Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 167. (Read 784965 times)

Hello everyone,  if you can help me; merci beaucoup !

I tried everything i could think of but i guess i'm really bad with this stuff.
I have a rig 6x580 which works perfectly but i can't seem to make my NVIDIA 1070 mine on my gaming pc.
Anyone has an idea for me ?

I thought it was Windows defender (which i disabled and/or added an exception)
Then i thought it was the driver thingy (explained on the front page) did all the steps and still miner doesnt start.
I have a feeling it's a dumb mistake on my part, any one has a clue ?
(Raised virtual memory to 36k, just in case) nada..

Here is where i get stuck:
---------------------------------------

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_FORCE_64BIT_PTR 0

SUCCESS: Specified value was saved.

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_HEAP_SIZE 100

SUCCESS: Specified value was saved.

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_USE_SYNC_OBJECTS 1

SUCCESS: Specified value was saved.

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_SINGLE_ALLOC_PERCENT 100

SUCCESS: Specified value was saved.

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>PhoenixMiner.exe -pool eu1.ethermine.org:14444 -pool2 us1.ethermine.org:14444 -wal 0x8F5114f9E496d35fb155cD1B1Fd43aF592e554ed.TinyMiner2 -proto 2 -nvidia -eres 0 -daglim 1
Phoenix Miner 5.3b Windows/msvc - Release build
-----------------------------------------------

CUDA version: 11.0, CUDA runtime: 8.0
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs

C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>pause
Press any key to continue . . .

---------------------------------------------------------------------------------------

What am i forgetting..jeez.
Thanks for any input

Good advise(I had changed the riser on the wrong card I believe) Just got linux up and running.  I have the problem diagnosed down to 2 cards now as I realized that linux does not see the cards the same as windows....

How do I relate PM's gpu number IE(1,2,3,4 etc) to the physical card?  I tried stopping the card etc but the fans seem to always run under linux...Any ideas?

Thanks

Hello,

No workaround yet for Nvidia 1070? from 32-33 the speed dropped to 25-26.
I remember years ago when we started with this mining it was an issue for AMD cards but still RX 580 performance is ~ 30-31, way better than Nvidia .

Thanks

WHY lolminer is giving better hashrate on ETH with 4G card
phoenix 202 mh
lolminer 222
large difference

also check all the connectors for the PSU for the pci-e connectors.  you might have one going bad...i.e. connectors melting, breaking from continuous use... i.e. wear and tear.

A motherboard problem seems likely or possibly a bad card shorting out the PCIe bus.
Test one card at a time in each slot. Anything that changes the problem is suspect.
It could be just one slot in which case you could skip that slot if you don't want to buy
a new motherboard yet.

Ubuntu 20.4 Server AMDpro 20.30 Rx570 4gb

I am having issues with one of my miners.(other miner is same cards)  Some of the cards I cannot use as I receive constant errors and when mining I get a few of the same errors here and there. I tried swapping risers and am suspecting maybe a motherboard issue.   The error is:

pcieport 0000:00:1b.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (TransmitterID)
pcieport 0000:00:1b.2: AER:   device [8086:a29a] error status/mask=00001000/00002000
pcieport 0000:00:1b.2: AER:   [12] Timeout

On the cards that will not work its a screen full of this then eventually a screen full of:

[drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125

Any ideas?

Thanks

Hi there.
Having some problems with my RIG (2x rx580 NITRO + 8GB with PhoenixMiner 5.3b Windows)
Recently started my RIG again, update the drivers to 19.7.5.

The problem is sometimes at startup one GPU get lower hashrate, like 6mh/s, the other one gets normal speeds. What I think is the time to update DAG file in each GPU, one of them get to 100% first. I get 63~64mh/s when both get to start well.
Someone have a solution for this?

Image attatch https://imgur.com/W187TrN

Yes, hashrate is the same on pool (2miners)

You have to see if that translates to that hashrate at the pool.

I try this, but same speed as on AB, changing memory clock don't increase mining speed. I tested this in my pc. I have 1x 1070 zotac. I rig i have 2x 1060 and 2x 1070, hashrate is smaller then claymore.

Same technique here.
I start miner for DAG with +1000

And then +1500 with PL55% on my 2 3060ti's

Result here : 130W, 62.7 mhs
Can't get any higher.
I'm satisfied enough though with this

Now the CUDA version is 11.2. The problem of overclocking before the formation of the dag is the same for all miners. and if the dag is changed, then the 3060/3070 cards will give out rejects.

Я aбcoлютнo yвepeн в cкaзaннoм. Я тecтиpyю мaйнepы нa кapтax 3060ti/3070/3080. ocoбeннo зaмeтнa paзницa нa 3080. Oни пoтpeбляют oщyтимo мeньшe нa тoм жe nbminer. Ecли включить фeникc c тeми жe нacтpoйкaми, нa кoтopыx иcпoльзoвaлcя nbminer, тo oн бyдeт выдaвaть нa 3-4mh/s мeншe c 3080. Пpидeтcя пoднять PL для дocтижeния близкoгo жe xeшpeйтa.

I am Absolutely sure of what has been said. I'm testing manners on 3060ti/3070/3080 cards. the difference at 3080 is particularly noticeable. they consume significantly less on the same nbminer. If you enable Phoenix with the same settings that nbminer was used on, it will output 3-4mh/s less from 3080. You will have to raise the PL to achieve a close hashrate.

My updated config is the following:

-nvidia
-cdm 2
-cdmport 3333
-cdmpass xxxxxxx
-minRigSpeed 170
-rmode 2
-tstop 70
-tstart 40
-logsmaxsize 0
-nvf 2
-hstats 2
-eres 0
-powlim -15
-cclock 1:+70,2-6:+102
-mclock +340,+400,+350,+450,+350,+350

In AB I reseted to default all values and use AB only to control fan speed with manually defined curve (unfortunatelly PM does not provide that functionality), PL, CC and MC are defined in PM config. Try to do the same. Also (not sure you need it) I increased swap file from 65536Mb to 131072Mb.

Pay attention on eres parameter.

I have the same problem on my 3060ti with 460.79, so I rollback to 457.51 driver.

I have gtx 1070 and not working, use afterburner and increase memory clock don't increase mining speed.

Are you sure of this ? I get exactly the same hashrate with t-rex latest or phoenix with my 3060ti

Yeah. I'm having the same issue with my RTX 3080. Just from reading through the last couple of pages of comments it sounds like it has something to do with the 460.79 GeForce driver for Cyberpunk but I don't have conformation yet.

nvml.dll fix didn't work for me.

This is for people using Phoenix miner and their GPU for mining.

No CPU mining involved