Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 41. (Read 104895 times)

member
Activity: 92
Merit: 10
so any news on these.
My order still only shows as payment accepted.

If these have not gone to production it is very unlikly that they will be shiped out befor the new year so....Technobit.....
what comp you going to offer?
full member
Activity: 125
Merit: 100
@Marto

My order is from the 28 of November and still not shipped, yet there are people here with orders placed after claiming they have already received their order! How can this happen?
newbie
Activity: 32
Merit: 0
Dear Marto!

You wrote that "We'll continue shipping on 30-th of December , but most probably there still be some late December orders that will be left for shipping in the 1-st week of January." . Today is 30th of december and i have NOT got email from you AGAIN with shipment number!

When will you ship?? or what was the last order date what you sent?

Thanks!
member
Activity: 77
Merit: 10
hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection
You cant use the same IP at once. Please connect directly to the "miner"-router and set a diffrent one.
But assure that your pc is in same network (192.168.1.x) because this router shouldnt DHCP and so the PC didnt get an IP automaticly.

I never said that it has the same ip as main router, only said that the scan shows the same ip of "miner" router as my internet router shows. I understand that two devices in the same network can't have the same ip. But regardless of that, i can't connect as I already mentioned, neither with satic ip nor with dhcp (my network has a 192.168.0.xxx -255 range)
member
Activity: 86
Merit: 10
hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection
You cant use the same IP at once. Please connect directly to the "miner"-router and set a diffrent one.
But assure that your pc is in same network (192.168.1.x) because this router shouldnt DHCP and so the PC didnt get an IP automaticly.
member
Activity: 77
Merit: 10
my ip is 192.168.0.23

Hi stifla,
please use a IP scanner to scann your network and find out the ip of the tp-link router. After you have find the IP you can connect to the router an set a new IP.
But think about, if you change settings in the webinterface you have to save them first then you can apply them.
If you change the site or click apply without saving first all changes are lost.
http://www.advanced-ip-scanner.com/de/
hi,
I already tried to scan the network, same ip as on main router.
also tried failsafe mode (sets router to failsafe mode and ip 192.168.1.1 to flash via telnet the factory image) = no success to get a connection
member
Activity: 86
Merit: 10
my ip is 192.168.0.23

Hi stifla,
please use a IP scanner to scann your network and find out the ip of the tp-link router. After you have find the IP you can connect to the router an set a new IP.
But think about, if you change settings in the webinterface you have to save them first then you can apply them.
If you change the site or click apply without saving first all changes are lost.
http://www.advanced-ip-scanner.com/de/
member
Activity: 86
Merit: 10
Any solutions on this?
The solutions is o use the right settings:
newbie
Activity: 29
Merit: 0
http://s22.postimg.org/zfyyqmoo1/hex.jpg

When I click the start button, a red/orange led on the hex16a2 starts burning, the "work age" starts running, but no hashing occurs.
It's connected to a Corsair 430 watt PSU (30A on 12v) with nothing else attached to it, so that should be OK. (and yes, PSU is running by connecting the green and a black wire on the 24p plug)
I've tried 2 different USB cables, both didn't work.
The user on BTC guild works, I'm using the same (but with _1, this one is _2) for my AntMiner and it works fine.

I'm just confused about the proxy window, it shows all kinds of errors but they don't really make sense to me.... help help please

Any solutions on this?
legendary
Activity: 1190
Merit: 1000
my ip is 192.168.0.23

Hmmm, sorry dude, i had no clue to solve this.
member
Activity: 77
Merit: 10
my ip is 192.168.0.23
legendary
Activity: 1190
Merit: 1000


But you can not access the router from web interface or ssh?
can you ping the address?

no access via web, no ping and no ssh, I can't even get in failsafe mode

What is your PC IP adddress?
member
Activity: 77
Merit: 10


But you can not access the router from web interface or ssh?
can you ping the address?

no access via web, no ping and no ssh, I can't even get in failsafe mode
legendary
Activity: 1190
Merit: 1000

Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.

Ok, got it now.
I see the ip address of the router is 192.168.0.30, but I am not able to connect, neither do I see any outgoing connection from cgminer

But you can not access the router from web interface or ssh?
can you ping the address?
member
Activity: 77
Merit: 10

Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.

Ok, got it now.
I see the ip address of the router is 192.168.0.30, but I am not able to connect, neither do I see any outgoing connection from cgminer
legendary
Activity: 1190
Merit: 1000
Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  Grin




Looks good Wink


Yup, overall only consume additional 5% memory from host.
So i will let it run there for a while  Grin
legendary
Activity: 1610
Merit: 1000
Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  Grin




Looks good Wink
legendary
Activity: 1190
Merit: 1000
Trying cgminer 3.8.5 on ubuntu using virtualbox under WIN 7 64bit  Grin



legendary
Activity: 1190
Merit: 1000


I mean what is the new IP you trying to set when you click save. But if you only click save not save & apply then the ip should still 192.168.0.99.

But then i am confuse, how did you connect to the internet? You should had modem, and router if had several PC ?

I was trying to set 192.168.0.30.
The plan was, that the router connects to my internet wifi router as client.

I wasn't connected to internet while i was setting up the tp-link, all local and I downloaded the firmware image before.


Ok, now connect the TL-MR3020 to your wifi router. You should be able see the statistic on you wifi router since the cgminer will trying to connect to pool.
hero member
Activity: 854
Merit: 500
Handed in a refund request.  A January shipment is no good to me; will never ROI.

Sounds like a Pre-order scam

You order then he tries to get the parts, sometimes he delivers, sometimes not.
Pages:
Jump to: