Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 2. (Read 100955 times)
well its been months and no updates are u going to release the source
September 21, 2014, 04:08:49 AM
my system config:
2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
Does GPU load jumps from 99% to 50%?2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
If this is the case, it needs more power, you can adjust it in MSI Afterburner.
Same problem to me now.. Added more power with afterburner (+20), GPU load stays in 88-94 range but after 30min load falls..
Core clock 1070 and memory clock 1500.. Maybe I need to change these? (I have 3x R9 280x)
September 17, 2014, 06:04:29 PM
hey guys,
quick question....is solo mining still profitable or is it better to go with a pool?
my rig is 2x 280x OC hitting 18.46 CPD
quick question....is solo mining still profitable or is it better to go with a pool?
my rig is 2x 280x OC hitting 18.46 CPD
September 15, 2014, 03:06:27 AM
http://anty.info/primecoin-calculator/ doesn't work any more. How can I calculate my profit ? Example, I have 4 cards 280x with 35 chains per day, how many xpm coins I going to mine a day ? Thank you very much.
The owner of that site was a dickhead anyways.
I'm sure there is other calculators out there
http://anty.info/primecoin-calculator/ doesn't work any more. How can I calculate my profit ? Example, I have 4 cards 280x with 35 chains per day, how many xpm coins I going to mine a day ? Thank you very much.
who will tell it normally? 5 x 280x if not how i can fix it
how to fix it, i change core clock to 1000 ,GPU still down 100% to 0%,then up to 100%
Will you make a version also for old video cards 6970,5970,6990...? I have lots of them also others.
does restarting the mine..resets its block yield and or its fine if restart ....my only concern is that in xpm mining you only get proper reward after mining for around 12 hour..so lets say my miner gets restarted..does that mean i have to start the yield from beginning or its just that pool that determine for how much time i am connected.
It's completely fine to restart it - you don't loose anything. or its fine if restart ....my only concern is that in xpm mining you only get proper reward after mining for around 12 hour..so lets say my miner gets restarted..does that mean i have to start the yield from beginning or its just that pool that determine for how much time i am connected.my system config:
2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
Does GPU load jumps from 99% to 50%?2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
If this is the case, it needs more power, you can adjust it in MSI Afterburner.
my system config:
2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
2 - r9 280x
14.6 driver
pool- ypool.net
the speed remains at around 16 cpd after 30 min the speed starts decreasing slowly ,gpu load is down
any idea?? what may be the problem .
does restarting the mine..resets its block yield and or its fine if restart ....my only concern is that in xpm mining you only get proper reward after mining for around 12 hour..so lets say my miner gets restarted..does that mean i have to start the yield from beginning or its just that pool that determine for how much time i am connected.
or its fine if restart ....my only concern is that in xpm mining you only get proper reward after mining for around 12 hour..so lets say my miner gets restarted..does that mean i have to start the yield from beginning or its just that pool that determine for how much time i am connected. does this work on 14.6? its crashing for me
yes it works the gpu harder so your volts might not be high enough for the clocks u have set
does this work on 14.6? its crashing for me
Any thoughts on how to get this working with normal AMD drivers ? 13.12 will not work even with amd_ocl dll's in the folder. 14.6 does not allow to change clock speeds which makes it unacceptable and anything else is completely useless for mining.... 
who will tell it normally? 5 x 280x if not how i can fix it
http://i7.pixs.ru/storage/6/2/0/SfdnimokJP_9719237_12946620.jpg
http://i7.pixs.ru/storage/6/2/0/SfdnimokJP_9719237_12946620.jpg
Primecoin doesn't have the same profitability factor as it did before. Has this miner even released yet?
NEW POOL 2%
http://www.primetimepool.net/get-started.php
works with free 3.00 primegpu and 4.00 paid version
xpt protocol
http://www.primetimepool.net/get-started.php
works with free 3.00 primegpu and 4.00 paid version
xpt protocol
I have the same with 2 7970. Dev fee version. GPU load = 0. Calatyst 14.3. Mining time stays 0 forever.
Am a paid user, but can't get anything but 0s for mining time, etc. I do see gpu time changing, but it never finds a chain of a
same here. 2x7970(Figuring out if it's a bug in the paid version or something other)
What is the GPU load and GPU memory used (as reported in MSI Afterburner)?
Am a paid user, but can't get anything but 0s for mining time, etc. I do see gpu time changing, but it never finds a chain of a
same here. 2x7970
Jump to: