thx PhoenixMiner dev for this update & happy to see you back !
even tho I have no amd gpus so kind of useless for me. let's hope some improvements will come for nvidia gpus too at some time.
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 43. (Read 784985 times)
August 16, 2021, 02:20:16 PM
August 16, 2021, 11:41:03 AM
I think that clgreen work only up to some DAG number. Now I mine on DAG #434 (4.48Gb).
And I use latest 21.8.1 driver. Maybe clgreen works only on several set of drivers.
And I use latest 21.8.1 driver. Maybe clgreen works only on several set of drivers.
August 16, 2021, 11:32:45 AM
Thanks! Without clgreen speed faster? More power uses?
Actually there is not enough difference between having -clgreen on or off on either power or speed as I can tell.I have ran it for long periods both ways, no noticeable impact on money or power. But, the -clKernel 3 instead of -clKernel 1
immediately increased my hash rate as I mentioned earlier, not a lot, but I welcome any small improvements.
The AMD cards with Phoenix work unbelievably well. I never have a crash or anything negative. It just runs forever without any intervention.
It's a great miner. Hope you find your issue with the green setting but unless you get different results than I do I'm not sure you will see much gain.
Let me know if you get different results please.
August 16, 2021, 11:05:14 AM
Thanks! Without clgreen speed faster? More power uses?
August 16, 2021, 10:59:47 AM
I am highly pleased with the new 5.7b release.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Can you post starting of mining screen until DAG generated?Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
And please with clgreen option.
For me clgreen didn't work. Miner says that GPU0 ignores clgreen 1. I want to figure out why.
Code:
2021.08.16:10:45:13.214: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.16:10:45:13.214: main Cmd line:
2021.08.16:10:45:13.214: main config.txt: -pool ssl://us1-etc.ethermine.org:5555 -pool2 ssl://eu1-etc.ethermine.org:5555 -wal 0xfeXXXXXXXXXXXXX -wal2 0xfeXXXXXXXXXXXXX -worker Zilla-ETC-1 -worker2 Zilla-ETC-2 -coin etc -coin2 etc -rmode 2 -cclock 1275,1275,1275,1275,1275 -cvddc 945,955,945,945,945 -mclock 2155,2175,2170,2133,2149 -mvddc 955,955,955,955,955 -mi 14,14,14,14,14 -gt 14,14,14,13,13 -stales 1 -stales2 1 -fret 3 -ftimeout 600 -ptimeout 30 -retrydelay 5 -rate 1 -cdm 2 -cdmport 1234 -cdmpass password -cdmrs -amd -acm -clKernel 3,3,3,3,3 -clgreen 1,1,1,1,1 -clNew 1,1,1,1,1 -clf 2,2,2,2,2 -mode 1,1,1,1,1 -gbase 1 -minRigSpeed 140 -eres 2,2,2,2,2 -dagrestart 2 -lidag 1,1,1,1,1 -gser 0 -gpureset 0,0,0,0,0 -rvram -1 -wdog 1 -wdtimeout 60 -log 1 -logfile ETC_Log.txt -logdir c:\miners\phoenix\logs -logsmaxsize 200 -gswin 15 -gsi 15 -astats 1 -hwm 2 -hstats 2 -tt 65,65,65,65,65 -prate 0.05 -fanmin 25 -fanmax 80 -fcm 0 -tmax 0 -tstop 70 -tstart 50 -mt 0 -ttli 69 -vmr 48,48,48,48,48
2021.08.16:10:45:14.703: main OpenCL driver version: 20.4.x
2021.08.16:10:45:14.742: main Available GPUs for mining:
2021.08.16:10:45:14.742: main GPU1: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.16:10:45:14.742: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.16:10:45:14.742: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.16:10:45:14.742: main GPU4: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.16:10:45:14.742: main GPU5: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.16:10:45:14.742: main ADL library initialized
2021.08.16:10:45:15.927: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.16:10:45:15.927: main Eth: primary pool: ssl://us1-etc.ethermine.org:5555
2021.08.16:10:45:15.932: main Starting GPU mining
2021.08.16:10:45:15.932: main Matched GPU1 to ADL adapter index 0 (method 1)
2021.08.16:10:45:15.960: main GPU1: AMD driver 20.4.1
2021.08.16:10:45:15.960: main GPU1: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.16:10:45:15.960: main GPU1: using AMD driver ver 20.4.1
2021.08.16:10:45:15.960: main Matched GPU2 to ADL adapter index 24 (method 1)
2021.08.16:10:45:15.989: main GPU2: AMD driver 20.4.1
2021.08.16:10:45:15.989: main GPU2: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.16:10:45:15.990: main GPU2: using AMD driver ver 20.4.1
2021.08.16:10:45:15.990: main Matched GPU3 to ADL adapter index 32 (method 1)
2021.08.16:10:45:16.020: main GPU3: AMD driver 20.4.1
2021.08.16:10:45:16.020: main GPU3: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.16:10:45:16.020: main GPU3: using AMD driver ver 20.4.1
2021.08.16:10:45:16.020: main Matched GPU4 to ADL adapter index 8 (method 1)
2021.08.16:10:45:16.049: main GPU4: AMD driver 20.4.1
2021.08.16:10:45:16.049: main GPU4: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.16:10:45:16.049: main GPU4: using AMD driver ver 20.4.1
2021.08.16:10:45:16.049: main Matched GPU5 to ADL adapter index 16 (method 1)
2021.08.16:10:45:16.077: main GPU5: AMD driver 20.4.1
2021.08.16:10:45:16.077: main GPU5: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.16:10:45:16.077: main GPU5: using AMD driver ver 20.4.1
2021.08.16:10:45:16.162: hwmc GPU1: switching to alt fan control mode
2021.08.16:10:45:16.167: hwmc GPU1: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.16:10:45:16.168: hwmc GPU1: setting zero RPM to 0
2021.08.16:10:45:16.178: hwmc GPU1: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.16:10:45:16.183: hwmc GPU1: set VMEM clocks to 2155 MHz (Vddc 955 mV)
2021.08.16:10:45:16.183: hwmc GPU2: switching to alt fan control mode
2021.08.16:10:45:16.184: hwmc GPU2: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.16:10:45:16.184: hwmc GPU2: setting zero RPM to 0
2021.08.16:10:45:16.192: hwmc GPU2: set GPU clocks to 1275 MHz (Vddc 955 mV)
2021.08.16:10:45:16.197: hwmc GPU2: set VMEM clocks to 2175 MHz (Vddc 955 mV)
2021.08.16:10:45:16.197: hwmc GPU3: switching to alt fan control mode
2021.08.16:10:45:16.197: hwmc GPU3: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.16:10:45:16.198: hwmc GPU3: setting zero RPM to 0
2021.08.16:10:45:16.205: hwmc GPU3: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.16:10:45:16.209: hwmc GPU3: set VMEM clocks to 2170 MHz (Vddc 955 mV)
2021.08.16:10:45:16.209: hwmc GPU4: switching to alt fan control mode
2021.08.16:10:45:16.210: hwmc GPU4: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.16:10:45:16.210: hwmc GPU4: setting zero RPM to 0
2021.08.16:10:45:16.216: hwmc GPU4: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.16:10:45:16.223: hwmc GPU4: set VMEM clocks to 2133 MHz (Vddc 955 mV)
2021.08.16:10:45:16.223: hwmc GPU5: switching to alt fan control mode
2021.08.16:10:45:16.224: hwmc GPU5: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.16:10:45:16.224: hwmc GPU5: setting zero RPM to 0
2021.08.16:10:45:16.230: hwmc GPU5: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.16:10:45:16.234: hwmc GPU5: set VMEM clocks to 2149 MHz (Vddc 955 mV)
2021.08.16:10:45:16.284: wdog Starting watchdog thread
2021.08.16:10:45:16.873: main Eth: Connecting to ethash pool ssl://us1-etc.ethermine.org:5555 (proto: EthProxy)
2021.08.16:10:45:16.874: main GPU1: 51C 33% 5W, GPU2: 45C 0% 31W, GPU3: 45C 0% 32W, GPU4: 51C 0% 4W, GPU5: 46C 17% 31W
GPU1: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU2: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU3: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU4: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU5: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPUs power: 102.7 W; cost: 0.12 USD/day
2021.08.16:10:45:17.035: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.16:10:45:17.035: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:45:17.063: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2021.08.16:10:45:17.063: eths Eth: New job #485db1e1 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:17.065: GPU1 GPU1: Starting up... (0)
2021.08.16:10:45:17.065: GPU1 GPU1: Generating etchash light cache for epoch #222
2021.08.16:10:45:17.070: GPU2 GPU2: Starting up... (0)
2021.08.16:10:45:17.072: GPU3 GPU3: Starting up... (0)
2021.08.16:10:45:17.074: GPU4 GPU4: Starting up... (0)
2021.08.16:10:45:17.078: main Listening for CDM remote manager at port 1234 in full mode
2021.08.16:10:45:17.079: GPU5 GPU5: Starting up... (0)
2021.08.16:10:45:18.684: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2021.08.16:10:45:18.684: eths Eth: New job #76b55f0b from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:19.355: GPU1 Light cache generated in 2.3 s (19.1 MB/s)
2021.08.16:10:45:19.681: GPU1 GPU1: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.16:10:45:19.682: GPU1 GPU1: Allocating dual DAG (3.80 GB); good for epoch up to #224
2021.08.16:10:45:19.740: GPU1 GPU1: Generating DAG for epoch #222
2021.08.16:10:45:20.050: GPU2 GPU2: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.16:10:45:20.050: GPU2 GPU2: Allocating dual DAG (3.80 GB); good for epoch up to #224
2021.08.16:10:45:20.118: GPU2 GPU2: Generating DAG for epoch #222
2021.08.16:10:45:20.444: GPU3 GPU3: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.16:10:45:20.444: GPU3 GPU3: Allocating dual DAG (3.80 GB); good for epoch up to #224
2021.08.16:10:45:20.506: GPU3 GPU3: Generating DAG for epoch #222
2021.08.16:10:45:20.830: GPU4 GPU4: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.16:10:45:20.832: GPU4 GPU4: Allocating dual DAG (3.80 GB); good for epoch up to #224
2021.08.16:10:45:20.894: GPU4 GPU4: Generating DAG for epoch #222
2021.08.16:10:45:21.219: GPU5 GPU5: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.16:10:45:21.219: GPU5 GPU5: Allocating dual DAG (3.80 GB); good for epoch up to #224
2021.08.16:10:45:21.276: GPU5 GPU5: Generating DAG for epoch #222
2021.08.16:10:45:21.633: GPU1 GPU1: DAG 12%
2021.08.16:10:45:21.988: GPU2 GPU2: DAG 13%
2021.08.16:10:45:22.376: GPU3 GPU3: DAG 14%
2021.08.16:10:45:22.682: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2021.08.16:10:45:22.683: eths Eth: New job #d7fcb8f3 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:22.762: GPU4 GPU4: DAG 14%
2021.08.16:10:45:23.134: GPU1 GPU1: DAG 27%
2021.08.16:10:45:23.180: GPU5 GPU5: DAG 14%
2021.08.16:10:45:23.329: eths Eth: New job #3bd452a1 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:23.490: GPU2 GPU2: DAG 27%
2021.08.16:10:45:23.878: GPU3 GPU3: DAG 28%
2021.08.16:10:45:24.262: GPU4 GPU4: DAG 29%
2021.08.16:10:45:24.636: GPU1 GPU1: DAG 41%
2021.08.16:10:45:24.684: GPU5 GPU5: DAG 29%
2021.08.16:10:45:24.993: GPU2 GPU2: DAG 42%
2021.08.16:10:45:25.350: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x60e900dbad0assbad0ass7587891a1d0a62e478e1dc50151147944e30f43c1f5","0xc1d4286fb91397bad0ass0bad0assd69390e685f0b972f1ecd66fa8d793fad12","0xbad0ass0bad0ass26d694b2e62d01511f12a6061fbaec8bc02bad0ass70e52ba","0xcb964f"]}
2021.08.16:10:45:25.350: eths Eth: New job #60e900d4 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:25.381: GPU3 GPU3: DAG 42%
2021.08.16:10:45:25.431: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x60e9bad0ass0bad0assff7587891a1d0a62e478e1bad0ass147944e30f43c1f5","0xc1d4bad0ass0bad0ass0153ac966bd69390ebad0ass0bad0ass6fa8d793fad12","0xbad0ass112e0be826d69bad0ass01511f12a6061fbaec8bc02357593e70e52ba","0xcb964f"]}
2021.08.16:10:45:25.456: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x60ebadass0badassdfff7587891a1d0a62e478e1bad0ass0bad0ass0f43c1f5","0xc1d4286fb91bad0ass0bad0ass66bd69390e685f0b9bad0ass0bad0ass3fad12","0xbad0ass0bad0ass26d694b2e62d0151bad0ass0bad0assbc02357593e70e52ba","0xcb964f"]}
2021.08.16:10:45:25.763: GPU4 GPU4: DAG 43%
2021.08.16:10:45:26.138: GPU1 GPU1: DAG 55%
2021.08.16:10:45:26.187: GPU5 GPU5: DAG 43%
2021.08.16:10:45:26.495: GPU2 GPU2: DAG 56%
2021.08.16:10:45:26.881: GPU3 GPU3: DAG 56%
2021.08.16:10:45:26.989: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:45:27.019: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bad0ass0bad0ass4dfff7587891a1d0a62e478e1dc501bad0ass0bad0ass1f5","0xc1bad0ass0bad0assb50153ac966bd69390ebad0ass0bad0ass6fa8d793fad12","0xbad0ass0bad0ass26d694b2e62d015bad0ass0bad0ass8bc023bad0ass0bad0ass","0xcb777f"]}
2021.08.16:10:45:27.264: GPU4 GPU4: DAG 57%
2021.08.16:10:45:27.640: GPU1 GPU1: DAG 69%
2021.08.16:10:45:27.688: GPU5 GPU5: DAG 57%
2021.08.16:10:45:28.263: GPU2 GPU2: DAG 70%
2021.08.16:10:45:28.592: GPU3 GPU3: DAG 70%
2021.08.16:10:45:28.903: GPU4 GPU4: DAG 70%
2021.08.16:10:45:29.143: GPU1 GPU1: DAG 81%
2021.08.16:10:45:29.321: GPU5 GPU5: DAG 70%
2021.08.16:10:45:29.764: GPU2 GPU2: DAG 84%
2021.08.16:10:45:30.093: GPU3 GPU3: DAG 84%
2021.08.16:10:45:30.403: GPU4 GPU4: DAG 84%
2021.08.16:10:45:30.646: GPU1 GPU1: DAG 95%
2021.08.16:10:45:30.821: GPU5 GPU5: DAG 84%
2021.08.16:10:45:31.265: GPU2 GPU2: DAG 99%
2021.08.16:10:45:31.334: GPU1 GPU1: DAG generated in 11.6 s (241.5 MB/s)
2021.08.16:10:45:31.338: GPU1 GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 3)
2021.08.16:10:45:31.594: GPU3 GPU3: DAG 99%
2021.08.16:10:45:31.629: GPU2 GPU2: DAG generated in 11.5 s (243.3 MB/s)
2021.08.16:10:45:31.634: GPU2 GPU2: Using Ethash OCL kernels (Ellesmere; -clkernel 3)
2021.08.16:10:45:31.907: GPU4 GPU4: DAG 98%
2021.08.16:10:45:31.970: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xa8db559592bad0ass0bad0assf1294ece87be9d1bb957a2bec05c0deac6d039","0xc1d428bad0ass0bad0ass53ac966bd69390e685f0b972f1ecd66fa8d793fad12","0xbad0ass0bad0ass26d694b2e62d01511f12a6061fbaec8bc078676693e70e52ba","0xcb9650"]}
2021.08.16:10:45:31.970: eths Eth: New job #a8db5595 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:31.985: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.08.16:10:45:31.985: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2021.08.16:10:45:31.989: GPU3 GPU3: DAG generated in 11.5 s (243.9 MB/s)
2021.08.16:10:45:32.011: GPU3 GPU3: Using Ethash OCL kernels (Ellesmere; -clkernel 3)
2021.08.16:10:45:32.322: GPU5 GPU5: DAG 98%
2021.08.16:10:45:32.329: GPU4 GPU4: DAG generated in 11.4 s (244.9 MB/s)
2021.08.16:10:45:32.333: GPU4 GPU4: Using Ethash OCL kernels (Ellesmere; -clkernel 3)
2021.08.16:10:45:32.783: GPU5 GPU5: DAG generated in 11.5 s (243.3 MB/s)
2021.08.16:10:45:32.784: GPU5 GPU5: Using Ethash OCL kernels (Ellesmere; -clkernel 3)
2021.08.16:10:45:35.731: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":
2021.08.16:10:45:35.731: eths Eth: New job #c3d0e2c8 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:36.990: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:45:39.705: eths Eth: New job #5b3298ba from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:45:41.374: hwmc GPU1: set VRAM refresh rate -vmr 48
2021.08.16:10:45:42.381: hwmc GPU2: set VRAM refresh rate -vmr 48
2021.08.16:10:45:42.382: hwmc GPU3: set VRAM refresh rate -vmr 48
2021.08.16:10:45:42.385: hwmc GPU4: set VRAM refresh rate -vmr 48
2021.08.16:10:45:43.388: hwmc GPU5: set VRAM refresh rate -vmr 48
2021.08.16:10:45:46.991: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:45:47.077: main GPUs: 1: 32.685 MH/s (0) 2: 32.767 MH/s (0) 3: 32.609 MH/s (0) 4: 32.148 MH/s (0) 5: 32.179 MH/s (0)
2021.08.16:10:45:56.992: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:45:56.992: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","worker":"Zilla-ETC-1","params":["0x9bfd5db","0x8b5f099e724a4135d69e0275d4422805504ad5537d6eb130fb72d19446a6f49e"]}
2021.08.16:10:45:57.167: eths Eth: Share actual difficulty: 4063 MH
2021.08.16:10:45:57.197: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2021.08.16:10:45:57.198: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.08.16:10:45:57.198: eths Eth: Share accepted in 31 ms
2021.08.16:10:46:01.956: main
2021.08.16:10:46:01.956: main *** 0:00 *** 8/16 10:46 **************************************
2021.08.16:10:46:01.956: main Eth: Mining ETC on ssl://us1-etc.ethermine.org:5555 for 0:00
2021.08.16:10:46:01.956: main Eth: Accepted shares 1 (0 stales), rejected shares 0 (0 stales)
2021.08.16:10:46:01.956: main Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00%
2021.08.16:10:46:01.957: main Eth: Maximum difficulty of found share: 4063 MH
2021.08.16:10:46:01.957: main Eth: Average speed (5 min): 164.311 MH/s
2021.08.16:10:46:01.957: main Eth: Estimated income: 9.75 USD/day
2021.08.16:10:46:01.957: main ETC exchange rate: 71.19 USD
2021.08.16:10:46:01.957: main
2021.08.16:10:46:02.161: main Eth speed: 167.273 MH/s, shares: 1/0/0, time: 0:00
2021.08.16:10:46:02.161: main GPUs: 1: 33.522 MH/s (1) 2: 33.760 MH/s (0) 3: 33.619 MH/s (0) 4: 33.142 MH/s (0) 5: 33.229 MH/s (0)
2021.08.16:10:46:06.993: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.16:10:46:10.668: GPU3 Eth: GPU3: ETH share found!
2021.08.16:10:46:10.668: eths Eth: Share actual difficulty: 4273 MH
2021.08.16:10:46:10.697: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.08.16:10:46:10.697: eths Eth: Share accepted in 29 ms
2021.08.16:10:46:13.312: eths Eth: New job #cfb8344c from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.16:10:46:14.343: GPU2 Eth: GPU2: ETH share found!
2021.08.16:10:46:14.343: eths Eth: Share actual difficulty: 4801 MH
2021.08.16:10:46:14.387: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.08.16:10:46:14.387: eths Eth: Share accepted in 44 ms
2021.08.16:10:46:16.621: main GPU1: 68C 53% 108W, GPU2: 64C 24% 98W, GPU3: 60C 24% 104W, GPU4: 66C 44% 97W, GPU5: 63C 24% 98W
GPU1: cclock 1275 MHz, cvddc 956 mV, mclock 2155 MHz, 310 kH/J
GPU2: cclock 1275 MHz, cvddc 956 mV, mclock 2175 MHz, 345 kH/J
GPU3: cclock 1275 MHz, cvddc 956 mV, mclock 2170 MHz, 324 kH/J
GPU4: cclock 1275 MHz, cvddc 956 mV, mclock 2133 MHz, 340 kH/J
GPU5: cclock 1275 MHz, cvddc 956 mV, mclock 2149 MHz, 340 kH/J
GPUs power: 504.9 W; cost: 0.61 USD/day; 331 kH/J
2021.08.16:10:46:16.994: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]
2021.08.16:10:46:17.224: main Eth speed: 167.276 MH/s, shares: 3/0/0, time: 0:01
2021.08.16:10:46:17.224: main GPUs: 1: 33.537 MH/s (1) 2: 33.755 MH/s (1) 3: 33.614 MH/s (1) 4: 33.132 MH/s (0) 5: 33.238 MH/s (0)
2021.08.16:10:46:20.336: GPU5 Eth: GPU5: ETH share found!
2021.08.16:10:46:20.336: eths Eth: Share actual difficulty: 74.4 GH (!)
2021.08.16:10:46:20.368: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2021.08.16:10:46:20.371: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2021.08.16:10:46:20.371: eths Eth: Share accepted in 35 ms
2021.08.16:10:46:26.995: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
August 16, 2021, 10:02:46 AM
I am highly pleased with the new 5.7b release.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Can you post starting of mining screen until DAG generated?Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
And please with clgreen option.
For me clgreen didn't work. Miner says that GPU0 ignores clgreen 1. I want to figure out why.
August 16, 2021, 09:30:43 AM
I am highly pleased with the new 5.7b release.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Can you post starting of mining screen until DAG generated?Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Code:
2021.08.15:12:59:32.218: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.15:12:59:32.218: main Cmd line:
2021.08.15:12:59:32.218: main config.txt: -pool ssl://us1-etc.ethermine.org:5555 -pool2 ssl://eu1-etc.ethermine.org:5555 -wal 0xfe1230499711422283deC8381627FBd97a66671B449 -wal2 0xfe12390af7114851478384B243F666a3753123449 -worker Zilla-ETC-1 -worker2 Zilla-ETC-2 -coin etc -coin2 etc -rmode 2 -cclock 1275,1275,1275,1275,1275 -cvddc 945,955,945,945,945 -mclock 2155,2175,2170,2133,2149 -mvddc 955,955,955,955,955 -mi 14,14,14,14,14 -gt 37,41,37,38,38 -stales 1 -stales2 1 -fret 3 -ftimeout 600 -ptimeout 30 -retrydelay 5 -rate 1 -cdm 2 -cdmport xxxx -cdmpass ?????? -cdmrs -amd -acm -clKernel 3,3,3,3,3 -clgreen 0,0,0,0,0 -clNew 1,1,1,1,1 -clf 2,2,2,2,2 -mode 1,1,1,1,1 -gbase 1 -minRigSpeed 140 -eres 2,2,2,2,2 -dagrestart 2 -lidag 1,1,1,1,1 -gser 0 -gpureset 0,0,0,0,0 -rvram -1 -wdog 1 -wdtimeout 60 -log 1 -logfile ETC_Log.txt -logdir c:\miners\phoenix\logs -logsmaxsize 200 -gswin 15 -gsi 15 -astats 1 -hwm 2 -hstats 2 -tt 65,65,65,65,65 -prate 0.05 -fanmin 25 -fanmax 80 -fcm 0 -tmax 0 -tstop 70 -tstart 50 -mt 0 -ttli 69 -vmr 48,48,48,48,48
2021.08.15:12:59:33.703: main OpenCL driver version: 20.4.x
2021.08.15:12:59:33.732: main Available GPUs for mining:
2021.08.15:12:59:33.732: main GPU1: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.15:12:59:33.732: main GPU2: Radeon RX 580 Series (pcie 3), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.15:12:59:33.732: main GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.15:12:59:33.732: main GPU4: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.15:12:59:33.732: main GPU5: Radeon RX 580 Series (pcie 7), OpenCL 2.0, 4 GB VRAM, 36 CUs
2021.08.15:12:59:33.732: main ADL library initialized
2021.08.15:12:59:34.904: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.15:12:59:34.904: main Eth: primary pool: ssl://us1-etc.ethermine.org:5555
2021.08.15:12:59:34.909: main Starting GPU mining
2021.08.15:12:59:34.909: main Matched GPU1 to ADL adapter index 0 (method 1)
2021.08.15:12:59:34.937: main GPU1: AMD driver 20.4.1
2021.08.15:12:59:34.937: main GPU1: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.15:12:59:34.937: main GPU1: using AMD driver ver 20.4.1
2021.08.15:12:59:34.937: main Matched GPU2 to ADL adapter index 24 (method 1)
2021.08.15:12:59:34.966: main GPU2: AMD driver 20.4.1
2021.08.15:12:59:34.966: main GPU2: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.15:12:59:34.966: main GPU2: using AMD driver ver 20.4.1
2021.08.15:12:59:34.966: main Matched GPU3 to ADL adapter index 32 (method 1)
2021.08.15:12:59:34.996: main GPU3: AMD driver 20.4.1
2021.08.15:12:59:34.996: main GPU3: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.15:12:59:34.996: main GPU3: using AMD driver ver 20.4.1
2021.08.15:12:59:34.996: main Matched GPU4 to ADL adapter index 8 (method 1)
2021.08.15:12:59:35.025: main GPU4: AMD driver 20.4.1
