[RE-ANN] Galaxycoin Revival! KGW, POS/POW hybrid [TRADING ON CRYPTSY] - page 24.

icecube45

legendary

Activity: 1218

Merit: 1000

Quote from: Spekske on March 13, 2014, 09:27:01 AM

Quote from: ckoeber on March 13, 2014, 09:23:18 AM

Quote from: icecube45 on March 13, 2014, 09:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

Did you compile from the new source?

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 09:23:18 AM

Quote from: icecube45 on March 13, 2014, 09:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

I am still having issues with the galaxycoind that gets stuck on block 18924, I already deleted everything and started a clean blockchain download using connect=your ip address in the .conf to avoid getting other nodes, any ideas ?

ckoeber

member

Activity: 182

Merit: 10

Quote from: icecube45 on March 13, 2014, 09:21:16 AM

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Well, looks like you need to contact the exchanges and coinwars today

For the time being you should modify the addnodes on the original post to only use my node for now.

icecube45

legendary

Activity: 1218

Merit: 1000

Quote from: Spekske on March 13, 2014, 09:20:10 AM

Quote from: ckoeber on March 13, 2014, 09:10:31 AM

Quote from: Spekske on March 13, 2014, 09:09:01 AM

Quote from: ckoeber on March 13, 2014, 09:04:15 AM

Quote from: Spekske on March 13, 2014, 09:02:32 AM

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

I am on the new fork; the dev's form kicked in much earlier.

Not a big deal; I will put up my addnode shortly and people should, for the time being, sync against my setup.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Good idea, as soon as you have correct addnodes I'll change my setup

Done.

Folks, use THIS addnode to sync.

Make sure you are using the NEW client:

Code:

addnode=71.4.209.204

Also, until the exchanges (like Cryptsy) and Coinwars update their wallets you won't be able to exchange your coin.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Has the new windows wallet already been made available ? Maybe I just missed it...

Not yet.. Overnight my computer restarted to "install updates", thanks windows..

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 09:10:31 AM

Quote from: Spekske on March 13, 2014, 09:09:01 AM

Quote from: ckoeber on March 13, 2014, 09:04:15 AM

Quote from: Spekske on March 13, 2014, 09:02:32 AM

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

I am on the new fork; the dev's form kicked in much earlier.

Not a big deal; I will put up my addnode shortly and people should, for the time being, sync against my setup.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Good idea, as soon as you have correct addnodes I'll change my setup

Done.

Folks, use THIS addnode to sync.

Make sure you are using the NEW client:

Code:

addnode=71.4.209.204

Also, until the exchanges (like Cryptsy) and Coinwars update their wallets you won't be able to exchange your coin.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Has the new windows wallet already been made available ? Maybe I just missed it...

barryzand

hero member

Activity: 574

Merit: 500

Growcoin Chief

Quote from: ckoeber on March 13, 2014, 09:08:41 AM

Quote from: barryzand on March 13, 2014, 09:06:46 AM

so due to the fork, we cant send balance to cryptsy until they update?

Not right now; not until they update.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

k thnx... still got krugercoin stuck there as well... hope its not going to take 2 weeks before they update glx Undecided

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 09:09:01 AM

Quote from: ckoeber on March 13, 2014, 09:04:15 AM

Quote from: Spekske on March 13, 2014, 09:02:32 AM

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

I am on the new fork; the dev's form kicked in much earlier.

Not a big deal; I will put up my addnode shortly and people should, for the time being, sync against my setup.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Good idea, as soon as you have correct addnodes I'll change my setup

Done.

Folks, use THIS addnode to sync.

Make sure you are using the NEW client:

Code:

addnode=71.4.209.204

Also, until the exchanges (like Cryptsy) and Coinwars update their wallets you won't be able to exchange your coin.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 09:04:15 AM

Quote from: Spekske on March 13, 2014, 09:02:32 AM

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

I am on the new fork; the dev's form kicked in much earlier.

Not a big deal; I will put up my addnode shortly and people should, for the time being, sync against my setup.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Good idea, as soon as you have correct addnodes I'll change my setup

ckoeber

member

Activity: 182

Merit: 10

Quote from: barryzand on March 13, 2014, 09:06:46 AM

so due to the fork, we cant send balance to cryptsy until they update?

Not right now; not until they update.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

ckoeber

member

Activity: 182

Merit: 10

My pool is on the NEW Fork.

The dev's fork kicked in already instead of the later block.

Use THIS addnode to sync:

Code:

addnode=71.4.209.204

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

barryzand

hero member

Activity: 574

Merit: 500

Growcoin Chief

so due to the fork, we cant send balance to cryptsy until they update?

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 09:02:32 AM

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

I am on the new fork; the dev's form kicked in much earlier.

