[RE-ANN] Galaxycoin Revival! KGW, POS/POW hybrid [TRADING ON CRYPTSY] - page 23.

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 01:10:55 PM

Unfortunately all attempts fail so far, when trying to use the downloaded blockchain it throws the above mentioned error, als redownloaded it and the same happens, on a clean install of the windows client it also stops at block 18924, exactly the same problem as the linux galaxycoind......

I am doing a sync right now; I will attempt to replicate the issues you are having and then go from there.

ADRIATICon

newbie

Activity: 25

Merit: 0

Quote from: ckoeber on March 13, 2014, 01:13:29 PM

Quote from: Spekske on March 13, 2014, 01:10:55 PM

Unfortunately all attempts fail so far, when trying to use the downloaded blockchain it throws the above mentioned error, als redownloaded it and the same happens, on a clean install of the windows client it also stops at block 18924, exactly the same problem as the linux galaxycoind......

I will try this myself on a separate computer and see how it goes.

From there I will see what instructions need to be added or changed.

FYI--I also just tried after a full Windows 8.1 system reboot to the same error.
Run As Adminstrator also didn't help.

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 01:10:55 PM

Unfortunately all attempts fail so far, when trying to use the downloaded blockchain it throws the above mentioned error, als redownloaded it and the same happens, on a clean install of the windows client it also stops at block 18924, exactly the same problem as the linux galaxycoind......

I will try this myself on a separate computer and see how it goes.

From there I will see what instructions need to be added or changed.

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 12:52:47 PM

Quote from: ADRIATICon on March 13, 2014, 12:41:19 PM

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

I have the same issue with the new windows client. When I try the blockchain download, I receive
"A fatal error occured. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22"

followed by "galaxycoin-qt.exe in Runaway exception."

Maybe that was my fault; try the download link for my Blockchain download again; I reuploaded it...

Then follow the steps as previously given before.

Unfortunately all attempts fail so far, when trying to use the downloaded blockchain it throws the above mentioned error, als redownloaded it and the same happens, on a clean install of the windows client it also stops at block 18924, exactly the same problem as the linux galaxycoind......

ckoeber

member

Activity: 182

Merit: 10

Quote from: ADRIATICon on March 13, 2014, 12:41:19 PM

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

I have the same issue with the new windows client. When I try the blockchain download, I receive
"A fatal error occured. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22"

followed by "galaxycoin-qt.exe in Runaway exception."

Maybe that was my fault; try the download link for my Blockchain download again; I reuploaded it...

Then follow the steps as previously given before.

ADRIATICon

newbie

Activity: 25

Merit: 0

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

I have the same issue with the new windows client. When I try the blockchain download, I receive
"A fatal error occured. Galaxycoin can no longer continue safely and will quit.
EXCEPTION: St13runtime_error
CDB() : can't open database file blkindex.dat, error 22"

followed by "galaxycoin-qt.exe in Runaway exception."

ckoeber

member

Activity: 182

Merit: 10

On my pool I see a lot of people connecting with old clients.

You need to update or you'll be sorry ...

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 11:57:21 AM

Well that's obvious, but I posted that message before the new windows client was uploaded

As long as you didn't actually use the old client yet then cool.

Once you get the new client set up (and backup your wallet.dat) then try my blockchain download (about 150 MB) with the instructions I posted and let everyone know how it goes.

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 11:50:30 AM

Quote from: Spekske on March 13, 2014, 11:38:01 AM

I'll give it a try in a moment using the old windows wallet and setting the .conf to connect to 71.4.209.204, who knows it might work

You have to use the new client!

The old client will load the blocks but it won't be on the new fork, etc.

You might even mess up any balance on your old wallet.

You have been warned!

Well that's obvious, but I posted that message before the new windows client was uploaded

ckoeber

member

Activity: 182

Merit: 10

Quote from: icecube45 on March 13, 2014, 11:40:19 AM

Uploading windows version!

https://mega.co.nz/#!7wxziYSa!kA0RUpyT04spvzpwxLKp7-a6v6npsEMhNYmEhMXVmro

When you update the original post I would just use addnode=71.4.209.204 (or other known 2.0 nodes) and a link to the blockchain file to help people sync.

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 11:38:01 AM

I'll give it a try in a moment using the old windows wallet and setting the .conf to connect to 71.4.209.204, who knows it might work

You have to use the new client!

The old client will load the blocks but it won't be on the new fork, etc.

You might even mess up any balance on your old wallet.

You have been warned!

icecube45

legendary

Activity: 1218

Merit: 1000

Uploading windows version!

https://mega.co.nz/#!7wxziYSa!kA0RUpyT04spvzpwxLKp7-a6v6npsEMhNYmEhMXVmro

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 11:33:04 AM

Quote from: Spekske on March 13, 2014, 11:11:56 AM

Quote

And you are using connect=71.4.209.204?

yes

Hmmm, what I can do is host the blockchain up until like the 250,000 block on a zip file.

I'll give it a try in a moment using the old windows wallet and setting the .conf to connect to 71.4.209.204, who knows it might work

ckoeber

member

Activity: 182

Merit: 10

Blockchain up until about block 250,000: http://galaxypool.chriskoeber.com/galaxycoinblockchain.zip

Close your GalaxyCoin client.

Then unzip the contents in your %appdata%\Galaxycoin directory.

Then reopen the NEW client.

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 11:11:56 AM

Quote

And you are using connect=71.4.209.204?

yes

Hmmm, what I can do is host the blockchain up until like the 250,000 block on a zip file.

*Sakura*

legendary

Activity: 1624

Merit: 1005

I wish you all love and profitable investments!!!

What is the annual interest rate?

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 11:08:24 AM

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

And you are using connect=71.4.209.204?

yes

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

And you are using connect=71.4.209.204?

icecube45

legendary

Activity: 1218

Merit: 1000

Quote from: Spekske on March 13, 2014, 10:41:38 AM

Quote from: icecube45 on March 13, 2014, 10:39:04 AM

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

Did you compile from the new source?

Yes, it says version v2.0.0.0

hmm... I'm going to get another addnode up

Spekske

hero member

Activity: 673

Merit: 506

Quote from: icecube45 on March 13, 2014, 10:39:04 AM

Quote from: Spekske on March 13, 2014, 10:27:01 AM

Quote from: ckoeber on March 13, 2014, 10:23:18 AM

Quote from: icecube45 on March 13, 2014, 10:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

Did you compile from the new source?

Yes, it says version v2.0.0.0

Topic: [RE-ANN] Galaxycoin Revival! KGW, POS/POW hybrid [TRADING ON CRYPTSY] - page 23. (Read 51784 times)