PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 170.

miner29

full member

Activity: 1275

Merit: 141

Quote from: duplj30 on December 15, 2020, 03:09:06 PM

Quote from: ?? on ??

Quote from: duplj30 on December 15, 2020, 11:53:59 AM

Quote from: DejavuUS on December 15, 2020, 11:46:41 AM

Is PhoenixMiner 5.4b legit, I dont see it mentioned here and when I downloaded it from the github page windows deleted a virus "Contebrew.A!ml" in the Phoenixminer.exe file Is this normal?

just above the link to mega.nz, download from there

Thanks for that, my point exactly is on the MEGA URL there is no 5.4b and there is one here ***

https://bitcointalksearch.org/topic/m.55807925
on page 332 in the middle

Sorry duplj30 tagged you trying to get rid of the fraudulent github link that DejavuUS posted. Have deleted and corrected as well as sent note to mods. I see we have all but one link left to remove. Thanks and again sorry for quoting your message as fraudulent.

miner29

full member

Activity: 1275

Merit: 141

Quote from: oklickmanworld on December 15, 2020, 05:48:21 PM

how to use PhoenixMiner command in ethOS Huh

Go to your web monitoring page and click the link on it to:

https://github.com/cynixx3/third-party-miner-installer-for-ethos

Then scroll down and execute these two commands:

sudo wget https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager -O /usr/bin/miner-manager

sudo chmod +x /usr/bin/miner-manager

Then simply type:

miner-manager phoenixminer install

After it installs edit you local.conf or remote.conf so that:

globalminer phoenixminer
phoenixminer=flags -mode 1

(You can add any supported command line options to the flags such as - mode 1 -proto 3 -wdtimeout 300

This also adds support for a lot of miners....you can only have one installed at a time but makes it easy to install most miners

oklickmanworld

newbie

Activity: 17

Merit: 0

how to use PhoenixMiner command in ethOS Huh

18-Terahash

newbie

Activity: 29

Merit: 0

Might be a dumb question, but with PM do you have to increase the power to get better hashrates out of the 1070s or can you keep it at 70% and still achieve a good hashrate?

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: PepsiCoin88 on December 15, 2020, 05:23:58 PM

Quote from: ninenep89 on December 15, 2020, 05:21:30 PM

Hi, tell me how to restart the system after it gave an error and asks you to press any key

command -Rmode

Wink

and reboot.bat
shutdown /r /t 10 /f

PepsiCoin88

newbie

Activity: 13

Merit: 0

Quote from: ninenep89 on December 15, 2020, 05:21:30 PM

Hi, tell me how to restart the system after it gave an error and asks you to press any key

command -Rmode

Wink

ninenep89

newbie

Activity: 4

Merit: 0

Hi, tell me how to restart the system after it gave an error and asks you to press any key

miner1987

newbie

Activity: 18

Merit: 0

Quote from: PepsiCoin88 on December 15, 2020, 05:12:41 PM

Help reduce the intensity of this stove!
(latest version)
Vidyakha ancient Greek radeon 290, how many-mi do not put, still 94C and trottling! -gt how much is optimal??

-mi 0

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: PepsiCoin88 on December 15, 2020, 05:12:41 PM

Help reduce the intensity of this stove!
(latest version)
Vidyakha ancient Greek radeon 290, how many-mi do not put, still 94C and trottling! -gt how much is optimal??

you can try to lower your mining intensity with -mi 10, or 9 or even lower

PepsiCoin88

newbie

Activity: 13

Merit: 0

Help reduce the intensity of this stove!
(latest version)
Vidyakha ancient Greek radeon 290, how many-mi do not put, still 94C and trottling! -gt how much is optimal??

bit-sokol

newbie

Activity: 48

Merit: 0

Hi,
I have 6 amd 580 in rig, the problem is only "-mt 1" is working but gives low hashrate with PhoenixMiner 5.3b compare with straps in claymore. As i understand there is not more timing to choose? "-straps" is for nvidia only?

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -wal 0x2ab85c8dbaee539e4ee76d93cfcd85daf688fd29.Rig001 -mt 1 -cclock 1150,1200,1200 -mclock 2080,2100,2100 -cvddc 990,1050,1050

win10
20.4.2 drivers

Nasareth

newbie

Activity: 4

Merit: 0

Quote from: adaseb on December 13, 2020, 12:46:41 AM

Quote from: Nasareth on December 12, 2020, 03:22:42 PM

Hi all I am New in this Forum Very Helpfull Forum Sry for my english it is not Good.
Dear PhoenixMiner Need your Help I have one Ring With 4 Gpu 2 RX 570 4GB & 2 RX 570 8 GB.
2 gpu Rx 570 4 gb before some days have 27-28MHs Now have 19Mhs Already Check
With PhoenixMiner_5.4b , PhoenixMiner_5.2a , PhoenixMiner_5.2b , PhoenixMiner_5.2c , PhoenixMiner_5.2e With AMD driver 20.5.1 All Have Enable Compute Mode

My Line is This Have Something Wrong ?
PhoenixMiner.exe -pool ssl://eth-eu1.nanopool.org:9433 -wal (HIDE) -amd -gt 15 -amd -rmode 2 -clkernel 1,3,3,1 -rxboost 1 -eres 0,2,2,0 -dagrestart 1 -daglim 1 -rvram -1,384,384,-1 -tt 53 -tstop 75

Already Use PhoenixMiner_5.2e With AMD driver 20.5.1
Eth speed: 101.053 MH/s, shares: 1/0/0, time: 0:01
main GPUs: 1: 19.430 MH/s (0) 2: 30.038 MH/s (0) 3: 32.162 MH/s (0) 4: 19.423 MH/s (1)
My Results Have any opinion Please For Fix 2 Cards Again to go to 27-28 Mhs?
Thanks A lot Guys Have A nice to meet you all...

