PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 168.

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: xMindx163 on December 16, 2020, 04:08:46 PM

It's time to build with a newer version of CUDA. NBMiner and T-rex use this. They have a higher speed with less power consumption. Especially on RTX3000 cards

Are you sure of this ? I get exactly the same hashrate with t-rex latest or phoenix with my 3060ti

jedimindtrix

newbie

Activity: 9

Merit: 0

Quote from: nani202 on December 16, 2020, 05:41:38 PM

Hi guys
i'm trying to mine with my gtx 1080ti but i got an error "NO OPENCL PLATEFORMs FOUND press any button to continue"
any help

Yeah. I'm having the same issue with my RTX 3080. Just from reading through the last couple of pages of comments it sounds like it has something to do with the 460.79 GeForce driver for Cyberpunk but I don't have conformation yet.

nvml.dll fix didn't work for me.

sreetglide2011

newbie

Activity: 10

Merit: 0

Quote from: flyboynyc on December 17, 2020, 12:33:32 AM

IS this thread for GPU/CPU miners using their computers?

This is for people using Phoenix miner and their GPU for mining.

No CPU mining involved

flyboynyc

newbie

Activity: 19

Merit: 0

IS this thread for GPU/CPU miners using their computers?

j2james

newbie

Activity: 80

Merit: 0

Quote from: j2james on December 16, 2020, 11:51:51 AM

Hi All. Some days I have the following problem.

All my cards ignore any values of memory clock (MC) overckloking (CC and PL changes work correct). All the time I use MSI AB. I tried to use PM overclocking params, but result is the same.

My mining speed has decreased from 180 to 128. Please help!

--------------------------
6 * ROG STRIX-GTX1070-O8G-GAMING, Win 7 Home Extended, 8GB RAM

PM 5.3b with the following config:
-nvidia
-cdm 2
-cdmport 3333
-cdmpass xxxxxxx
-minRigSpeed 120
-rmode 2
-tstop 70
-tstart 40
-logsmaxsize 0
-nvf 2
-hstats 2

I have found a workaroud in other forums. Using
-eres 0
fixes the problem!

doctorman

newbie

Activity: 35

Merit: 0

Quote from: xMindx163 on December 16, 2020, 04:08:46 PM

It's time to build with a newer version of CUDA. NBMiner and T-rex use this. They have a higher speed with less power consumption. Especially on RTX3000 cards

isn't CUDA 11 the latest?
I was getting higher HAsh with Trex but I would get more failed shares.
with Phoneix I can raise the mem all the way to +1500 on rtx 3060 ti but only after the Dag is done. I have to start the phonex on mem of max +1000 or I end up with failed shares
following that I can run at 63.4MH on 130W

nani202

newbie

Activity: 19

Merit: 0

Hi guys
i'm trying to mine with my gtx 1080ti but i got an error "NO OPENCL PLATEFORMs FOUND press any button to continue"
any help

xMindx163

newbie

Activity: 37

Merit: 0

It's time to build with a newer version of CUDA. NBMiner and T-rex use this. They have a higher speed with less power consumption. Especially on RTX3000 cards

abg00

jr. member

Activity: 288

Merit: 1

trouble 1070ti
pm 9.4c
win10
drivers 457.51

error GPU1: unable to get fan speed - Unknown Error (999)

sreetglide2011

newbie

Activity: 10

Merit: 0

Quote from: MAX-M4 on December 16, 2020, 03:00:19 PM

Dear respected sir

please help me
i'm using "PhoenixMiner" 5.3 and my command line is
"C:\Users\LUCKY\Desktop\PhoenixMiner_5.3b\"PhoenixMiner.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xfe4e00aa52657cc970c262337135fa67b5732639.LUCKY-1/[email protected] -epsw x -rxboost 1
then open .bat right click run as administrator working fine rxboost apply successfully
but i'm pasting .bat shortcut in windows system startup folder for auto start miner in power loss situation or restart system
then power loss again system start miner start but -rxboost not applied
PhoenixMiner showin this error (please run PhoenixMiner.exe as administrator)
so i request you to please guide me
sorry my english is not good
Thanks

"PhoenixMiner.exe" is the file that needs to be set to run as administrator

br2459

full member

Activity: 269

Merit: 102

Quote from: jmcguckin on December 16, 2020, 02:53:43 PM

2 questions:

1) Is phoenixminer open source?

2) On startup, phoenixMiner prints out a list of GPU's. On each line is a percentage value. What does this number represent?

Thanks,

Joe

1) It is not open source.

2) The percentage is the DAG being loaded into memory on each GPU. Once it reaches 100% mining will start.

MAX-M4

newbie

Activity: 2

Merit: 0

Dear respected sir

please help me
i'm using "PhoenixMiner" 5.3 and my command line is
"C:\Users\LUCKY\Desktop\PhoenixMiner_5.3b\"PhoenixMiner.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xfe4e00aa52657cc970c262337135fa67b5732639.LUCKY-1/[email protected] -epsw x -rxboost 1
then open .bat right click run as administrator working fine rxboost apply successfully
but i'm pasting .bat shortcut in windows system startup folder for auto start miner in power loss situation or restart system
then power loss again system start miner start but -rxboost not applied
PhoenixMiner showin this error (please run PhoenixMiner.exe as administrator)
so i request you to please guide me
sorry my english is not good
Thanks

jmcguckin

newbie

Activity: 5

Merit: 0

2 questions:

1) Is phoenixminer open source?

2) On startup, phoenixMiner prints out a list of GPU's. On each line is a percentage value. What does this number represent?

Thanks,

Joe

j2james

newbie

Activity: 80

Merit: 0

Dear @PhoenixMiner developers, there are two problems.

1. Problem with hashrate in PM on 1070 with 8GB under Windows 7. I hope you are already know about that. Memory overclocking do not change hashrate. Are you going to fix it?

2. Config file reload does not apply changes in two cases:
- if -mclock is removed\commented in config
- if -mclock was set to 0 (-mclock 0)
So there is not a way to reset -mclock to 0 on the fly.

joaogti36

full member

Activity: 162

Merit: 100

Quote from: Digital_Seytan on December 16, 2020, 01:01:08 PM

Quote from: j2james on December 16, 2020, 11:51:51 AM

Hi All. Some days I have the following problem.

All my cards ignore any values of memory clock (MC) overckloking (CC and PL changes work correct). All the time I use MSI AB. I tried to use PM overclocking params, but result is the same.

My mining speed has decreased from 180 to 128. Please help!

--------------------------
6 * ROG STRIX-GTX1070-O8G-GAMING, Win 7 Home Extended, 8GB RAM

It is and remains a problem with the gtx 8gb cards with phoenixminer as an alternative you may also be able to use Trexminer which does better, unfortunately better instead of ethereum ETC mining much higher hashrate and much lower energy use

if your mining eth.... increase power to 130w at least and core +160 mem 570
should get u back to 28.....if u want more.... increase power.....

Digital_Seytan

jr. member

Activity: 222

Merit: 2

[email protected]

Quote from: j2james on December 16, 2020, 11:51:51 AM

Hi All. Some days I have the following problem.

All my cards ignore any values of memory clock (MC) overckloking (CC and PL changes work correct). All the time I use MSI AB. I tried to use PM overclocking params, but result is the same.

My mining speed has decreased from 180 to 128. Please help!

--------------------------
6 * ROG STRIX-GTX1070-O8G-GAMING, Win 7 Home Extended, 8GB RAM

It is and remains a problem with the gtx 8gb cards with phoenixminer as an alternative you may also be able to use Trexminer which does better, unfortunately better instead of ethereum ETC mining much higher hashrate and much lower energy use

j2james

newbie

Activity: 80

Merit: 0

Hi All. Some days I have the following problem.

All my cards ignore any values of memory clock (MC) overckloking (CC and PL changes work correct). All the time I use MSI AB. I tried to use PM overclocking params, but result is the same.

My mining speed has decreased from 180 to 128. Please help!

--------------------------
6 * ROG STRIX-GTX1070-O8G-GAMING, Win 7 Home Extended, 8GB RAM

PM 5.3b with the following config:
-nvidia
-cdm 2
-cdmport 3333
-cdmpass xxxxxxx
-minRigSpeed 120
-rmode 2
-tstop 70
-tstart 40
-logsmaxsize 0
-nvf 2
-hstats 2

KiparisD

full member

Activity: 323

Merit: 101

Quote from: msrti on December 16, 2020, 08:49:28 AM

Quote from: Cryptomining2003 on December 16, 2020, 08:26:11 AM

Quote from: msrti on December 16, 2020, 07:59:04 AM

Hi. I have RX5700xt GPUs.Is "-eres 0" better for avoiding crashes in phoenix miner? Or higher numbers like 2(default) is better for reducing crashes?

If you expect crashes when switching epochs, give the -lidag option a try and choose slowest, use together with -gser 2

my 5700 didnt crash so far

thanks. I've already tried -lidag 1 and had better stability I will also try -gser 2 with it. but won't it decrease the mining speed?

Nope, it only affects DAG creation speed, hashrate will be the same

msrti

newbie

Activity: 8

Merit: 0

Quote from: Cryptomining2003 on December 16, 2020, 08:26:11 AM

Quote from: msrti on December 16, 2020, 07:59:04 AM

Hi. I have RX5700xt GPUs.Is "-eres 0" better for avoiding crashes in phoenix miner? Or higher numbers like 2(default) is better for reducing crashes?

If you expect crashes when switching epochs, give the -lidag option a try and choose slowest, use together with -gser 2

my 5700 didnt crash so far

thanks. I've already tried -lidag 1 and had better stability I will also try -gser 2 with it. but won't it decrease the mining speed?

Cryptomining2003

newbie

Activity: 64

Merit: 0

Quote from: msrti on December 16, 2020, 07:59:04 AM

Hi. I have RX5700xt GPUs.Is "-eres 0" better for avoiding crashes in phoenix miner? Or higher numbers like 2(default) is better for reducing crashes?

If you expect crashes when switching epochs, give the -lidag option a try and choose slowest, use together with -gser 2

my 5700 didnt crash so far

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 168. (Read 785074 times)