Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 38. (Read 104895 times)

newbie
Activity: 43
Merit: 0
Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?


Too bad if win 7 not working with you because it's the easiest way.

The TL-MR3020 come with ip 192.168.0.99. You need to configure password, ssh , date , time, timezone, then cgminer configuration or network if you want.
Do it all slowly, wait until all saving process done before closing browser tab.

The FAN is the best available now so no need to change unless you really need to.

Ah should be a piece of cake :S hehe
what should i use for ssh?
legendary
Activity: 1190
Merit: 1000
Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?


Too bad if win 7 not working with you because it's the easiest way.

The TL-MR3020 come with ip 192.168.0.99. You need to configure password, ssh , date , time, timezone, then cgminer configuration or network if you want.
Do it all slowly, wait until all saving process done before closing browser tab.

The FAN is the best available now so no need to change unless you really need to.
legendary
Activity: 1190
Merit: 1001
No product, no refund, no contact via website, no contact via forum post, no contact via PM.

What a joke of a company; time to open up a scam thread on these guys I think....warning people not to buy from this website.
legendary
Activity: 1190
Merit: 1000

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation. Wink


Thanks and we all hope to see your company improve through out the new year.

Tyler.

Sound like BFL Jody blog update  Roll Eyes
newbie
Activity: 43
Merit: 0
Hi!
I have been trying to get a board working on my laptop (win7) but no luck so far.
edit: no LED is lighting up on the board the board is being powered by a corsair rm750 is this correct??

I have received the tplink router with technobit firmware and tomorrow I want to connect four boards to it.
Does anyone have a tutorial for how i should do this?
Do i have to change the fan that is supplied with boards?
member
Activity: 115
Merit: 10
Dear, firends,
We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .
Nanofuries We send again some orders today and due to some productiondelays , there are still orders that are late.
We are scheduling production
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
We almost can not wait for the first samples of Coincraft A1 chips in order to test our desighn.
 
Wishing you Happy new year.

Technobit team

Hey Marto,

If you could share slightly more information to set peoples mind at ease might be good and calm people down. We all understand delays, But maybe once ever couple working days you could come on here and post exactly what order date you have shipped between the last update and the time you make the post.

Something in the form of:

Hi postage update for the 4/01/2014

Posted all orders made on 1/12/2013
-------------------------------------

Hi postage update for the 7/01/2014

Posted all orders up to and including the 5/12/2013
----------------------------------------------------

Something like that small of an update will put a lot of people at ease. Most of your updates are very indecisive. If we have learnt anything from previous unmentioned companies indecisive is a very very bad thing for your reputation. Wink


Thanks and we all hope to see your company improve through out the new year.

Tyler.
member
Activity: 92
Merit: 10
We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .

All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Hello,

i have a December order for the Hex16A and i didn't got any email from you and i cannot see a changed status on my order info at the technobit.eu user backend. Can you please reply to emails? A few words are better then just silence.

Thank You

tell me about it
newbie
Activity: 23
Merit: 0
We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .

All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
Hello,

i have a December order for the Hex16A and i didn't got any email from you and i cannot see a changed status on my order info at the technobit.eu user backend. Can you please reply to emails? A few words are better then just silence.

Thank You
hero member
Activity: 728
Merit: 500
Dear, firends,
We stareted shipping again the left orders with December shiping both  Hex16a2 (c) and Hex16b orders and some Hex16a
Unfortunately we still on  December orders .
Nanofuries We send again some orders today and due to some productiondelays , there are still orders that are late.
We are scheduling production
All DPD sendings can be tracked in our Local representative's page here http://www.speedy.bg/begin.php?page=web_Tracking&lang=en
All customers with faulty units Just return them to sending addres and We'll send you replacement/repaired unit .
We almost can not wait for the first samples of Coincraft A1 chips in order to test our desighn.
 
Wishing you Happy new year.

Technobit team
member
Activity: 92
Merit: 10

Order Number GWBZVQOAS

If this order does not ship today Friday 03 2014 then I want a full refund in BTC to

1JLZ1m82m9qQN1yxAMQcT9CZa8K6TpWATE
member
Activity: 92
Merit: 10
So has anyone heard anything from op since the post on new year? Scam is becoming more and more likely on the December delivery to me

What ever happened to under promiss over deliver?
newbie
Activity: 32
Merit: 0
legendary
Activity: 1610
Merit: 1000
Mine keep hashing at ~20gh/s. What are good settings for overclocking?
1.1 v not more and 1500 clock
At1.1 you will get about 23-24 GH but power consumption increases
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
Mine keep hashing at ~20gh/s. What are good settings for overclocking?
newbie
Activity: 14
Merit: 0
member
Activity: 92
Merit: 10
Thank you for the good wishes.
We'll try to make it better for all our customers in the New 2014
Have a Happy New Year

So you have time to post the above but not to answer your customers?

WTF is going on. December delivery was promised it is now January so where is my stuff and where is the compensation?

Answering the mail is sent via your scam shop web site would be good to
legendary
Activity: 1190
Merit: 1001
Requested a refund for RGUSYBPJB, as it was not shipped in December as per the product description.

When will you issue this refund?
legendary
Activity: 1610
Merit: 1000
Anyone can help me here ??

Happened today

When i try to acess ssh to tp-link router i make "screen -r" and it always shows black screen Huh? How to solve this ??

1. Check your network if pool is dead that is the root cause
2. Usb Issues
hero member
Activity: 583
Merit: 500
Ok  simply put, what can we expect in compensation for delayed order when it has gone past december deadline?

any answer would do. it wasnt just cash it was btc taken which could be doing something for me elswhere.
Pages:
Jump to: