Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 31. (Read 104895 times)

hero member
Activity: 840
Merit: 1000
ZCVYIHWDO    2013-12-04  still pending any news on that ??

Hi Braindead, if Jeffrey waits for an order made on 2013-11-28, I'm not too surprised yours isn't sent yet.
BTW, waiting for 4 boards too, order paid on 2013-12-01, I'll post here when they'll be sent, so people can estimate when they can expect their orders.
advertised 4 weeks delay is over, too bad.
But remember that as always, crypto is a gamble.

order shipped yesterday.
full member
Activity: 182
Merit: 100
What date did you two order?

Mine was from 28-11-2013, it shipped 2 days ago.
I think Marto said they're done with "shipment december" orders in a few more days. It's always been more about promised shipment date (production batches) more than order dates.
legendary
Activity: 1600
Merit: 1014
Beginning of December
member
Activity: 115
Merit: 10
What date did you two order?
legendary
Activity: 1600
Merit: 1014
Just got tracking for my "december delivery" order
full member
Activity: 147
Merit: 100
Just received shipping and tracking information this morning.  Will report back when it arrives. Cheesy
hero member
Activity: 728
Merit: 500
MARTO?? I am still waiting for your answer.  Huh Undecided


A few minutes ago I got an email about my second order.
"
Message:
Your order is ready to send. Please organize your transport.
"
It is OK! So HOW CAN I PAY FOR?  If you give me your Paypal adress or Bankwire then i will send the  shippment cost:) It would be great for you?


If we missed this the second one will be on our account
Smiley
It is night here if the other order is December it will be out tommorow
newbie
Activity: 32
Merit: 0
MARTO?? I am still waiting for your answer.  Huh Undecided


A few minutes ago I got an email about my second order.
"
Message:
Your order is ready to send. Please organize your transport.
"
It is OK! So HOW CAN I PAY FOR?  If you give me your Paypal adress or Bankwire then i will send the  shippment cost:) It would be great for you?


If we missed this the second one will be on our account
full member
Activity: 182
Merit: 100
Today I received my shipping ID for 5x hex16a2, ordered and paid on 28-11-13
(just so you guys have an idea where about they are with catching up)
newbie
Activity: 32
Merit: 0
A few minutes ago I got an email about my second order.
"
Message:
Your order is ready to send. Please organize your transport.
"
It is OK! So HOW CAN I PAY FOR?  If you give me your Paypal adress or Bankwire then i will send the  shippment cost:) It would be great for you?


If we missed this the second one will be on our account
hero member
Activity: 728
Merit: 500
If we missed this the second one will be on our account
newbie
Activity: 32
Merit: 0
Dear Technobit and Marto,

I am writing because I ordered 2x3 boards from your company and I got an email with shipment.
It is great news Smiley but I have a little problem. I wrote an email to you a few days ago , because I have 2 orders, and I wanted to these orders to merge.

SNOUOBCFN  2013-12-04  927,90€  bitpay  Payment accepted  Invoice PDF  details Reorder

I got an email about this order, but what is about my second order?

I asked from you PLEASE MERGE THIS 2 ORDERS TO 1 BECAUSE I PAID ONLY ONE SHIPPING COST: BETWEEN 2 Orders are about 1 hours different.  

VUMCRQDKX  2013-12-04  899,90€  bitpay  Payment accepted  Invoice PDF  details Reorder

IT IS THE OTHER WHAT I DID NOT PAID SHIPMENTCOST.

I ASK AGAIN!! PLEASE MERGE MY ORDERS TO SAME PACKAGE:  THANK YOU! Wink
IF THE MERGE IS NOT POSSIBLE, THEN HOW CAN I PAY THE SHIPPING COST TO MY SECOND ORDER? (VUMCRQDKX)
WAITING FOR YOUR EARLIEST POSSIBLE ANSWER.
REGARDS

Benyus16
legendary
Activity: 1610
Merit: 1000
Hey there everyone!
I am so close but there is still something going wrong.


Anyone know why this happens?
Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Other thing
a common mistake that I have with some customers.
If your boards are with wire terminal did you happened to connect the red wire to + and black to - GND?
If so change it to
Yellow + and Black - GND.
If this is not the case , please excuse me I was not intending to offend you.

Best Martin

Hi Martin,
Thanks for the support!
I have the molex connector so that shouldnt be a problem.
I will be plugging in the boards one by one tonight to see what happens.

The ATX supply is running correct right (PSU fan spinning etc)? The devices themselves will be picked up by cgminer and have there fans spin purely on USB connection. I found them like this once when my psu decided to take a nap.
Yeah when there is no 12V supplied to the boards they do take a nap same like PSu
newbie
Activity: 49
Merit: 0
Hey there everyone!
I am so close but there is still something going wrong.

http://i41.tinypic.com/96bwxs.png
Anyone know why this happens?
Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Other thing
a common mistake that I have with some customers.
If your boards are with wire terminal did you happened to connect the red wire to + and black to - GND?
If so change it to
Yellow + and Black - GND.
If this is not the case , please excuse me I was not intending to offend you.

Best Martin

Hi Martin,
Thanks for the support!
I have the molex connector so that shouldnt be a problem.
I will be plugging in the boards one by one tonight to see what happens.

The ATX supply is running correct right (PSU fan spinning etc)? The devices themselves will be picked up by cgminer and have there fans spin purely on USB connection. I found them like this once when my psu decided to take a nap.
sr. member
Activity: 452
Merit: 250
Hello

My last order has been send Wink

Your order with the reference ZCVYIHWDO is currently in transit..

Day 05/12

Great news
legendary
Activity: 1610
Merit: 1000
Thanks to Everybody!!!!!
 I got the TP Link which I pre flashed from amazon.  Bought an extra one just in case I bricked it. After reading everything on the forums.... Putty and Miners working just fine and HASHING!
Super
Happy mining!
sr. member
Activity: 440
Merit: 250
Thanks to Everybody!!!!!
 I got the TP Link which I pre flashed from amazon.  Bought an extra one just in case I bricked it. After reading everything on the forums.... Putty and Miners working just fine and HASHING!
legendary
Activity: 1610
Merit: 1000
Hey there everyone!
I am so close but there is still something going wrong.


Anyone know why this happens?
Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Had some similiar behavior as I attached two HEX16A2 with Sata to Molex adapters to my current PSU.
As it turned out, the Sata To Molex Adapter was touching the board and could not be inserted completly.
A knife and some minor tweaks to the adapters and everything is working fine.

Maybe you could check, if this might be the case with your setup, too. Smiley

Nice but be careful each board eats a lot of amps clocked so it is not a good idea for sure to use the adapters
legendary
Activity: 1190
Merit: 1000
From my 4 units i have 2 units not working, they are not even detected via computer neither tp-link router, anyone can help me here ?? Is there something i can do to fix in order not to send them back for swap or technobit to fix ? It will take ages



If that 2 unit not detected if connect directly to PC or router then you got faulty unit.
You need to ask marto for assistant then  Sad
legendary
Activity: 1190
Merit: 1000
I have received package with my order. Thanks. Waiting for the Coincraft hex board to order again.

Gratz  Grin

So which courier speedy used?
Pages:
Jump to: