PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 151.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: soda37 on January 01, 2021, 08:50:15 AM

Quote from: Metroid on January 01, 2021, 08:37:52 AM

Yeah that confirms, 24 linux and 16 on windows, but on windows might be even lower, in your case 12.

No, it does not answer to the question if you tested this with phoenix miner or just repeating well known info. Seems just chatter Sad

When I said it confirms, it means that I had tested here and that image confirmed what I tested or you could say vice versa.

DGBfanster

member

Activity: 122

Merit: 10

Any solution to rejects on the RTX 3000 series? Same config I used 2 weeks ago now gives rejects randomly. Sometimes it does and sometimes it doesn't. I even lowered the OC quite a bunch but it still gives rejects randomly.

hesido

jr. member

Activity: 158

Merit: 5

Quote from: soda37 on January 01, 2021, 06:10:58 AM

Quote from: bitquad on December 30, 2020, 08:44:35 PM

Can you share details on how you are applying the claymore straps?

You can not apply claymore straps in phoenix directly (yet?). Use amdmemtweak. You can read current staps for AMD cards when running claymore with this tool and then apply it before starting phoenix.

When you apply straps on AMDMemTweak, does it set the same value for all frequency straps? When it reads the straps, it reads from the current frequency state which may be different when running idle or half load, but when you set something using AMDMemTweak, I'm guessing it needs to make the straps the same for all frequencies. Is this the case?

cali747

newbie

Activity: 15

Merit: 0

i am still using ver 5.1c on my rx 8gb, still works fine.

soda37

jr. member

Activity: 63

Merit: 1

Quote from: Metroid on January 01, 2021, 08:37:52 AM

Yeah that confirms, 24 linux and 16 on windows, but on windows might be even lower, in your case 12.

No, it does not answer to the question if you tested this with phoenix miner or just repeating well known info. Seems just chatter Sad

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: soda37 on January 01, 2021, 08:34:51 AM

Yeah that confirms, 24 linux and 16 on windows, but on windows might be even lower, in your case 12.

soda37

jr. member

Activity: 63

Merit: 1

Quote from: Metroid on January 01, 2021, 08:19:00 AM

Quote from: soda37 on January 01, 2021, 08:02:30 AM

Quote from: Metroid on December 31, 2020, 10:41:28 AM

Quote from: keksik on December 31, 2020, 10:21:41 AM

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

rx 580 4gb should be getting around 22 to 24mhs right now.

Right now on windows 10 rx570 getting 12 Mh/s, just tested. The same card is getting 30,9 Mh/s on ETC.

On windows yes, on linux is 24mhs.

And keksik asked about win 10 (sic!) Have you tested or just parroting well know data e.g. from here https://2miners.com/blog/how-to-mine-ethereum-and-ethereum-classic-on-4gb-gpus/ ?

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: soda37 on January 01, 2021, 08:02:30 AM

Quote from: Metroid on December 31, 2020, 10:41:28 AM

Quote from: keksik on December 31, 2020, 10:21:41 AM

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

rx 580 4gb should be getting around 22 to 24mhs right now.

Right now on windows 10 rx570 getting 12 Mh/s, just tested. The same card is getting 30,9 Mh/s on ETC.

On windows yes, on linux is 24mhs.

soda37

jr. member

Activity: 63

Merit: 1

Quote from: Metroid on December 31, 2020, 10:41:28 AM

Quote from: keksik on December 31, 2020, 10:21:41 AM

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

rx 580 4gb should be getting around 22 to 24mhs right now.

Right now on windows 10 rx570 getting 12 Mh/s, just tested. The same card is getting 30,9 Mh/s on ETC.

soda37

jr. member

Activity: 63

Merit: 1

Quote from: bitquad on December 30, 2020, 08:44:35 PM

Can you share details on how you are applying the claymore straps?

You can not apply claymore straps in phoenix directly (yet?). Use amdmemtweak. You can read current staps for AMD cards when running claymore with this tool and then apply it before starting phoenix.

hesido

jr. member

Activity: 158

Merit: 5

Bug Report:
System Freezes when shutting down Phoenixminer.

This is probably more related to my rig, but I think it's solvable. When I shutdown phoenixminer from its close button, entire machine freezes (Windows, Drivers 20.8.1). However, when I turn off GPU's manually one by one, I can then shutdown phoenixminer without problems.

This is a new thing that began happening when I added 5700xt's to the rig, but I made many changes to the rig (replaced risers, added a PSU etc so I cannot pin point the exact cause). Whatever the cause, if we can have a slow shutdown option, it surely would solve the problem (like -gser, but for shutdown!) It'd be really nice if you considered such an option. Thanks..

Blockpusher

newbie

Activity: 21

Merit: 0

Quote from: ak313 on December 31, 2020, 01:38:04 PM

i have got zotac mini 1070 ..why my hashrate drops with new dag .. it is 8 gig memory

I guess you're on win 7.
You have to upgrade 7 to 10, or use a Linux OS.
I've had the same problem with my 1070 rig. I just downloaded the "Windows10Upgrade9252.exe" on the Microsoft web site. (no serial requested.)
Everything works better for me on w10, even with some algorithms crashing under win7.

I don't know why, but i got more hashrate with OC core (+170) and memory tweak have no more impact with new epoch.
I have 28 mh/s for 70% power.

Prosnip

member

Activity: 118

Merit: 10

What settings should I use for 1060 6g and 1080 8g graphics cards?

klondike_bar

legendary

Activity: 2128

Merit: 1005

ASIC Wannabe

I'm pretty sure this isn't possible - but can phoenixminer be configured to run multiple algorithms (ie: ETH on 8GB cards and KAWPOW on 3GB cards)?

Im using SimpleMining.net and am not aware of any means to run more than one mining kernel per rig.

Tjiuz

newbie

Activity: 30

Merit: 0

Guys... im using HiveOS & Nicehash Ethash... before use nicehash, i mining in nanopool & never got reject / invalid shares... but, now i always get reject / invalid shares in nicehash... any1 can help me ?

https://i.ibb.co/1rnntj9/2021-01-01-042350.png
https://i.ibb.co/8KNz301/2021-01-01-042434.png
https://i.ibb.co/c65CJd3/2021-01-01-023828.png

sobertram

newbie

Activity: 12

Merit: 0

Quote from: DejavuUS on December 31, 2020, 09:47:45 AM

Trying to mine on my 50th Annv edition of RX 5700 Xt and Phoenix miner 5.4c is seeing 2 thread but both 0MH/s on both, I have restarted no luck what could be the issue here please? I am using Driver 20.4.2 version.

I only have 1 GPU not 2 but phoenix is showing 2 GPU. after loading dag still showing 0MH/s and then it hangs after a few minutes

Quote

2020.12.31:14:43:50.496: main No CUDA driver found
2020.12.31:14:43:52.091: main OpenCL driver version: 20.4.x
2020.12.31:14:43:52.104: main Available GPUs for mining:
2020.12.31:14:43:52.104: main GPU1: AMD Radeon RX 5700 XT 50th Anniversary (pcie 5), OpenCL 2.0, 8 GB VRAM, 40 CUs
2020.12.31:14:43:52.104: main GPU2: AMD Radeon RX 5700 XT 50th Anniversary (pcie 5), OpenCL 2.0, 8 GB VRAM, 40 CUs
2020.12.31:14:43:52.107: main ADL library initialized
2020.12.31:14:43:53.545: main Eth: the pool list contains 2 pools (2 from command-line)
2020.12.31:14:43:53.545: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2020.12.31:14:43:53.545: main Starting GPU mining
2020.12.31:14:43:53.545: main Matched GPU1 to ADL adapter index 0 (method 2)
2020.12.31:14:43:53.562: main GPU1: AMD driver 20.4.2
2020.12.31:14:43:53.562: main GPU1: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.12.31:14:43:53.562: main GPU1: using AMD driver ver 20.4.2
2020.12.31:14:43:53.563: main Matched GPU2 to ADL adapter index 0 (method 2)
2020.12.31:14:43:53.575: main GPU2: AMD driver 20.4.2
2020.12.31:14:43:53.575: main GPU2: Created ADL monitor for adapter 0; overdrive version: 8 ( Cool

2020.12.31:14:43:53.575: main GPU2: using AMD driver ver 20.4.2
2020.12.31:14:43:53.631: hwmc GPU1: set auto fan: 62C target temp (min fan 20, max fan 100)
2020.12.31:14:43:53.631: hwmc GPU2: set auto fan: 62C target temp (min fan 20, max fan 100)
2020.12.31:14:43:53.694: wdog Starting watchdog thread
2020.12.31:14:43:54.246: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2020.12.31:14:43:54.247: main GPU1: 15C 23% 8W, GPU2: 15C 23% 8W

2020.12.31:14:44:39.305: main *** 0:00 *** 12/31 14:44 **************************************
2020.12.31:14:44:39.305: main Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:00
2020.12.31:14:44:39.305: main 2 GPU(s) are auto-tuning. Hashrate may be low until they are ready.
2020.12.31:14:44:39.305: main Eth: Accepted shares 0 (0 stales), rejected shares 0 (0 stales)
2020.12.31:14:44:39.305: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2020.12.31:14:44:39.305: main Eth: Average speed (5 min): 0.000 MH/s
2020.12.31:14:44:39.305: main
2020.12.31:14:44:40.334: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.12.31:14:44:40.334: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0)

If you are on windows, try using the recommended drivers from amd, "OpenCL driver version: 20.11.2", and try again.

ak313

newbie

Activity: 14

Merit: 0

i have got zotac mini 1070 ..why my hashrate drops with new dag .. it is 8 gig memory

casslo

newbie

Activity: 9

Merit: 0

Quote from: keksik on December 31, 2020, 10:21:41 AM

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

its normal in windows, switch to linux m8, this is what im getting on hiveos rn:

https://i.imgur.com/PVHjTge.jpg

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: keksik on December 31, 2020, 10:21:41 AM

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

rx 580 4gb should be getting around 22 to 24mhs right now.

keksik

jr. member

Activity: 169

Merit: 1

Hello i have some amd rx 580 4GB, it is normal that i am getting 12.5mhs? I know its due to dag size but it is ok that low? On etc im getting 30mhs as usual. Is there anything i can do to improve hash? Using win 10 amd 12.10.1 driver

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 151. (Read 785022 times)