2021.08.15:12:59:35.025: main GPU4: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.15:12:59:35.025: main GPU4: using AMD driver ver 20.4.1
2021.08.15:12:59:35.026: main Matched GPU5 to ADL adapter index 16 (method 1)
2021.08.15:12:59:35.055: main GPU5: AMD driver 20.4.1
2021.08.15:12:59:35.055: main GPU5: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.15:12:59:35.055: main GPU5: using AMD driver ver 20.4.1
2021.08.15:12:59:35.141: hwmc GPU1: switching to alt fan control mode
2021.08.15:12:59:35.144: hwmc GPU1: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.15:12:59:35.145: hwmc GPU1: setting zero RPM to 0
2021.08.15:12:59:35.154: hwmc GPU1: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.15:12:59:35.159: hwmc GPU1: set VMEM clocks to 2155 MHz (Vddc 955 mV)
2021.08.15:12:59:35.159: hwmc GPU2: switching to alt fan control mode
2021.08.15:12:59:35.159: hwmc GPU2: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.15:12:59:35.159: hwmc GPU2: setting zero RPM to 0
2021.08.15:12:59:35.166: hwmc GPU2: set GPU clocks to 1275 MHz (Vddc 955 mV)
2021.08.15:12:59:35.170: hwmc GPU2: set VMEM clocks to 2175 MHz (Vddc 955 mV)
2021.08.15:12:59:35.170: hwmc GPU3: switching to alt fan control mode
2021.08.15:12:59:35.171: hwmc GPU3: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.15:12:59:35.171: hwmc GPU3: setting zero RPM to 0
2021.08.15:12:59:35.177: hwmc GPU3: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.15:12:59:35.182: hwmc GPU3: set VMEM clocks to 2170 MHz (Vddc 955 mV)
2021.08.15:12:59:35.182: hwmc GPU4: switching to alt fan control mode
2021.08.15:12:59:35.184: hwmc GPU4: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.15:12:59:35.184: hwmc GPU4: setting zero RPM to 0
2021.08.15:12:59:35.190: hwmc GPU4: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.15:12:59:35.194: hwmc GPU4: set VMEM clocks to 2133 MHz (Vddc 955 mV)
2021.08.15:12:59:35.194: hwmc GPU5: switching to alt fan control mode
2021.08.15:12:59:35.194: hwmc GPU5: set auto fan: 65C target temp (min fan 25, max fan 80)
2021.08.15:12:59:35.194: hwmc GPU5: setting zero RPM to 0
2021.08.15:12:59:35.200: hwmc GPU5: set GPU clocks to 1275 MHz (Vddc 945 mV)
2021.08.15:12:59:35.204: hwmc GPU5: set VMEM clocks to 2149 MHz (Vddc 955 mV)
2021.08.15:12:59:35.255: wdog Starting watchdog thread
2021.08.15:12:59:35.820: main Eth: Connecting to ethash pool ssl://us1-etc.ethermine.org:5555 (proto: EthProxy)
2021.08.15:12:59:35.821: main GPU1: 53C 33% 5W, GPU2: 48C 17% 31W, GPU3: 45C 17% 32W, GPU4: 52C 0% 4W, GPU5: 49C 17% 31W
GPU1: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU2: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU3: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU4: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPU5: cclock 300 MHz, cvddc 750 mV, mclock 300 MHz
GPUs power: 103.5 W; cost: 0.12 USD/day
2021.08.15:12:59:35.834: eths Eth: Connected to SSL ethash pool us1-etc.ethermine.org:5555 (172.65.245.119)
2021.08.15:12:59:35.892: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"Zilla-ETC-1","params":["0xfe5e820af711483deC8384B243FBd9a37571B449"]}
2021.08.15:12:59:35.925: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.15:12:59:35.925: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","worker":"Zilla-ETC-1","params":[]}
2021.08.15:12:59:35.959: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe8784e44aeff4ef3bc9bdd3b14cc45a2f51d4566e1e5c743414528e6e880643c","0xc1d4286fb91397ce0b50153ac966bd69390e685f0b972f1ecd66fa8d793fad12","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xcb7f8b"]}
2021.08.15:12:59:35.959: eths Eth: New job #e8784e44 from ssl://us1-etc.ethermine.org:5555; diff: 4000MH
2021.08.15:12:59:35.960: GPU1 GPU1: Starting up... (0)
2021.08.15:12:59:35.960: GPU1 GPU1: Generating etchash light cache for epoch #222
2021.08.15:12:59:35.965: GPU2 GPU2: Starting up... (0)
2021.08.15:12:59:35.967: GPU3 GPU3: Starting up... (0)
2021.08.15:12:59:35.970: GPU4 GPU4: Starting up... (0)
2021.08.15:12:59:35.972: GPU5 GPU5: Starting up... (0)
2021.08.15:12:59:36.024: main Listening for CDM remote manager at port 1492 in full mode
2021.08.15:12:59:38.251: GPU1 Light cache generated in 2.3 s (19.1 MB/s)
2021.08.15:12:59:38.579: GPU1 GPU1: Free VRAM: 3.948 GB; used: 0.052 GB
2021.08.15:12:59:38.579: GPU1 GPU1: Allocating dual DAG (3.80 GB); good for epoch up to #224
August 16, 2021, 08:17:22 AM
Error Log Output
2021.08.15:02:19:02.140: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.15:02:19:02.140: main Cmd line: -config default.cfg
2021.08.15:02:19:02.140: main default.cfg: -mode 1 -coin eth -nvidia -nvdo 0 -rmode 0 -powlim -35 -mi 6 -cclock -400 -mclock +1100 -fanmin 75 -gswin 15 -gsi 15 -hstats 2 -astats 1 -cdm 2 -cdmrs -cdmport 51510 -cdmpass #### -logfile logs\
2021.08.15:02:19:02.173: main CUDA version: 11.0, CUDA runtime: 8.0
2021.08.15:02:19:02.173: main Available GPUs for mining:
2021.08.15:02:19:02.173: main GPU1: NVIDIA GeForce RTX 3060 (pcie 3), CUDA cap. 8.6, 12 GB VRAM, 28 CUs
Did I miss something in setting up this Card? Any insight is greatly appreciated.
