As a developer, I'd like to say that the code is under very active development with research being done now into smart contracts, side chains, atomic swaps, two-way pegging, and scaling.
Adoption is our number one goal and it starts with providing developers tools they need to write new applications to use Phore. We do not want our coin to be used because people are forced to use it. We want our coin to be used because it's the best solution to a problem.
Topic: [PHR] Phore - 100% PoS 3.0 - Masternodes - Zerocoin - Governance No ICO/Premine - page 51. (Read 67705 times)
November 27, 2017, 07:40:29 AM
November 27, 2017, 05:13:18 AM
Swap Update
The swap has now ended, as posted by burnedbyfees. A total of 7,625,670 PHR was burned in a
transaction fee. Outstanding PHR is now 11,268,429.
https://chainz.cryptoid.info/phr/block.dws?103070.htm
The explorer rich list will reflect the correct stats once it's updated, as it's not real-time.
The swap has now ended, as posted by burnedbyfees. A total of 7,625,670 PHR was burned in a
transaction fee. Outstanding PHR is now 11,268,429.
https://chainz.cryptoid.info/phr/block.dws?103070.htm
The explorer rich list will reflect the correct stats once it's updated, as it's not real-time.
November 27, 2017, 04:45:29 AM
November 27, 2017, 04:33:01 AM
11.2m Phore remain.
The burn is now over.
The burn is now over.
November 27, 2017, 03:28:32 AM
Anyone have the exact time of the burn?
November 27, 2017, 03:22:58 AM
The burn is very soon.
There will be 40% fewer Phore in a few hours.
There will be 40% fewer Phore in a few hours.
November 26, 2017, 11:35:13 PM
If you got your coin on cryptopia, you need to swap too ?
No,no,no.
The swap is for holders of KTK.
They are swapping to Phore, unswapped coins will then be burnt.
If you have Phore you're good.
https://bitcointalksearch.org/topic/m.25184731
http://www.coinmarketcal.com/?form%5Bmonth%5D=&form%5Byear%5D=&form%5Bcoin%5D=Phore+%28PHR%29&form%5Bsort_by%5D=&form%5Bsubmit%5D=
https://twitter.com/PhoreCrypto/status/934472833203306496
November 26, 2017, 08:53:17 PM
I wrote a guide for compiling a PHR wallet on a Raspberry Pi with the latest version of Raspbian.
You can use this to set up a headless or QT wallet to stake, and if you have a static IP you can also run a masternode on the Pi.
If anyone uses this and runs into problems, let me know
https://docs.google.com/document/d/1UUZu7D6zXUv9cio0pzcN4CxWxF9IF58wOnSzWIROvOM/
You can use this to set up a headless or QT wallet to stake, and if you have a static IP you can also run a masternode on the Pi.
If anyone uses this and runs into problems, let me know
https://docs.google.com/document/d/1UUZu7D6zXUv9cio0pzcN4CxWxF9IF58wOnSzWIROvOM/
Thanks for this. I have a single Raspberry Pi I might dust off to give this a shot. Appreciate it.
Phore is now up for listing on: https://masternodes.online/new-masternode-coins/
November 26, 2017, 08:08:38 PM
Masternode question: if I want to run them locally on my server in 4 virtual machines, can I have it operate through a Socks5 proxy as to better protect my privacy?
And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
Did you get this sorted? We have an active tech team available on the discord if you still have questions. I'll also let them know about your questions.
November 26, 2017, 07:09:58 PM
Tomorrow is the last day of the swap. Do not forget to swap your coin, everyone.
Yeah, thanks so much. I have almost forgot about the swap. Today is the last day of PHORE swap. Thanks God. 
November 26, 2017, 05:46:48 PM
How do I know my masternode is still active? I know there is a bug when it shows missing that it could actually be active, is there some time I have to wait after depositing the 10k PHR to the account before it starts staking?
Hi, here's a more prompt response to your question: you will receive a reward within 24 hours. If not check out the discord for support.
Thank you, I will try this but at the moment it might have seemed that I forgot to enable the VPS swap space. When forging, the node would get stuck so I will see if the swap space is the problem.
November 26, 2017, 05:01:51 PM
Recently found Phore scanning the Ann section quite impressed so far. Teams very active on discord and always eager to help/answer any questions. To top it off roadmap being crossed off ahead of schedule in some parts <3.
I'll be hanging around this community for the long term
I'll be hanging around this community for the long term
November 26, 2017, 04:41:28 PM
I wrote a guide for compiling a PHR wallet on a Raspberry Pi with the latest version of Raspbian.
You can use this to set up a headless or QT wallet to stake, and if you have a static IP you can also run a masternode on the Pi.
If anyone uses this and runs into problems, let me know
https://steemit.com/phore/@noxx/compiling-the-phore-wallet-on-raspberry-pi
You can use this to set up a headless or QT wallet to stake, and if you have a static IP you can also run a masternode on the Pi.
If anyone uses this and runs into problems, let me know
https://steemit.com/phore/@noxx/compiling-the-phore-wallet-on-raspberry-pi
November 26, 2017, 02:30:54 PM
Masternode question: if I want to run them locally on my server in 4 virtual machines, can I have it operate through a Socks5 proxy as to better protect my privacy?
And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
You will need a separate ip for each masternode. And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
November 26, 2017, 02:00:44 PM
Masternode question: if I want to run them locally on my server in 4 virtual machines, can I have it operate through a Socks5 proxy as to better protect my privacy?
And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
And if I want to run 4 of them, can I differentiate between them with a different port number? Or can they (my Hyper-V's) all use the same ports?
Masternode manual: https://www.dropbox.com/s/xy3sdb1zxf4h1f6/Phore-Windows-VPS-Server.zip
November 26, 2017, 01:55:44 PM
The burn will be a good thing for Phore! Makes it more interesting.
I bought few Phore already , but I'm waiting for the burn too and then will buy more from Crypotopia.
The burn will gain confidence in the project.
November 26, 2017, 01:52:59 PM
No, it's there mate between Crave and Luxcoin, weekly rewards in USD are on the far right.
Post-edit: I really should start 4 of them like today!
November 26, 2017, 01:39:28 PM
The burn will be a good thing for Phore! Makes it more interesting.
I bought few Phore already , but I'm waiting for the burn too and then will buy more from Crypotopia.
The burn will gain confidence in the project.
November 26, 2017, 01:35:45 PM
I might set up a few masternodes too... What would the monthly rewards be at current value? Let's say 5000 satoshi?
https://masternodes.pro/
No, it's there mate between Crave and Luxcoin, weekly rewards in USD are on the far right.
November 26, 2017, 01:29:20 PM
I might set up a few masternodes too... What would the monthly rewards be at current value? Let's say 5000 satoshi?
https://masternodes.pro/
Jump to: