Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 39. (Read 104895 times)

newbie
Activity: 32
Merit: 0
Marto!?

Can you give us some information about shipping? You told us lots of information while they were break promises.... Sad
I think lost of customer are not satisfied with your service and support so you have to change your business policy because you will lose your customers.

VUMCRQDKX  2013-12-04  899,90€  bitpay  Payment accepted  Invoice PDF  details Reorder
SNOUOBCFN  2013-12-04  927,90€  bitpay  Payment accepted  Invoice PDF  details Reorder

Best Benyus16
legendary
Activity: 1190
Merit: 1000
Anyone can help me here ??

Happened today

When i try to acess ssh to tp-link router i make "screen -r" and it always shows black screen Huh? How to solve this ??


Maybe the router hang, it's happen sometimes. Just restart the router & miner.
legendary
Activity: 1190
Merit: 1000

Are these 5v or 12v as the page did not have the information? Also is the noise difference that noticeable?

One last question what are you using for PSU as i have one powered by a bench supply (loud) and another on an old ATX PSU (Quiet). Waiting on some adapters so i can use ATX supply for both, it has a 36amp 12 v rail so should handle both fine and i'm  planning to use the another 12v connection as the molex wires are a little warm already.

Yup, the fan use 12 V, i just surprised that big name like Zalman had very little information on their site. And yeah, the noise is about half of SUNON.

I use Seasonic M12II Bronze 620W
sr. member
Activity: 452
Merit: 250
Anyone can help me here ??

Happened today

When i try to acess ssh to tp-link router i make "screen -r" and it always shows black screen Huh? How to solve this ??
member
Activity: 86
Merit: 10
Are these 5v or 12v as the page did not have the information? Also is the noise difference that noticeable?

12V!
newbie
Activity: 49
Merit: 0
After searching for 2 day, i found FAN that at least half of SUNON PF92251v1-000U-S99 performance & available in local computer store.
My first choice is Zalman ZM-F2 Plus but not available at the moment. So i buy Zalman ZM-F2 LED which is more expensive because of the useless LED.

So, now HEX16A2 move to bedroom joining 2 x HEX16A on TPLINK TL-MR3020  Grin

http://s26.postimg.org/5lu89igax/putty.jpg

Are these 5v or 12v as the page did not have the information? Also is the noise difference that noticeable?

One last question what are you using for PSU as i have one powered by a bench supply (loud) and another on an old ATX PSU (Quiet). Waiting on some adapters so i can use ATX supply for both, it has a 36amp 12 v rail so should handle both fine and i'm  planning to use the another 12v connection as the molex wires are a little warm already.
newbie
Activity: 32
Merit: 0
LIARS!!!!!! Angry

I was promised shipping within 7-10 business days when I placed my order on Nov 28th, WVVOPNUWT.
I was then promised by email that my order would ship by Dec 27th / 30th.

2 false hopes.
No tracking.
Ton of lost hashing.
FUN TIMES.
full member
Activity: 122
Merit: 100
I was promised shipping within 7-10 business days when I placed my order on Nov 28th, WVVOPNUWT.
I was then promised by email that my order would ship by Dec 27th / 30th.

2 false hopes.
No tracking.
Ton of lost hashing.
FUN TIMES.
full member
Activity: 147
Merit: 100
so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these Angry


Yeah. Then again none are really shipping or with any better prices. :/

Had a bad taste of BFL delays before. I don't want that to repeat again. 
hero member
Activity: 728
Merit: 500
Thank you for the good wishes.
We'll try to make it better for all our customers in the New 2014
Have a Happy New Year
newbie
Activity: 49
Merit: 0
Happy New Year 2014

My wishes for you,

First get your order from Technobit

Great Mining start for Jan,

Love for Feb, peace for March,

No worries for April, fun for May,

Joy for June to Nov,

happiness for Dec.

and be sure to Change your Business in 31 of December.

Have a lucky and wonderful 2014 with a lot and a lot of Bitcoin

Bestalg
[/color]
full member
Activity: 125
Merit: 100
so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these Angry


No news on this end either, all I get is the same old

Date    Status
2013-11-28 15:50:25    Payment accepted......
member
Activity: 92
Merit: 10
so has anyone got shipping info today, it being the last day of the month for December shipping?

My order still just shows as payment accepted.
I also notice that Technobit have not replyed to this thread for a while and have not replyed to my messages on there web site.

I realy am begining to wish I had not ordered these Angry
legendary
Activity: 1190
Merit: 1000

Super!
I wish I could see your nanos also mining at same host Wink
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90%  Cry
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot  Smiley
True CPU goes high but nothing to fear about I do have 7 hexa +2 nanos all working great without performance lost

I had unused pi so i let's the nano hashing there  Grin
I also had android tablet with LCD problem, i will try to add linux & install cgminer. Then run all board there  Grin
legendary
Activity: 1610
Merit: 1000

Super!
I wish I could see your nanos also mining at same host Wink
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90%  Cry
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot  Smiley
True CPU goes high but nothing to fear about I do have 7 hexa +2 nanos all working great without performance lost
legendary
Activity: 1190
Merit: 1000

Super!
I wish I could see your nanos also mining at same host Wink
You can clock a little bit more your A2 for 23 GH if you wish

The nano make CPU usage up to 90%  Cry
Since i change the fan with less static air pressure, then i fear add more clock will make the chip too hot  Smiley
legendary
Activity: 1610
Merit: 1000
After searching for 2 day, i found FAN that at least half of SUNON PF92251v1-000U-S99 performance & available in local computer store.
My first choice is Zalman ZM-F2 Plus but not available at the moment. So i buy Zalman ZM-F2 LED which is more expensive because of the useless LED.

So, now HEX16A2 move to bedroom joining 2 x HEX16A on TPLINK TL-MR3020  Grin


Super!
I wish I could see your nanos also mining at same host Wink
You can clock a little bit more your A2 for 23 GH if you wish
legendary
Activity: 1610
Merit: 1000
braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  Huh

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work Cheesy Cheesy many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower


Congrtas,
And learn your lesson always use a single power from psu with common ground Wink
legendary
Activity: 1190
Merit: 1000
braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  Huh

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work Cheesy Cheesy many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower



Great  Grin
sr. member
Activity: 452
Merit: 250
braindead, if you want to buy powered usb hub for this, buy cheap no brand usb hub. They work better, i don't know why  Huh

I use this 7 port usb hub or buy something like this 10 port usb hub

I made it work Cheesy Cheesy many many tks for all the help

I´ve powered the router throught the PSU so my hub now is working great and all my 3 hex16a and my 2 hex16a2 are now detected and minning   wwwwweeeeee

Still waiting for my other 8 units of hex16a2 to arrive to connect them also, we have to moove fast because difficulty is getting higher and the chances for ROI are getting lower

Pages:
Jump to: