Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 33.

marto74

hero member

Activity: 728

Merit: 500

Quote from: newminer1988 on January 09, 2014, 05:46:17 AM

Quote from: loshia on January 09, 2014, 12:23:18 AM

Quote from: newminer1988 on January 08, 2014, 04:57:03 PM

Hey there everyone!
I am so close but there is still something going wrong.

Anyone know why this happens?

Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Other thing
a common mistake that I have with some customers.
If your boards are with wire terminal did you happened to connect the red wire to + and black to - GND?
If so change it to
Yellow + and Black - GND.
If this is not the case , please excuse me I was not intending to offend you.

Best Martin

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: newminer1988 on January 09, 2014, 05:46:17 AM

Quote from: loshia on January 09, 2014, 12:23:18 AM

Quote from: newminer1988 on January 08, 2014, 04:57:03 PM

Hey there everyone!
I am so close but there is still something going wrong.

Anyone know why this happens?

Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

Cool just pls try one board first connected into tplink directly to avoid hub issues

newminer1988

newbie

Activity: 43

Merit: 0

Quote from: loshia on January 09, 2014, 12:23:18 AM

Quote from: newminer1988 on January 08, 2014, 04:57:03 PM

Hey there everyone!
I am so close but there is still something going wrong.

http://i41.tinypic.com/96bwxs.png
Anyone know why this happens?

Are the boards powered 12v? Doubble check it pls

I have a corsair rm750 connected to the boards.
I am retrying everything again tonight i'll seewhat happens otherwise i'll set up TW.

benyus16

newbie

Activity: 32

Merit: 0

It would be great an Informationpackage again from technobit? Right? Huh

Quote from: dave111223 on January 09, 2014, 12:04:04 AM

Quote from: elchorizo on January 08, 2014, 07:39:21 PM

Can't wait anymore. Asked for an status update on 12/12/2013, another one on 12/31/2013 -- not counting the requests here and not a single reply or response. I won't reward a company that lies to and ignores its customers.

I filed a paypal dispute today for a refund. Good luck to you guys who are waiting but this is ridiculous.

Lucky. I paid these scammers with bitcoins. The most I can do is bash Marto74 and technobit as much as possible. Hopefully that will hurt their bottom line in the future.

I think i'll make it my new years resolution to post a negative comment somewhere online about them everyday.

Destiffmast

full member

Activity: 125

Merit: 100

Quote from: J4bberwock on January 08, 2014, 01:16:49 PM

Quote from: Destiffmast on January 08, 2014, 04:48:48 AM

I wonder if anyone try mine another Sha coin with these boards, would it work? Say PPC for example?

Of course it works. I'm mining Freicoin with the first one I received. Still no answer from Technobit that have sent me hex16A 7Gh/s instead of HEX16A2 24Gh/s

Cool glad to know it :-)

Think will give PPC a go then, with 24ghs minin Bitcoin will take a long time to get a ROI.

Hopefully will have no bother connecting it on windows 7, according to tacking arrives today :-)

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: newminer1988 on January 08, 2014, 04:57:03 PM

Hey there everyone!
I am so close but there is still something going wrong.

Anyone know why this happens?

Are the boards powered 12v? Doubble check it pls

dave111223

legendary

Activity: 1190

Merit: 1001

Quote from: elchorizo on January 08, 2014, 07:39:21 PM

Can't wait anymore. Asked for an status update on 12/12/2013, another one on 12/31/2013 -- not counting the requests here and not a single reply or response. I won't reward a company that lies to and ignores its customers.

I filed a paypal dispute today for a refund. Good luck to you guys who are waiting but this is ridiculous.

Lucky. I paid these scammers with bitcoins. The most I can do is bash Marto74 and technobit as much as possible. Hopefully that will hurt their bottom line in the future.

I think i'll make it my new years resolution to post a negative comment somewhere online about them everyday.

elchorizo

full member

Activity: 236

Merit: 100

Can't wait anymore. Asked for an status update on 12/12/2013, another one on 12/31/2013 -- not counting the requests here and not a single reply or response. I won't reward a company that lies to and ignores its customers.

I filed a paypal dispute today for a refund. Good luck to you guys who are waiting but this is ridiculous.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: newminer1988 on January 08, 2014, 04:57:03 PM

Hey there everyone!
I am so close but there is still something going wrong.

........................................
Anyone know why this happens?

