10% dev for a dead coin...
feel free to code a faster miner with 1% fee if you like..
dead coin... lol
Topic: Primecoin GPU miner: 9.1 CPD on a 280x / pool / 2% dev.fee - page 5. (Read 100962 times)
10% dev for a dead coin...
feel free to code a faster miner with 1% fee if you like..
dead coin... lol
10% dev for a dead coin...
XPM is far from dead.
Our paid customers mine at ~8.2 XPM/day per 280x. It's 3 usd/day with the current network difficulty and prices.
With the fee version it's 2,7 usd/day.
Ok, so we decided to make a 100% pool version for ypool (10% dev.fee).
You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip
Next, we're going to have a special version for Beeeeer (in a week or so).
10% dev for a dead coin... You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip
Next, we're going to have a special version for Beeeeer (in a week or so).
(sorry a coin you largely contributed to kill)what a joke, you are even more greedy than claymore
Version 3.01 is available for Ypool.
- fixed disconnection issue
- "-d" option allows to select on which GPUs to run the miner ("-d 13" uses GPUs #1 and #3)
http://primegpu.com/files/primegpu-ypool.zip
- fixed disconnection issue
- "-d" option allows to select on which GPUs to run the miner ("-d 13" uses GPUs #1 and #3)
http://primegpu.com/files/primegpu-ypool.zip
will this current version work with beeeer?
Nope, beeeer doesn't support XPT protocol.
will this current version work with beeeer?
Looks like some good improvements in the numbers. Why no paid solo version?
Will be available within a week.
Looks like some good improvements in the numbers. Why no paid solo version?
Ok, so we decided to make a 100% pool version for ypool (10% dev.fee).
You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip
Next, we're going to have a special version for Beeeeer (in a week or so).
You can download it from here:
http://primegpu.com/files/primegpu-ypool.zip
Next, we're going to have a special version for Beeeeer (in a week or so).
iis this even an active pool?
no miners in over a month
minin.gs
no miners in over a month
minin.gs
EDIT: if Bitcointalk still isn't showing the picture you can see it HERE
10.23 is kinda low for 290x. Could you check what is GPU load? It should be 98-99%, if not, please try running the miner not using CPU in other tasks.
Tested on one 290x 1070/1250 the only thing using cpu is the cpp and not the actual process or mining
EDIT: if Bitcointalk still isn't showing the picture you can see it HERE
EDIT: if Bitcointalk still isn't showing the picture you can see it HERE
There was a bug in error-reporting functionallity.
If the miner displayed any kind of errors for you, please re-download it from the same url.
If the miner displayed any kind of errors for you, please re-download it from the same url.
Version 3.0 is available.
The mining speed is now 8.3 CPD on a 280x (clocks: 1040/1050) with almost no CPU usage.
This is a pool version. It should work with any pool supporting XPT protocol.
The miner works 80% of the time with the pool, and 20% it works solo. Upon finding a block when mining solo, 50% of its value go to dev.fee. (I.e. the miner has a 10% dev.fee)
The new version is available here:
http://primegpu.com/files/primegpu-pool.zip
Paid version (100% pool, no solo) is available for download from
http://primegpu.com/files/primegpu-pool-paid.zip
The miner has been tested with these pools:
xpm.minin.gs (Edit: seems to be down ATM):
primegpu-pool.exe -o xpm.minin.gs:10034 -u XPM_ADDRESS -p x
ypool.net:
primegpu-pool.exe -o ypool.net -u USERNAME -a XPM_ADDRESS -p x
Note:
- Catalyst 14.3+ is required
- you need to have the official primecoin wallet installed on the mining rig
- the blockchain should be updated prior to running the miner
- the wallet application must be closed when running the miner
The mining speed is now 8.3 CPD on a 280x (clocks: 1040/1050) with almost no CPU usage.
This is a pool version. It should work with any pool supporting XPT protocol.
The miner works 80% of the time with the pool, and 20% it works solo. Upon finding a block when mining solo, 50% of its value go to dev.fee. (I.e. the miner has a 10% dev.fee)
The new version is available here:
http://primegpu.com/files/primegpu-pool.zip
Paid version (100% pool, no solo) is available for download from
http://primegpu.com/files/primegpu-pool-paid.zip
The miner has been tested with these pools:
xpm.minin.gs (Edit: seems to be down ATM):
primegpu-pool.exe -o xpm.minin.gs:10034 -u XPM_ADDRESS -p x
ypool.net:
primegpu-pool.exe -o ypool.net -u USERNAME -a XPM_ADDRESS -p x
Note:
- Catalyst 14.3+ is required
- you need to have the official primecoin wallet installed on the mining rig
- the blockchain should be updated prior to running the miner
- the wallet application must be closed when running the miner
i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170
It's a single 7970, i.e. not a 5 card setup, right?clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170
for xpm i have them all in single cards setups
i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170
It's a single 7970, i.e. not a 5 card setup, right? clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170
its been almost a month since your last update and leaving us in the dark with no status update seems just wrong
Well, we don't have any news to report. We're still working on a new version.also u mean 7+ as claymores gets that on a 7970
I might have missed the new version. With 10.1 you had 6.6 (What are the clocks btw?):
make up to 6.6cpd on a 12 core mobo with 7970 5.9cpd on a dual
9.1cpd on 290x's
9.1cpd on 290x's
i have 1 7970 getting 6.6 but that cause its only a dual core anything higher it 7+
clocks from 1050 up on core dont change that much .1 or .2 the mem is the main factor 1170
its been almost a month since your last update and leaving us in the dark with no status update seems just wrong
Well, we don't have any news to report. We're still working on a new version.also u mean 7+ as claymores gets that on a 7970
I might have missed the new version. With 10.1 you had 6.6 (What are the clocks btw?):
make up to 6.6cpd on a 12 core mobo with 7970 5.9cpd on a dual
9.1cpd on 290x's
9.1cpd on 290x's
now i see he cant make it faster so he gave up and is all in on curecoin thats really messed up and he didnt hold to his promises either about going opensource i think he should just give back the xpm to every license holder at least since it seem he doesnt care about his customers
We don't do development for Curecoin. Mining Curecoin is less profitable than XPM with other miners, but we just don't feel like using other XPM miners on our rigs.It took us 3 months to develop the first version (1.2 CPD on a 280x). Spending more than a couple of weeks to go from 2.9 CPD into 6+ CPD is perfectly fine.
its been almost a month since your last update and leaving us in the dark with no status update seems just wrong
also u mean 7+ as claymores gets that on a 7970
now i see he cant make it faster so he gave up and is all in on curecoin thats really messed up and he didnt hold to his promises either about going opensource i think he should just give back the xpm to every license holder at least since it seem he does care about his customers
We don't do development for Curecoin. Mining Curecoin is less profitable than XPM with other miners, but we just don't feel like using other XPM miners on our rigs.It took us 3 months to develop the first version (1.2 CPD on a 280x). Spending more than a couple of weeks to go from 2.9 CPD into 6+ CPD is perfectly fine.
Jump to: