PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 473.

elgi76

member

Activity: 124

Merit: 10

Quote from: flatounet on February 17, 2018, 04:11:16 AM

https://www.noelshack.com/2018-07-6-1518858272-avg.jpg

any possibility to connect to 2 pools or 2 account in same time ?
to optimise minning ?

im mining in average at 428 , last week i was at 428
now i see mining down & up , 24h @ 380 mhs .....

can you look for optimise this way ?
may be ask job to 2 pool or 2 account ,and optimizes, saturated cards to work

yes it's may be 2h @380mhs and next 2 @476 , yes average is 428

but for me card minning @380 was money lose here ,
i prefert minning non stop @ 428 or more ...

any way to sature work queue ?

your work queue is already satured. when you mine, sometime you have good luck, sometime now.
app try to find the good answer, but sometime it don't find, sometime it find.
you can try with multiple pool mining but it will be same. it's never linear.

Asgaroth

newbie

Activity: 49

Merit: 0

https://preview.ibb.co/nMvZwS/phoenix_2_6.png

My reported hash rate matches the pool (MiningPoolHub), this is with phoenix v2.6

flatounet

jr. member

Activity: 56

Merit: 2

https://www.noelshack.com/2018-07-6-1518858272-avg.jpg

any possibility to connect to 2 pools or 2 account in same time ?
to optimise minning ?

im mining in average at 428 , last week i was at 428
now i see mining down & up , 24h @ 380 mhs .....

can you look for optimise this way ?
may be ask job to 2 pool or 2 account ,and optimizes, saturated cards to work

yes it's may be 2h @380mhs and next 2 @476 , yes average is 428

but for me card minning @380 was money lose here ,
i prefert minning non stop @ 428 or more ...

any way to sature work queue ?

b0n40

newbie

Activity: 12

Merit: 0

Quote from: Kartel on February 16, 2018, 06:54:44 PM

Quote from: b0n40 on February 16, 2018, 09:57:45 AM

Quote from: Kartel on February 16, 2018, 07:34:46 AM

Quote from: Kartel on February 14, 2018, 08:09:50 AM

Hello, have an issue, working great since few days, after a reboot when i try to launch it my win10 just freez.

Have already disable quick edit mode, enable it too, same thing, always freezing.

Any help will be wonderfull here...
thx

@PhoenixMiner
Still have this issue, any help?

when asking for help be helpful... post your setup, your command line for starting the phoenix miner... without that only Nostradamus can help you

Yep sorry

Have 6 GTX 1070 8gb / Asrock H81 BTC R2.0 working great with claymore, and with phoenix few days ago...
There is my command line:

Quote

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool eu1-etc.ethermine.org:14444 -pool2 eu1-etc.ethermine.org:4444 -wal 0xxxxx.Rig01 -coin etc -ftimeout 150

The window pop up, stay a few sec, then nothing, my windows always crashing when i try to open this start.bat

try simpler command line: PhoenixMiner.exe -pool eu1-etc.ethermine.org:14444 -wal 0xxxxx.Rig01 -nvidia
if you have issues opening a bat/txt file. try with notepad++ install and open with it.
it seems like more of windows issue.

flatounet

jr. member

Activity: 56

Merit: 2

Quote from: biggee on February 17, 2018, 01:23:54 AM

Quote from: junkstory on February 16, 2018, 04:57:57 PM

After about 20 hours now, the effective hashrate is about 5% lower than the reported hashrate.

However, that's not to say it isn't normal. I have some machines running Claymore that are 4-6% lower as well, but also some machines on Claymore that are 3-5% higher. I will switch a 8x gpu mining rig to phoenix, run it for 48 hours and report back.

Absolutely agree, I'm not sure pool figures can be relied upon as gospel.

In fact several hours later and my pools stats are now reporting about 10% MORE than the miner is reporting.

I can live with that lol

im not sure ,but it's more about pool side ...

im on nanopool , rigs work at 428 mhs in average ( black line )

but nanopool red line give me one time 250mhs to mine , 10min later 540mhs ,next 10m 380mhs .....

can you look to connect to 2 or 3 pool in same time ( nano / flypool / ...) to get job fpr made miner working @ 420-430 all time long ?

rockk

jr. member

Activity: 20

Merit: 0

2.7 has almost 2x more stales then 2.6

biggee

member

Activity: 73

Merit: 10

Quote from: junkstory on February 16, 2018, 04:57:57 PM

After about 20 hours now, the effective hashrate is about 5% lower than the reported hashrate.

However, that's not to say it isn't normal. I have some machines running Claymore that are 4-6% lower as well, but also some machines on Claymore that are 3-5% higher. I will switch a 8x gpu mining rig to phoenix, run it for 48 hours and report back.

Absolutely agree, I'm not sure pool figures can be relied upon as gospel.

In fact several hours later and my pools stats are now reporting about 10% MORE than the miner is reporting.

I can live with that lol

BennyT

full member

Activity: 259

Merit: 108

Quote from: junkstory on February 16, 2018, 02:50:06 PM

You guys should monitor the actual effective hashrate over an extended period of time (like 48+ hours), which I'm trying to do right now. After 16 hours, the effective hashrate of Phoenix is still below the reported hashrate. Perhaps it's bad luck, perhaps it's not.

No offense to anyone but we should take the reported hashrate with a grain of salt. It's literally just a string.

However, one thing I did notice is that Phoenix runs 1 degree Celsius cooler than Claymore.

I noticed that too. 1 degree cooler on each card. I wonder why

Yellow_donkey

newbie

Activity: 31

Merit: 0

Quote from: janding on February 14, 2018, 10:25:36 PM

Quote from: Yellow_donkey on February 14, 2018, 10:03:30 PM

Quote from: PhoenixMiner on February 14, 2018, 03:39:20 AM

As the work on the hardware control options is taking longer than expected, here is a beta version with the other new features: PhoenixMiner 2.7a. It can be downloaded from here:
https://mega.nz/#F!zUFTyIrC!OSlA4BMlUvFq4HDbkK-AIg

Here are the checksums to verify the download:

Code:

File: PhoenixMiner_2.7a.zip
SHA-1: fd967e62d05adec1c9d6126c347d711ac7028688
SHA-256: 237d6f3f781d9a4a718559c956d2da0bf81e82c374e7ce6dca44e397bcd404ff
SHA-512: 13584ac2a99073e3ea53ecc308ee19422bd26f85e585313740f9e275d0318a7cfa7151f0a63292d97c1736b8d072ea4b8d3743e97927f83979b6d93348b71d18

Note that this is not an official release and the hardware control and solo mining features are not included in it (they will be included in the final 2.7 release). The changes are:

Improvements in switching between normal mode and devfee mode to avoid some GPUs "losing" their overcloking/undervolting settings
Increase the frequency of getWork requests to lower the probability of stale shares
Added support for direct mining of Akroma, WhaleCoin, and Victorium without DevFee switching (use akroma, whale, or vic in the -coin parameter)
Show warning messages and more detailed error messages when the virtual memory is low, or GPU memory is not enough for DAG allocation
Other small improvements and changes

I just tried it and no go. Please confirm that solo mining/direct mining to geth or parity remains a non-feature with 2.7a. Thanks.

from the developer earlier

PhenixMiner does not support dual mining. However we are working on this feature and will introduce it
soon. Solo mining is not supported too as we feel that it is not very practical with the current
mining difficulty.

Ya that is the original statement from like the 2.3 release. I have been following all along and the Dev said he would try to get solo/geth/parity mining out with 2.7a, thus the question to confirm that it is not working as I don't want to troubleshoot something if it is still not available. Alot of past release notes are no longer valid when there are 5 or 6 releases since.

thelovemyth

newbie

Activity: 21

Merit: 0

Quote from: shmeker on February 16, 2018, 03:18:08 PM

This will be work (-cclock 1150 -mclock 2170 -cvddc 850 -mvddc 850) with this minner??? Or how to set the clocks? Huh

I have same question.

cryptoreporting

newbie

Activity: 10

Merit: 0

Please compile a Linux version! Would be willing to test for you! Running right now:

Ubuntu LTS 16.04
4.4.0-112-generic #135-Ubuntu SMP Fri Jan 19 11:48:36 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

Kartel

newbie

Activity: 5

Merit: 0

Quote from: b0n40 on February 16, 2018, 09:57:45 AM

Quote from: Kartel on February 16, 2018, 07:34:46 AM

Quote from: Kartel on February 14, 2018, 08:09:50 AM

Hello, have an issue, working great since few days, after a reboot when i try to launch it my win10 just freez.

Have already disable quick edit mode, enable it too, same thing, always freezing.

Any help will be wonderfull here...
thx

@PhoenixMiner
Still have this issue, any help?

when asking for help be helpful... post your setup, your command line for starting the phoenix miner... without that only Nostradamus can help you

Yep sorry

Have 6 GTX 1070 8gb / Asrock H81 BTC R2.0 working great with claymore, and with phoenix few days ago...
There is my command line:

Quote

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -pool eu1-etc.ethermine.org:14444 -pool2 eu1-etc.ethermine.org:4444 -wal 0xxxxx.Rig01 -coin etc -ftimeout 150

The window pop up, stay a few sec, then nothing, my windows always crashing when i try to open this start.bat

junkstory

newbie

Activity: 12

Merit: 0

After about 20 hours now, the effective hashrate is about 5% lower than the reported hashrate.

