PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 259.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: ?? on ??

dev promised to correct the hashrate in the new version.
At the moment, version 1.1.0 has been released, with fixes and updated code

Devil right? because only the devil wants your backdoor. I would never touch it and for the record as this is a hobby for me, I did not even download it because I knew this was a trojan, when something is too good to be true, dont even get close to it ehhe

Iamtutut

full member

Activity: 1120

Merit: 131

Quote from: Slyz on August 01, 2020, 01:41:21 AM

Quote from: KiparisD on July 31, 2020, 08:35:32 AM

Quote from: Slyz on July 31, 2020, 07:51:15 AM

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

Short story answer is use Claymore Cool

I was using it for 3+ years, but 2days ago 4gb 580 and 570 sapphire stop working, not enough memory to create dag.
I still have working 4gb rigs on Claymore, but if i stop them, and restart only miner, it will not create DAG again,

Do u have solution for working 4gb rigs with Claymore? I have enabled IGPU, -eres 0 or 1 dont work anymore...

so...

so i tryed Phoenix, and it works...for 4GB - but even when i dont put any command line in miner_start (not even -tt), the new drivers are in control of my fan speed (but it doesnt works fine, 'cos all GPU temp's are 75c°)
Ill try to put fixed min and maxed speed lines for fan speed, maybe that will work...

or if anyone have better solution i'm listening

I currently have 3 RX574 on Nicehash with phoenix 5.0b. Win 10, drivers are 20.4.2. Nothing special in my bat file (very basic). My display GPU is a 5600XT, so I'm not bothered in this area.

Fans of the 574s are controled by the AMD memory tool (not the XL version), they're working just fine.

Dunno if that may help you.

Iamtutut

full member

Activity: 1120

Merit: 131

Quote from: ?? on ??

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 68-75 mh/s
RX5700 XT - 73 mh/s

More info: https://github.com/ethpillan/PillForETH/releases/tag/1.0.0

I advise anyone to NOT try this.

The Vega 64 has a larger mem bandwith than the 5700XT and can by no mean reach 60MH/s.

mollov

newbie

Activity: 7

Merit: 0

Quote from: mollov on July 31, 2020, 01:32:15 PM

Current ETC epoch is 363, and for the ETH it's 352... mining on Nicehash Platform...

.................................

Why there is such a difference between the reported allocated DAG memory and the actual memory allocated? If I drop the miner, every card is using just 8MB for.... whatever.... why the difference when the miner is working?

I don't see how the Phoenix Miner will be able to mine under Windows until epoch 370+....

OK, i did some benchmarks.... it will run until epoc 368 (miner allocated memory is 3.88GB, AfterBurner reported memory is 4012MB), included... 369 is a no go... is this a driver issue, so some other driver version might take less VRAM and allow going to epoch 370+?

I know Linux is a possible option, but want to stay on Win as long as possible...

Slyz

newbie

Activity: 3

Merit: 0

Quote from: KiparisD on July 31, 2020, 08:35:32 AM

Quote from: Slyz on July 31, 2020, 07:51:15 AM

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

Short story answer is use Claymore Cool

I was using it for 3+ years, but 2days ago 4gb 580 and 570 sapphire stop working, not enough memory to create dag.
I still have working 4gb rigs on Claymore, but if i stop them, and restart only miner, it will not create DAG again,

Do u have solution for working 4gb rigs with Claymore? I have enabled IGPU, -eres 0 or 1 dont work anymore...

so...

so i tryed Phoenix, and it works...for 4GB - but even when i dont put any command line in miner_start (not even -tt), the new drivers are in control of my fan speed (but it doesnt works fine, 'cos all GPU temp's are 75c°)
Ill try to put fixed min and maxed speed lines for fan speed, maybe that will work...

or if anyone have better solution i'm listening

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: commandera on July 31, 2020, 09:45:10 PM

PhoenixMiner is 0.65% and Ethermine 1% fees
A simple question that I need to answer.
there additional fees \ cost when I use SSL connection by PhoenixMiner ?

no.

commandera

member

Activity: 243

Merit: 71

PhoenixMiner is 0.65% and Ethermine 1% fees
A simple question that I need to answer.
there additional fees \ cost when I use SSL connection by PhoenixMiner ?

patthara74

newbie

Activity: 14

Merit: 0

Got a problem when use in SMOS, I set core clock at 1120 but some rigs only down to 1167 or else.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Slyz on July 31, 2020, 07:51:15 AM

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

if you use -tt Target Temperature it enables the fan control to hold this temp and earlier it was the same way fan control worked in the driver however new(after version 19 or so) amd drivers have a new way of controlling the fans now. so...
just do not touch -tt param if you want to control the temps in ovdnt profiles, just make sure you see what the driver supports and use 0.2.8

mollov

newbie

Activity: 7

Merit: 0

I never said it's a Nicehash problem in the first place...

So... this is your answer to my question? You don't know me, let alone talking trash about me.... go fly a kite...

When you have nothing to say, why do you care showing it to everybody??

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: mollov on July 31, 2020, 01:32:15 PM

Current ETC epoch is 363, and for the ETH it's 352... mining on Nicehash Platform...

On a miner with 4GB cards (the monitor is connected to the integrated video) the Phoenix Miner reports that it can no longer create pre-allocation of the DAG because of not enough VRAM... that's on epoch 363... the miner allocates 3.83GB for the current ETC DAG (as Nicehash currently is supplying ETC hashes), on GPU-Z or AfterBurner it's 3972MB allocated...

Why there is such a difference between the reported allocated DAG memory and the actual memory allocated? If I drop the miner, every card is using just 8MB for.... whatever.... why the difference when the miner is working?

I don't see how the Phoenix Miner will be able to mine under Windows until epoch 370+....

It's not nicehash problem. It's physically limitted for 4Gb GPU. You have to admit that buying 4Gb cards was wrong solution between 4Gb and 8Gb cards! Soon all 4Gb cards would be throw it in the trash for mining.
Such small savings have led to so such problems...

mollov

newbie

Activity: 7

Merit: 0

Current ETC epoch is 363, and for the ETH it's 352... mining on Nicehash Platform...

On a miner with 4GB cards (the monitor is connected to the integrated video) the Phoenix Miner reports that it can no longer create pre-allocation of the DAG because of not enough VRAM... that's on epoch 363... the miner allocates 3.83GB for the current ETC DAG (as Nicehash currently is supplying ETC hashes), on GPU-Z or AfterBurner it's 3972MB allocated...

Why there is such a difference between the reported allocated DAG memory and the actual memory allocated? If I drop the miner, every card is using just 8MB for.... whatever.... why the difference when the miner is working?

I don't see how the Phoenix Miner will be able to mine under Windows until epoch 370+....

https://img.techpowerup.org/200731/dag-preallocation.jpg

BogdanCo

hero member

Activity: 729

Merit: 513

Quote from: caymanguy on July 31, 2020, 01:42:16 AM

Quote from: adrielmonteiro on July 30, 2020, 09:19:52 AM

can someone explain to me why the miner does not boot after a boot without a monitor connected to the motherboard? I have H110m for vh-plus, I can't solve this .. Cry

(opens the miner, but stops reading the DAG and only starts after connecting a monitor)

the problem is in the hardware

It's a general issue with the Gigabyte MB H110 chipset, a simple solution is to use a VGA dummy or switch to Linux.

Marvell2

full member

Activity: 1148

Merit: 132

this miner gives the best hash with my 5700 cards around 55 mhs at 1800 mem but its just too unstable
crashes the miner every day at least , team red is slower but 24 hrs now zero crash

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: KiparisD on July 31, 2020, 08:35:32 AM

Quote from: Slyz on July 31, 2020, 07:51:15 AM

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

Short story answer is use Claymore Cool

If you don't use any controls of PM, it doesn't change any hardware config. Check your command lines.
Claymore works the same way.

KiparisD

full member

Activity: 323

Merit: 101

Quote from: Slyz on July 31, 2020, 07:51:15 AM

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

Short story answer is use Claymore Cool

Slyz

newbie

Activity: 3

Merit: 0

Quote

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Thanks for answer mate, but looks like you didnt read my question?

I dont use overclocking and voltage controle via MINERS (ex. Claymore or Phoenix), i use it with OverDrivenTool and it works perfect for 3+ years.

My question was:

If i have only basic config in Phoenix miner, why does he control my fan speed and other overclocking settings? When i enter OverDrivenTools, the interface shows me current settings used by miner, and not the once i have choose.
I need help to turn this off, i want my miner cfg to be basic, only pool, wallet and worker name, other settings (Overclocking and etc) i will settup with OverDrivenTool, thats all

Also, I did read the readme file ofc, fast enough yeah, and one more time again, but probably will do it many times more

If u know the short story-answer, pls help.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Slyz on July 31, 2020, 04:57:03 AM

Hello, I need a little help with setting up a Phoenix miner.

I just switched from using a Claymore miner (3+ years) to Phoenix.

CFG:
win 10, IGPU enabled,
4 x sapphire 580 4gb, driver: 20.4.2
Phoenix.exe run as admin = yes, compute mode enabled.

Phoenix miner config:

Quote

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool europe1.ethereum.miningpoolhub.com:20536 -wal SlyMining.RIG_01 -pass x -proto 2 -amd -acm -rvram -1 -mode 1 -tt -70

1st question:

How to disable every hardware tweaking from miner? Im using OverDriven tools and my rigs are all good, stable working for weeks and when i start Phoenix miner the GPU temperature goes to 75c°
So this is why i put -tt 70, to fan work on 70% const.
But i want to everything be configurate from overdrivenTool.

In Claymore my GPU's was working on 50-55c° with 50-60% fan speed, and when Temp falls bellow 50c° fan goes to 0%, and again starts to cooling the gpu when temp goes higer. I was satisfy with this and is it possible to have it on Phoenix miner?

logfile:

Quote from: LOG

*** 0:56 *** 7/31 11:45 **************************************
Eth: Mining ETH on europe1.ethereum.miningpoolhub.com:20536 for 0:02
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU1: 61C 69% 80W, GPU2: 60C 69% 78W, GPU3: 60C 69% 86W, GPU4: 56C 69% 78W
GPUs power: 321.4 W
Current -gt 50,50,50,50

Options to control overclocking and overvoltage in PM is the same as in CM. F.e. -cclock -1200 -mclock 2000.
Just read the readme file on the PM miner folder.
Don't be lazy, read it. Mining does not tolerate laziness.
If you didn't place any options to control clocks and voltages, PM wouldn't touch these parameters at all.

Slyz

newbie

Activity: 3

Merit: 0

Hello, I need a little help with setting up a Phoenix miner.

I just switched from using a Claymore miner (3+ years) to Phoenix.

CFG:
win 10, IGPU enabled,
4 x sapphire 580 4gb, driver: 20.4.2
Phoenix.exe run as admin = yes, compute mode enabled.

Phoenix miner config:

Quote

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool europe1.ethereum.miningpoolhub.com:20536 -wal SlyMining.RIG_01 -pass x -proto 2 -amd -acm -rvram -1 -mode 1 -tt -70

1st question:

How to disable every hardware tweaking from miner? Im using OverDriven tools and my rigs are all good, stable working for weeks and when i start Phoenix miner the GPU temperature goes to 75c°
So this is why i put -tt 70, to fan work on 70% const.
But i want to everything be configurate from overdrivenTool.

In Claymore my GPU's was working on 50-55c° with 50-60% fan speed, and when Temp falls bellow 50c° fan goes to 0%, and again starts to cooling the gpu when temp goes higer. I was satisfy with this and is it possible to have it on Phoenix miner?

logfile:

Quote from: LOG

*** 0:56 *** 7/31 11:45 **************************************
Eth: Mining ETH on europe1.ethereum.miningpoolhub.com:20536 for 0:02
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 5), OpenCL 2.0, 4 GB VRAM, 36 CUs
GPU1: 61C 69% 80W, GPU2: 60C 69% 78W, GPU3: 60C 69% 86W, GPU4: 56C 69% 78W
GPUs power: 321.4 W
Current -gt 50,50,50,50

KiparisD

full member

Activity: 323

Merit: 101

Quote from: ?? on ??

Configured miner https://miningcoin.ru/novyj-majner-phoenix-miner-v-5-0e-dlja-nvidia-i-amd-poslednjaja-versija-majnera-skachat-s-nastrojkami/

No advertising allowed here, GTFO Wink

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 259. (Read 784965 times)