PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 169.

Jonet

jr. member

Activity: 82

Merit: 3

Quote from: Jonet on December 15, 2020, 01:20:11 PM

One of my rigs keep complaining that "debugger detected" and stops. It can run for days but now and then it will get paranoid and stop. Windows 10.

in order to solve the issue, you have to specify in the batch arguments which architecture you are using. Example -NVidia (I am using a 1060 6GB) Happy Mining!

Have added -amd but the problem is still there. Is it Windows Defender that is causing this problem? I'll turn off real time protection and se how it goes.

jorko80

newbie

Activity: 3

Merit: 0

Quote from: ManuBBXX on December 16, 2020, 04:34:58 AM

Quote from: jorko80 on December 16, 2020, 03:54:05 AM

Dear Mr.Phoenix , I have problems mining with 3060ti cards. Whenever I start the miner with an applied OC profile - it's getting only incorrect shares. I have to start it with default settings for the cards and apply OC later. It's especially frustrating when the DAG epoch changes, because that leads to new DAG generation with OC already applied and incorrect shares. Lost hours of work last night. Please address the issue. Thank you!

I don't have this kind of problem with my MSI trioX 3060TI
I start mining with a +1200mhz mem applied, and all goes well, no incorrect shares

I receive today my second 3060ti (Aorus ), will try with and let you informed.
Hard to grab those cards anyway Cheesy

I have two Zotac Twin Edge and two MSI Ventus on two different PCs and the problem is present. This is on Windows, maybe you mine on a different OS?

Definitely hard to grab, spent days searching

ManuBBXX

full member

Activity: 839

Merit: 100

Quote from: jorko80 on December 16, 2020, 03:54:05 AM

Dear Mr.Phoenix , I have problems mining with 3060ti cards. Whenever I start the miner with an applied OC profile - it's getting only incorrect shares. I have to start it with default settings for the cards and apply OC later. It's especially frustrating when the DAG epoch changes, because that leads to new DAG generation with OC already applied and incorrect shares. Lost hours of work last night. Please address the issue. Thank you!

I don't have this kind of problem with my MSI trioX 3060TI
I start mining with a +1200mhz mem applied, and all goes well, no incorrect shares

I receive today my second 3060ti (Aorus ), will try with and let you informed.
Hard to grab those cards anyway Cheesy

Gpumanijak

newbie

Activity: 18

Merit: 0

Dear Mr.Phoenix, Hawaii card r9 390 8gb doesn't work on hiveos with phoenixminer 5.4b when trying to mine Ethereum... Will you modify kernel to fix this ? ty

jorko80

newbie

Activity: 3

Merit: 0

Dear Mr.Phoenix , I have problems mining with 3060ti cards. Whenever I start the miner with an applied OC profile - it's getting only incorrect shares. I have to start it with default settings for the cards and apply OC later. It's especially frustrating when the DAG epoch changes, because that leads to new DAG generation with OC already applied and incorrect shares. Lost hours of work last night. Please address the issue. Thank you!

Andor9505

newbie

Activity: 17

Merit: 0

Slowly, it is no longer possible to mine ETH with a 4-gb card.

bategojko74

member

Activity: 220

Merit: 12

Quote from: ?? on ??

Quote from: DooGZ on December 15, 2020, 06:32:48 PM

2 of my 4gb Polaris card hash rate went down another 2mhs today, -4mhs total, hash rate started to go down 2 or 3 weeks ago.

from 30mhs, current is 27mhs
From 28mhs, current is 24mhs.

Use -daglimit 4080
Experiment with the value '4080' to achieve max hashrate.

stonetown

newbie

Activity: 3

Merit: 0

I have moved from Windows to Linux and would like miner to control nvidia HW (voltage,clock,fan). It seems it it ignores all configuration settings.
Ubuntu server 18.04.5 LTS HWE
kernel: 5.4.0-58
nvidia driver 390.138
GPU GeForce GTX 1070
miner: PhoenixMiner_5.3b_Linux

/PhoenixMiner_5.3b_Linux$ sudo /home/miner/PhoenixMiner_5.3b_Linux/PhoenixMiner -pool us2.ethermine.org:4444 -wal XXXXX -tt 60 -hstats 2 -cclock +100 -mclock +100 -powlim -10
[sudo] password for miner:
Phoenix Miner 5.3b Linux/gcc - Release build
--------------------------------------------

CUDA version: 9.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 2), CUDA cap. 6.1, 7.9 GB VRAM, 15 CUs
Nvidia driver version: 390.138
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: us2.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool us2.ethermine.org:4444 (proto: EthProxy)
GPU1: 46C 0% 20W
GPU1: cclock 227 MHz, mclock 4004 MHz, p-state P0, pcap power
GPUs power: 19.9 W
Eth: Connected to ethash pool us2.ethermine.org:4444 (172.65.226.101)
..................................

Eth: New job #d83b007d from us2.ethermine.org:4444; diff: 4000MH
Eth: New job #b356993c from us2.ethermine.org:4444; diff: 4000MH
Eth speed: 26.973 MH/s, shares: 0/0/0, time: 0:02
GPU1: 66C 41% 135W
GPU1: cclock 1898 MHz, mclock 3802 MHz, p-state P2, pcap no
GPUs power: 135.0 W

As you can see the GPU and memory clock the same, no fan control and no power limit. Am I missing something?. What am I doing wrong? something I should enable to allow miner to control nvidia HW parameters?
Any advice would be really appreciated. Thanks

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: jgonzi on December 15, 2020, 07:25:50 PM

If you want to still have the same hashrate, I prove it lolMiner with --4g-alloc-size 4080, 4more days of full hashrate

I just tested and it works on lolminer, it does not work on PhoenixMiner, I wonder why.

PhoenixMiner said there is a zombie mode on PhoenixMiner but no examples were given, does anybody know how zombie mode works on PhoenixMiner? any example of a command line?

jgonzi

member

Activity: 639

Merit: 19

Quote from: DooGZ on December 15, 2020, 06:32:48 PM

2 of my 4gb Polaris card hash rate went down another 2mhs today, -4mhs total, hash rate started to go down 2 or 3 weeks ago.

from 30mhs, current is 27mhs
From 28mhs, current is 24mhs.

If you want to still have the same hashrate, I prove it lolMiner with --4g-alloc-size 4080, 4more days of full hashrate

DooGZ

newbie

Activity: 12

Merit: 0

2 of my 4gb Polaris card hash rate went down another 2mhs today, -4mhs total, hash rate started to go down 2 or 3 weeks ago.

from 30mhs, current is 27mhs
From 28mhs, current is 24mhs.

Baldezh2016

newbie

Activity: 22

Merit: 0

Quote from: Dripac on December 15, 2020, 05:38:19 PM

I dont see 5.4b miner on mega link....

Why these updates? Everything works on all my rigs except Nvidia 460.79.
I will wait for the addition of large epochs for the DAG file, then I will update.
Happy Holidays everyone! Cheesy

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: Dripac on December 15, 2020, 05:56:15 PM

Quote from: bit-sokol on December 15, 2020, 05:45:02 PM

Quote from: Dripac on December 15, 2020, 05:38:19 PM

I dont see 5.4b miner on mega link....

5.4b is not in the first post because it is a beta version. I have provided a quote @PhoenixMiner where you can download beta 5.4b.

Sorry but i dont see that... Maybe im blind but i dont see that link for 5.4b

look for the post from December 12

Quote from: PhoenixMiner on December 12, 2020, 01:52:14 AM

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

https://mega.nz/folder/OJ9BCYaD#osOU-PywjweHqQkux8rpbQ (MEGA)

Dripac

newbie

Activity: 71

Merit: 0

Quote from: bit-sokol on December 15, 2020, 05:45:02 PM

Quote from: Dripac on December 15, 2020, 05:38:19 PM

I dont see 5.4b miner on mega link....

5.4b is not in the first post because it is a beta version. I have provided a quote @PhoenixMiner where you can download beta 5.4b.

Sorry but i dont see that... Maybe im blind but i dont see that link for 5.4b

18-Terahash

newbie

Activity: 29

Merit: 0

But why mine when cyberpunk is out? Cool

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: Dripac on December 15, 2020, 05:38:19 PM

I dont see 5.4b miner on mega link....

5.4b is not in the first post because it is a beta version. I have provided a quote @PhoenixMiner where you can download beta 5.4b.

Dripac

newbie

Activity: 71

Merit: 0

I dont see 5.4b miner on mega link....

bit-sokol

newbie

Activity: 48

Merit: 0

Quote from: Dripac on December 15, 2020, 05:32:21 PM

@PhoenixMiner where i can download latest 5.4b miner?

Quote from: PhoenixMiner on December 12, 2020, 01:52:14 AM

The new beta version is ready. You can download PhoenixMiner 5.4b from here:

https://mega.nz/folder/OJ9BCYaD#osOU-PywjweHqQkux8rpbQ (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):

Code:

File: PhoenixMiner_5.4b_Windows.zip
===================================
SHA-1: 6a42d27493062ddcef6f2a12a348c6d4b68f65ce
SHA-256: 53a5210e004ffa3fae3c3378004d1d369c21227e5e800f849a6c8e354fd7ca2c
SHA-512: 6404648e6a6e5e3ef624ad6038351eb712ba3810070b4307557f42394e25e18d5d6e7760e472d3b17e286e23139ab573d444a0c900ac1c018374f8d25d3c6852

File: PhoenixMiner_5.4b_Linux.tar.gz
====================================
SHA-1: 434d3a9922a7ddc3f65d341cc7630032995e1e23
SHA-256: a5f612dd151d06b9a1144a911d2ca1b351bb385dfc73fbd44888af24a2cf1122
SHA-512: 98c4c09fe4bc144412a87eef506514d8cca9c8db9ba4acb95ec71ea7100969cc2411224175454d456b89184cc451a0bbaf5d60202d910aaba8c9e1cd1e15635e

File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The new features in this release are:

New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4b.

https://bitcointalksearch.org/topic/m.55807925

Dripac

newbie

Activity: 71

Merit: 0

@PhoenixMiner where i can download latest 5.4b miner?

miner1987

newbie

Activity: 18

Merit: 0

Why I can't mine on Nvidia 460.79 drivers Huh

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 169. (Read 784965 times)