Are you sure that your PSU is supplying power to HEX16C? Did the fan spin? Did red LED lit or blinking?
It's would be helpful if you can give us SS of cgminer configuration page.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: blitzwilli1 on January 08, 2014, 09:55:25 AM

can I set up a cron that every xxx minutes cgminer to restart?
because mining speed is always less

I use 0 8 * * * * reboot to reboot the router every day at 8 am when using 0.0.5 image(cgminer3.6.4).
But since 0.0.6(cgminer3.8.1) it's not require anymore.

marto74

hero member

Activity: 728

Merit: 500

Quote from: newminer1988 on January 08, 2014, 05:55:51 PM

Quote from: marto74 on January 08, 2014, 05:39:47 PM

most probaly problrm with the USB hub.
Also in the web interface change the defaut miner to HEXC

Which web interface on the router or on cgminer?
Do i need to buy a different usbhub?

can you give e TW to a PC inside your network
or just connect 1 board directly to router

newminer1988

newbie

Activity: 43

Merit: 0

Quote from: marto74 on January 08, 2014, 05:39:47 PM

most probaly problrm with the USB hub.
Also in the web interface change the defaut miner to HEXC

Which web interface on the router or on cgminer?
Do i need to buy a different usbhub?

marto74

hero member

Activity: 728

Merit: 500

most probaly problrm with the USB hub.
Also in the web interface change the defaut miner to HEXC

newminer1988

newbie

Activity: 43

Merit: 0

Hey there everyone!
I am so close but there is still something going wrong.

http://i41.tinypic.com/96bwxs.png
Anyone know why this happens?

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: newminer1988 on January 08, 2014, 12:44:47 PM

My MR3020 does nothing.
Who can help met out? When i plug in my Tplink router that i bought from technobit my computer doesnt recognise it.
The power light and wps/reset go on but thats it. I hook up the router to my laptop and nothing...
On which setting do you have your router? 3g/4g or wisp or AP?
Getting tired of trying to problem solve Technobit equiment.

Edit: The person that helps me solve all my hex16a2 and mr3020 problems tonight i will reward with my first day of earning from mining. I will be online again in 3 hours PM me if you want to help.

I can help you out for free drop me a note if I am online an fire your teamwiver

J4bberwock

hero member

Activity: 840

Merit: 1000

Quote from: Destiffmast on January 08, 2014, 04:48:48 AM

I wonder if anyone try mine another Sha coin with these boards, would it work? Say PPC for example?

Of course it works. I'm mining Freicoin with the first one I received. Still no answer from Technobit that have sent me hex16A 7Gh/s instead of HEX16A2 24Gh/s

newminer1988

newbie

Activity: 43

Merit: 0

My MR3020 does nothing.
Who can help met out? When i plug in my Tplink router that i bought from technobit my computer doesnt recognise it.
The power light and wps/reset go on but thats it. I hook up the router to my laptop and nothing...
On which setting do you have your router? 3g/4g or wisp or AP?
Getting tired of trying to problem solve Technobit equiment.

Edit: The person that helps me solve all my hex16a2 and mr3020 problems tonight i will reward with my first day of earning from mining. I will be online again in 3 hours PM me if you want to help.

blitzwilli1

newbie

Activity: 45

Merit: 0

can I set up a cron that every xxx minutes cgminer to restart?
because mining speed is always less

Quote from: Zich on January 07, 2014, 07:37:58 PM

Quote from: blitzwilli1 on January 07, 2014, 07:32:21 PM

what I am but wonder

when I log in (mr-3020)
under Status
Am I missing "status cgminer"

Yes, but not only you. All image from technobit come with no cgminer status Grin

since all available on cgminer api log

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: stan258 on January 08, 2014, 05:18:56 AM

I tried:

Hello,

When the parcel reaches the final destination we will be able to give you the reference number and the name of the local agent.
It is still too early for this kind of information to be provided.
I am very sorry if any inconvenience caused.

Best regards,

Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001

Your parcel should be arrived on friday if it really already leave sofia. Let's see in two more days.

stan258

sr. member

Activity: 440

Merit: 250

Quote from: Zich on January 08, 2014, 04:48:05 AM

Quote from: stan258 on January 08, 2014, 04:18:44 AM

Ya she would not give me the final destination company or tracking.

Some people reporting that they received second tracking number from speedy. You can try to ask her Grin

I tried:

Hello,

When the parcel reaches the final destination we will be able to give you the reference number and the name of the local agent.
It is still too early for this kind of information to be provided.
I am very sorry if any inconvenience caused.

Best regards,

Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 33. (Read 104914 times)