It’s because your 4GB are reaching the dag limit on ETH. Basically you have 2 more days on epoch 381 and when epoch 382 will start they will no longer be able to mine at all. There is another miner that if you search lets you mine for another month or two but I don’t want to mention in this thread since it’s not phoenixminer specific.

I would just however remove those 2 GPUs from the rig and sell them on Craigslist. Then add some money and buy an 8gb version and you will get your 30mhs speed back. Nothing else to do. You can mine etc at half the profit however I don’t think you want to do that.

Dear adaseb Can you check your pm pls ?

duplj30

newbie

Activity: 18

Merit: 0

Quote from: ?? on ??

Quote from: duplj30 on December 15, 2020, 11:53:59 AM

Quote from: DejavuUS on December 15, 2020, 11:46:41 AM

Is PhoenixMiner 5.4b legit, I dont see it mentioned here and when I downloaded it from the github page windows deleted a virus "Contebrew.A!ml" in the Phoenixminer.exe file Is this normal?

just above the link to mega.nz, download from there

Thanks for that, my point exactly is on the MEGA URL there is no 5.4b and there is one here ***

https://bitcointalksearch.org/topic/m.55807925
on page 332 in the middle

Jonet

jr. member

Activity: 82

Merit: 3

One of my rigs keep complaining that "debugger detected" and stops. It can run for days but now and then it will get paranoid and stop. Windows 10.

miner29

full member

Activity: 1275

Merit: 141

Quote from: ?? on ??

Quote from: duplj30 on December 15, 2020, 11:53:59 AM

Quote from: DejavuUS on December 15, 2020, 11:46:41 AM

Is PhoenixMiner 5.4b legit, I dont see it mentioned here and when I downloaded it from the github page windows deleted a virus "Contebrew.A!ml" in the Phoenixminer.exe file Is this normal?

just above the link to mega.nz, download from there

Thanks for that, my point exactly is on the MEGA URL there is no 5.4b and there is one here FAKE GITHUB URL CLEANSED//github.com/ThePhoenixMiner/PhoenixMiner/releases

On Dec 2nd in this thread PhoenixMiner stated :

We do not have GitHub, and phoenixminer.org has nothing to do with us

So if you are using the github it is not to be trusted.
Here is link where Phoenixminer himself states this....

https://bitcointalksearch.org/topic/m.55731982

trung297

newbie

Activity: 13

Merit: 0

Quote from: miner29 on December 15, 2020, 12:14:23 PM

Quote from: trung297 on December 15, 2020, 12:02:01 PM

Hello all, I got this problem. Any advise? Please. Thank you

phoenix miner is not recognized as an internal or external command

You may not have it installed.
You may not be in the right directory to execute it. If not move to the correct directory.
If you are running windows then you may need to add it to the exclude list for software so defender doesnt stop it from running.

More details would help.

Thank you for your reply. This is my step.
1/downloaded file from Mega Folder.
2/Move the downloaded file to desktop and 7zip it to Desktop
3/Change the wallet and run with ethermine bat with admin but it gives me those error. I want to add it to Shell:startup.

Not sure if i missed any steps.

devivier

newbie

Activity: 36

Merit: 0

dear me the nmvl.dll is here C: \ Windows \ System32 \ DriverStore \ FileRepository \ nv_dispi.inf_amd64_8dccece3a1276290

new driver 460.89
does not work either and most of the other miners also

Seph213

member

Activity: 124

Merit: 13

Quote from: Deafran on December 14, 2020, 10:48:34 PM

Quote from: Seph213 on December 14, 2020, 03:04:26 PM

Been mining for years with my 1070 using ethminer, then 3 days ago i switched over to pheonixminer .

With ethminer my core clock use would be very low and mem high .

With phoenixminer my core clock is actually being used along with mem , i almost look these same as when i’m gaming

Is that normal ? Is everyone else running 1070’s notice that ?

may i know your OS ??

Windows 10 pro.

miner29

full member

Activity: 1275

Merit: 141

Quote from: trung297 on December 15, 2020, 12:02:01 PM

Hello all, I got this problem. Any advise? Please. Thank you

phoenix miner is not recognized as an internal or external command

You may not have it installed.
You may not be in the right directory to execute it. If not move to the correct directory.
If you are running windows then you may need to add it to the exclude list for software so defender doesnt stop it from running.

More details would help.

trung297

newbie

Activity: 13

Merit: 0

Hello all, I got this problem. Any advise? Please. Thank you

phoenix miner is not recognized as an internal or external command

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 170. (Read 784857 times)