Not a big deal; I will put up my addnode shortly and people should, for the time being, sync against my setup.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 08:54:53 AM

Quote from: Spekske on March 13, 2014, 08:50:49 AM

Is your pool actually correct ? I see quite some differences in the current block being displayed by various pools, yours seems to be ahead of all others....

I installed the latest client per IceCube and soopy452000's work.

Not sure what else to tell you. Pool runs just like all of my other ones. No errors in logs, etc.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Was just wondering, most pools and coinwarz website state block 249716 as the current block, that doesn't mean they aren't wrong of course

I also can't get my wallet to sync, tried both windows and linux, windows version sits at 249716 and linux galaxycoind stops at 18xxx, the galaxycoind is the newest V2.0 by the way, downloaded and installed from github this morning, any ideas or suggestions would be appreciated Grin

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 08:50:49 AM

Quote from: ckoeber on March 13, 2014, 03:21:37 AM

Just a reminder of my pool address:

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

IceCube; you should put an indicator next to pools on the OP as to who updated their pools.

Is your pool actually correct ? I see quite some differences in the current block being displayed by various pools, yours seems to be ahead of all others....

I'll contact the devs, it seems their fork kicked in earlier than expected.

So I am mining the new fork it seems.

ckoeber

member

Activity: 182

Merit: 10

Quote from: Spekske on March 13, 2014, 08:50:49 AM

Is your pool actually correct ? I see quite some differences in the current block being displayed by various pools, yours seems to be ahead of all others....

I installed the latest client per IceCube and soopy452000's work.

Not sure what else to tell you. Pool runs just like all of my other ones. No errors in logs, etc.

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

Spekske

hero member

Activity: 673

Merit: 506

Quote from: ckoeber on March 13, 2014, 03:21:37 AM

Just a reminder of my pool address:

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

IceCube; you should put an indicator next to pools on the OP as to who updated their pools.

Is your pool actually correct ? I see quite some differences in the current block being displayed by various pools, yours seems to be ahead of all others....

icecube45

legendary

Activity: 1218

Merit: 1000

Quote from: ckoeber on March 13, 2014, 03:21:37 AM

Just a reminder of my pool address:

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

IceCube; you should put an indicator next to pools on the OP as to who updated their pools.

Will do!

Working out some kinks with the compilation of the windows client (dependency issues),

Should be done soon

ckoeber

member

Activity: 182

Merit: 10

Just a reminder of my pool address:

http://galaxypool.chriskoeber.com
0% fees, VARDIFF and Stratum support!

IceCube; you should put an indicator next to pools on the OP as to who updated their pools.

ckoeber

member

Activity: 182

Merit: 10

Here's my startup:

Code:

Galaxycoin version v2.0.0.0 (2014-03-13 13:10:29 +0530)
Using OpenSSL version OpenSSL 1.0.1f 6 Jan 2014
Startup time: 03/13/14 08:12:11
Default data directory [...]
Used data directory [...]
dbenv.open LogDir= [...]
Final lk_max_locks is 537000, sufficient for (worst case) 11 blocks in a single transaction (up to a 5-deep reorganization)
Bound to [::]:15521
Bound to 0.0.0.0:15521
Loading block index...
LoadBlockIndex(): hashBestChain=e30774f6fc4ee2a9fac1  height=249625  trust=38403828380702  date=03/13/14 07:16:45
LoadBlockIndex(): synchronized checkpoint 4e87a13c7a934e99199a0a95bf89df907e51fda701d4051e3f50d6bb55aaf8c8
Verifying last 2500 blocks at level 1
 block index          233943ms
Loading wallet...

And here is my GetInfo:

Code:

{
    "version" : "v2.0.0.0",
    "protocolversion" : 60008,
    "walletversion" : 60000,
    "balance" : [...],
    "newmint" : [...],
    "stake" : 0.00000000,
    "blocks" : 249625,
    "moneysupply" : 15092905.38120300,
    "connections" : 7,
    "proxy" : "",
    "ip" : [...],
    "difficulty" : 3.60984880,
    "testnet" : false,
    "keypoololdest" : 1394230389,
    "keypoolsize" : 102,
    "paytxfee" : 0.01000000,
    "errors" : ""
}

Theoretically I should be good.

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: ckoeber on March 13, 2014, 03:02:02 AM

Quote from: soopy452000 on March 13, 2014, 02:53:06 AM

Yes Mate. Do check it out as well.

I heard icecube is compiling windows and should be updating the thread with it.

Cheers!

I looked at it; didn't notice any errors that were obvious.

I did note that you bumped the version numbers high; that should be good for easy syncing and getting rid of errors.

Great Mate and thank you very much, aha yup thought we got to help people identify their running versions correctly.

Let's get this baby Rolling Shall we!

Topic: [RE-ANN] Galaxycoin Revival! KGW, POS/POW hybrid [TRADING ON CRYPTSY] - page 24. (Read 51820 times)