, some time can be 0.2xxxx ETH per day
2 month ago can reach 0.25xxx ETH per day

Interesting. Mind if I ask what pool and mining software you're using?

vagmor

newbie

Activity: 8

Merit: 0

Quote from: dragonmike on December 27, 2020, 05:26:52 AM

Quote from: doctorman on December 21, 2020, 10:01:22 AM

Quote from: theerachate.p on December 21, 2020, 06:14:20 AM

Quote from: dragonmike on December 20, 2020, 07:43:44 AM

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists?
so it is not a driver issue, it is a general rtx 3000 series issue

If I start on +1200 mem clock I can survive but I still get bunch of invalid shares , if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock

I have an MSI and a Zotac 3060 ti , Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both

I get 59-60 MH on the 900+ mem
and can get close to 64 MH if I go up to +1500 and give it some power like 66% to 68%

Happens when dual-mining with ZIL too.
Have you tried another miner?

same here with 2 3060ti to 2 different rigs with exactly this behavior

ivvi30

newbie

Activity: 18

Merit: 0

Quote from: Deafran on December 26, 2020, 09:08:38 PM

Quote from: ivvi30 on December 26, 2020, 05:25:45 PM

PhoenixMiner 5.4c: Asus rog strix RX570 4gb ETH 11,92mh
https://ibb.co/YP4X8V7

Compute mode Huh

so included!

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: doctorman on December 21, 2020, 10:01:22 AM

Quote from: theerachate.p on December 21, 2020, 06:14:20 AM

Quote from: dragonmike on December 20, 2020, 07:43:44 AM

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists?
so it is not a driver issue, it is a general rtx 3000 series issue

If I start on +1200 mem clock I can survive but I still get bunch of invalid shares , if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock

I have an MSI and a Zotac 3060 ti , Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both

I get 59-60 MH on the 900+ mem
and can get close to 64 MH if I go up to +1500 and give it some power like 66% to 68%

Happens when dual-mining with ZIL too.
Have you tried another miner?

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: aloneforever on December 26, 2020, 11:22:22 AM

hello, i just try to mining with phoenixminer but all what i can see after start it is :
2020.12.26:18:17:08.565: main Phoenix Miner 5.1c Windows/msvc - Release build
2020.12.26:18:17:08.565: main Cmd line: -pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444 -wal ........................ -coin eth
2020.12.26:18:17:08.615: main CUDA version: 11.0, CUDA runtime: 8.0
2020.12.26:18:17:08.649: main No OpenCL platforms found
2020.12.26:18:17:08.649: main Available GPUs for mining:
2020.12.26:18:17:08.649: main GPU1: GeForce GTX 1080 Ti (pcie 2), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
2020.12.26:18:17:08.649: main GPU2: GeForce GTX 1080 Ti (pcie 3), CUDA cap. 6.1, 11 GB VRAM, 28 CUs
and after this all waht i see is : Press any key to continue and close the software

here my bat file for my 1080ti

PhoenixMiner.exe -pool eth-eu2.nanopool.org:9999 -wal 0xxxxxx -worker Zinc -epsw x -mode 1 -powlim -20 -tt -85 -tmax 85 -cclock +100 -mclock +600 -straps 5 -ftime 55 -nvNew 1 -Rmode 1 -log 0 -mport 0 -etha 0 -retrydelay 1 -coin eth
pause

phoenixminer.exe-run as administrator
win10

and not using after burner

rdbase

legendary

Activity: 2828

Merit: 1497

Join the world-leading crypto sportsbook NOW!

Quote from: ivvi30 on December 26, 2020, 05:25:45 PM

PhoenixMiner 5.4c: Asus rog strix RX570 4gb ETH 11,92mh
https://ibb.co/YP4X8V7

Whoa! That is low compared to what they were getting last week at 21mh/s.
There was a chart showing the dates of each epoch and what mh/s the 4gb should still be getting until they hit those target dates. Just like the one which just past on the 24th.
I am still able to mine with my lone 4gb card at 21.5mh/s but it was at 31.5mh/s a month ago. Undecided

So the hashrate has been dropping off very rapidly every week.

carloshd

newbie

Activity: 4

Merit: 0

"wdog 0" (disable) not working on Linux HiveOS "PhoenixMiner 5.4c", any solution?

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: groovytechno on December 26, 2020, 10:51:04 AM

For my 1000 mh/s Nanopool shows that i receive 0.04526 ETH per day.

My concern is that my current and average hashrate at the pool-side is always hovering between 520-740 mh/s while the reported hashrate is accurate at 950-1000 mh/s

Mining ETC has no issue with this at all. Average hashrate is pretty spot on with my reported hashrate.

yeah, its a bit low (0.04526)

i got 0.17343 - 0.18 xxx for 3Gh/s, some time can be 0.2xxxx ETH per day
2 month ago can reach 0.25xxx ETH per day

Deafran

jr. member

Activity: 49

Merit: 4

Quote from: ivvi30 on December 26, 2020, 05:25:45 PM

PhoenixMiner 5.4c: Asus rog strix RX570 4gb ETH 11,92mh
https://ibb.co/YP4X8V7

Compute mode Huh

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: adaseb on December 26, 2020, 09:00:48 PM

Because mining ETC yields less than half the profits. Mining ETH is still most profitable on the 4GB. I got a few running on that lolminer but it runs at 24MH/s. Every DAG the speed slows down by 1 MH/s per DAG, most likely going to use for another 2 weeks and just craiglist the GPUs.

Nothing really worth mining with 4GB cards anymore. There is KawPow which yields like $0.25 after 10 cent power costs. ETH profits are almost triple of that. Then there are days when the fees are high and you can easily make 50-100% more profits.

Just sad you cant mine ETH anymore on the 4GB cards.

Funny, for the past 2 years prior july eth has been in negative profit, $0.10 per day per 30mhs net would have been great on those past 2 years but it was not even that, now on the bullrun that is just not good enough hehe, people are getting spoiled again. I agree with you, do not bother using them to mine anything else because as we know is not worth it, better just sell those 4gb while you can get a good price for them, there are gamers that want them, you will be able to sell for $100 ~ $150 easily.

adaseb

legendary

Activity: 3808

Merit: 1723

Quote from: Digital_Seytan on December 26, 2020, 05:58:46 PM

Quote from: ivvi30 on December 26, 2020, 05:25:45 PM

PhoenixMiner 5.4c: Asus rog strix RX570 4gb ETH 11,92mh
https://ibb.co/YP4X8V7

why you not mining ETC ?

Because mining ETC yields less than half the profits. Mining ETH is still most profitable on the 4GB. I got a few running on that lolminer but it runs at 24MH/s. Every DAG the speed slows down by 1 MH/s per DAG, most likely going to use for another 2 weeks and just craiglist the GPUs.

Nothing really worth mining with 4GB cards anymore. There is KawPow which yields like $0.25 after 10 cent power costs. ETH profits are almost triple of that. Then there are days when the fees are high and you can easily make 50-100% more profits.

Just sad you cant mine ETH anymore on the 4GB cards.

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 155. (Read 785074 times)