However, that's not to say it isn't normal. I have some machines running Claymore that are 4-6% lower as well, but also some machines on Claymore that are 3-5% higher. I will switch a 8x gpu mining rig to phoenix, run it for 48 hours and report back.

janding

jr. member

Activity: 170

Merit: 6

Quote from: biggee on February 16, 2018, 04:10:42 PM

Quote from: junkstory on February 16, 2018, 02:50:06 PM

You guys should monitor the actual effective hashrate over an extended period of time (like 48+ hours), which I'm trying to do right now. After 16 hours, the effective hashrate of Phoenix is still below the reported hashrate. Perhaps it's bad luck, perhaps it's not.

No offense to anyone but we should take the reported hashrate with a grain of salt. It's literally just a string.

Backing this up with my own findings too. What the miner reports and the what the pool reports are two very different things.
Pool hashrate is about 15% lower than what the software is claiming after 9+ hrs straight of mining.

Anybody else finding this?

After running for straight 32 hours I am 4.05% below reported hash rate.
I can accept that.

biggee

member

Activity: 73

Merit: 10

Quote from: junkstory on February 16, 2018, 02:50:06 PM

You guys should monitor the actual effective hashrate over an extended period of time (like 48+ hours), which I'm trying to do right now. After 16 hours, the effective hashrate of Phoenix is still below the reported hashrate. Perhaps it's bad luck, perhaps it's not.

No offense to anyone but we should take the reported hashrate with a grain of salt. It's literally just a string.

Backing this up with my own findings too. What the miner reports and the what the pool reports are two very different things.
Pool hashrate is about 15% lower than what the software is claiming after 9+ hrs straight of mining.

Anybody else finding this?

shmeker

newbie

Activity: 3

Merit: 0

This will be work (-cclock 1150 -mclock 2170 -cvddc 850 -mvddc 850) with this minner??? Or how to set the clocks? Huh

junkstory

newbie

Activity: 12

Merit: 0

You guys should monitor the actual effective hashrate over an extended period of time (like 48+ hours), which I'm trying to do right now. After 16 hours, the effective hashrate of Phoenix is still below the reported hashrate. Perhaps it's bad luck, perhaps it's not.

No offense to anyone but we should take the reported hashrate with a grain of salt. It's literally just a string.

However, one thing I did notice is that Phoenix runs 1 degree Celsius cooler than Claymore.

biggee

member

Activity: 73

Merit: 10

Quote from: jmigdlc99 on February 15, 2018, 08:36:57 PM

Can anyone confirm this is still faster than Claymore given that Claymore v11 is out and claims improvements to hash rate?

Been thinking of switching miner for quite some time now.

Yes, it is faster than Claymore. I'm getting almost 0.7MH/s more out of each of my cards, not crazy but certainly better especially when you consider the lower devfee.

But the thing that has impressed me the most so far is how stable it is. This thing is like a rock, once you set it off you can just forget about it.
From the second you click your BAT file, and you see how fast the thing loads and starts mining, you'll instantly get a sense of how stable this software is.
Not just the software too, my GPUs haven't crashed once since using this yet, something that used to happen a lot with Claymore.

I was having so much trouble with Claymore crashing 2 - 3 times a day for various reasons, this is like a breath of fresh air.

My only criticism is that it doesn't seem to find as many shares as Claymore does. Of course this could just be bad luck but will keep an eye on it.

flatounet

jr. member

Activity: 56

Merit: 2

i found a probleme with phoenix ,

https://eth.nanopool.org/account/0x528fc4ad0e7ff538aae6a2ea712fa06094ce0eca/Rig2

-minRigSpeed Restart the miner if avg 5 min speed is below MH/s

easy , i have made test on rig 2

average (black line is 136 mhs)

i have test -minRigSpeed 129 in command line
and on miner i have see it restarted ,because low minning

but i think you check red line ,check i tested it at 13:30

look at 13:50 , my reported hashrate is 132 but miner restarted ...
( i see a restart in cmd phoenix windows )
but red line from the pool was 68-100 ..... ( no bug or error here ?)

can you edit it for graphic card hashrate and not from pool work gived ?
or if i made error , can we change on long average based ? actually it's on 5 ?
can you let us setup as we want ?

i think im in error ,but i see miner restard because low hash....
i removed -minRigSpeed 129 after , and now ,no anymore probleme .....

thank's

b0n40

newbie

Activity: 12

Merit: 0

Quote from: Kartel on February 16, 2018, 07:34:46 AM

Quote from: Kartel on February 14, 2018, 08:09:50 AM

Hello, have an issue, working great since few days, after a reboot when i try to launch it my win10 just freez.

Have already disable quick edit mode, enable it too, same thing, always freezing.

Any help will be wonderfull here...
thx

@PhoenixMiner
Still have this issue, any help?

when asking for help be helpful... post your setup, your command line for starting the phoenix miner... without that only Nostradamus can help you

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 473. (Read 784985 times)