To know what is wrong, you need to run miner through one command line first. For example, try this: "./PhoenixMiner -pool eth.cruxpool.com:5555 -wal YOUR_ETHEREUM-ADDRESS -worker BITCOINTALK_RULEZ"2021.08.15:02:19:02.140: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.15:02:19:02.140: main Cmd line: -config default.cfg
2021.08.15:02:19:02.140: main default.cfg: -mode 1 -coin eth -nvidia -nvdo 0 -rmode 0 -powlim -35 -mi 6 -cclock -400 -mclock +1100 -fanmin 75 -gswin 15 -gsi 15 -hstats 2 -astats 1 -cdm 2 -cdmrs -cdmport 51510 -cdmpass #### -logfile logs\
2021.08.15:02:19:02.173: main CUDA version: 11.0, CUDA runtime: 8.0
2021.08.15:02:19:02.173: main Available GPUs for mining:
2021.08.15:02:19:02.173: main GPU1: NVIDIA GeForce RTX 3060 (pcie 3), CUDA cap. 8.6, 12 GB VRAM, 28 CUs
Did I miss something in setting up this Card? Any insight is greatly appreciated.
Need to run PhoenixMiner as root.
It is not safe to run miners as root. I’ve never had such a problem, but there’s nothing to stop you from changing the permissions for executables to run on behalf of an ordinary user. August 16, 2021, 07:18:01 AM
I have 1070 but with this miner I get only 18 mh for ethereum.
Can I get around 30 mh with this miner if I set it up correctly?
Can I get around 30 mh with this miner if I set it up correctly?
try this set
memory +500
core +100
power 85%-90%
I tried, but hashrate is the same, 18 mh per card with Phoenix miner.
I have a GTX1070 running on Linux. My config settings are:
-nvidia
-nvKernel 3
-nvdo 1
-proto 3
-cdm 1
-prate 0.0703
-coin eth
-log 1
-logdir /home/USER/Miners/logs
-logfile ethermine-pm.log
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
-wal YOUR_WALLET.nvidia
Need to run PhoenixMiner as root.
Average speed (5 min): 25.050 MH/s
Effective speed: 24.51 MH/s; at pool: 24.49 MH/s
Hope it helps.
August 16, 2021, 04:21:10 AM
I am highly pleased with the new 5.7b release.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Can you post starting of mining screen until DAG generated? Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
August 16, 2021, 03:54:16 AM
I have 1070 but with this miner I get only 18 mh for ethereum.
Can I get around 30 mh with this miner if I set it up correctly?
Can I get around 30 mh with this miner if I set it up correctly?
try this set
memory +500
core +100
power 85%-90%
I tried, but hashrate is the same, 18 mh per card with Phoenix miner.
August 15, 2021, 08:51:58 PM
I have 1070 but with this miner I get only 18 mh for ethereum.
Can I get around 30 mh with this miner if I set it up correctly?
Can I get around 30 mh with this miner if I set it up correctly?
try this set
memory +500
core +100
power 85%-90%
August 15, 2021, 07:59:02 PM
I am highly pleased with the new 5.7b release.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
Absolutely no issues with the upgrade and my overall hash rate went from 166.75 to 167.25.
I am using the -clKernel 3 settings and -clgreen.
I have 5 Radeon RX580 4GB Cards. I mine ETC.
Thanks Phoenix for the new code.
August 14, 2021, 11:27:04 PM
PhoenixMiner 5.7b is officially released. You can find the download link and the checksums in the first post of this thread.
It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
Why -clgreen 1 didn't work?It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
Miner just write that GPU0 is ignore -clgreen 1 option. Polaris cards RX 580 8Gb.
August 14, 2021, 11:22:13 PM
PhoenixMiner 5.7b is officially released. You can find the download link and the checksums in the first post of this thread.
It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
Why -clgreen 1 didn't work?It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
Miner just write that GPU0 is ignore -clgreen 1 option. Polaris cards RX 580 8Gb.
August 14, 2021, 07:40:27 PM
PhoenixMiner 5.7b is officially released. You can find the download link and the checksums in the first post of this thread.
It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
August 14, 2021, 07:20:10 PM
Hi all,
I got a strange problem and am not sure if anyone here has the same issue.
My rig is running win10 with phoneix5.6d. Since I only mine 12 hrs a day to avoid peak time electric fees, it is auto turn on and off every day. The miner is autorun using the task scheduler after the rig is on. It has 10 gpus (6*rx580 + 4*gtx1070) so can generate around 300mhs. However, I have noted that when the rig is auto on and run the miner, it only got around 292mhs. I have to manually close the miner and run it again to get 300mhs, otherwise, it will stay around 289~292. I also found that the report hashrates in bitfly is unsteady when it's around 289~292. if I restart the miner (not rig), the report hashrates will be steadily staying at 300mhs
For me, it sounds like the miner needs to be "warm up"?? anyone here got the same problem?? Btw, I remember I don't have this problem when using claymore.
I got a strange problem and am not sure if anyone here has the same issue.
My rig is running win10 with phoneix5.6d. Since I only mine 12 hrs a day to avoid peak time electric fees, it is auto turn on and off every day. The miner is autorun using the task scheduler after the rig is on. It has 10 gpus (6*rx580 + 4*gtx1070) so can generate around 300mhs. However, I have noted that when the rig is auto on and run the miner, it only got around 292mhs. I have to manually close the miner and run it again to get 300mhs, otherwise, it will stay around 289~292. I also found that the report hashrates in bitfly is unsteady when it's around 289~292. if I restart the miner (not rig), the report hashrates will be steadily staying at 300mhs
For me, it sounds like the miner needs to be "warm up"?? anyone here got the same problem?? Btw, I remember I don't have this problem when using claymore.
For better answer you need to share your log files. I’m guessing from what you said possibly reason is, if you are using straps and rxboost they don’t running with automatic start until you start the rig manually with administrator rights.
this is my log file when running the miner the first time and got 292mhs
https://www.dropbox.com/s/d568k76xa8urlg1/log20210814_214923.txt?dl=0
this is when close and reopen the miner for a second time. I can get around 300mhs
https://www.dropbox.com/s/k2ej440ogvp4yjo/log20210814_224919.txt?dl=0
I don't use rxboost and strape. the setting is just a simple wallet address. I use afterburner for oc. I also noted that if the rig is running at 300mhs, which means the miner is restarted for a second time. The rig will become unstable, it will crash and reboot at least once 12hrs. after reboot it will back to around 292mhs unless close and open the miner again.
August 14, 2021, 04:14:46 PM
thanks for letting me know why its says im a "newbie"
was at the eth farm today replaced two risers and found that we have at least 5 failed gpu fans
turtlecoin is pumping - stop mining it so i can get some ;-)
best wishes to the durrty miners
gpu prices in the uk are a little lower and my partners have started buying them again
buy them summer 2022 thats what i say nobody listens to me until its too late
was at the eth farm today replaced two risers and found that we have at least 5 failed gpu fans
turtlecoin is pumping - stop mining it so i can get some ;-)
best wishes to the durrty miners
gpu prices in the uk are a little lower and my partners have started buying them again
buy them summer 2022 thats what i say nobody listens to me until its too late
August 14, 2021, 02:31:38 PM
I have 1070 but with this miner I get only 18 mh for ethereum.
Can I get around 30 mh with this miner if I set it up correctly?
Can I get around 30 mh with this miner if I set it up correctly?
August 14, 2021, 02:18:56 PM
Hi all,
I got a strange problem and am not sure if anyone here has the same issue.
My rig is running win10 with phoneix5.6d. Since I only mine 12 hrs a day to avoid peak time electric fees, it is auto turn on and off every day. The miner is autorun using the task scheduler after the rig is on. It has 10 gpus (6*rx580 + 4*gtx1070) so can generate around 300mhs. However, I have noted that when the rig is auto on and run the miner, it only got around 292mhs. I have to manually close the miner and run it again to get 300mhs, otherwise, it will stay around 289~292. I also found that the report hashrates in bitfly is unsteady when it's around 289~292. if I restart the miner (not rig), the report hashrates will be steadily staying at 300mhs
For me, it sounds like the miner needs to be "warm up"?? anyone here got the same problem?? Btw, I remember I don't have this problem when using claymore.
I got a strange problem and am not sure if anyone here has the same issue.
My rig is running win10 with phoneix5.6d. Since I only mine 12 hrs a day to avoid peak time electric fees, it is auto turn on and off every day. The miner is autorun using the task scheduler after the rig is on. It has 10 gpus (6*rx580 + 4*gtx1070) so can generate around 300mhs. However, I have noted that when the rig is auto on and run the miner, it only got around 292mhs. I have to manually close the miner and run it again to get 300mhs, otherwise, it will stay around 289~292. I also found that the report hashrates in bitfly is unsteady when it's around 289~292. if I restart the miner (not rig), the report hashrates will be steadily staying at 300mhs
For me, it sounds like the miner needs to be "warm up"?? anyone here got the same problem?? Btw, I remember I don't have this problem when using claymore.
For better answer you need to share your log files. I’m guessing from what you said possibly reason is, if you are using straps and rxboost they don’t running with automatic start until you start the rig manually with administrator rights.
Jump to: