Nice, let's see how long it takes to confirm, haha.
I hope you're synced already
It said I was then I restarted the wallet, now I'm not. Wtf.
Topic: Rebranded to Duality Blockchain Solutions - page 18. (Read 129296 times)
I hope you're synced already
It said I was then I restarted the wallet, now I'm not. Wtf.
ttoroie -
I see that you have a SLK donation address in your signature. Why not register your name by using the wallet and accept SLK by using ttoroie instead?
Go to DNS in your wallet
enter your name
duration of service
preferred value (much like an address label i.e. receivables)
enter your SLK address if you want to connect your name to an existing address
and hit submit
for a fee of 0.01 SLK/day you can now use your name and your slk address to receive donations.
I see that you have a SLK donation address in your signature. Why not register your name by using the wallet and accept SLK by using ttoroie instead?
Go to DNS in your wallet
enter your name
duration of service
preferred value (much like an address label i.e. receivables)
enter your SLK address if you want to connect your name to an existing address
and hit submit
for a fee of 0.01 SLK/day you can now use your name and your slk address to receive donations.
Hello, I have a clean installation of silk-core (https://github.com/SilkNetwork/Silk-Core) in a new Ubuntu installation and working fine an its synced with the same block height as the explorer https://slkexplorer.silknetwork.org/
I am now stuck with the wallet, where can I find the basic commands? see the address of my wallet or create wallet, encrypt wallet. I know and I used: silk-cli help and silk-cli getwalletinfo but it doesn't say much. And then how to do coin splitting/coin control.
All of this with command line please. I have no gui installed. Tnx !!
I am now stuck with the wallet, where can I find the basic commands? see the address of my wallet or create wallet, encrypt wallet. I know and I used: silk-cli help and silk-cli getwalletinfo but it doesn't say much. And then how to do coin splitting/coin control.
All of this with command line please. I have no gui installed. Tnx !!
Im not familiar with a linux environment but "help" and "getwalletinfo" are valid commands.
Guys
you'll be laughing now but in the new Silk(SLK) wallet:
with all the swapping, transfers from weaver, Bittrex and split coins to stake....
I don't know what is my current Silk(SLK) wallet address
I've loads of sending and receiving addresses
when I sent coins from weaver after the swap I sent them to an address, but now it has a zero balance
I used console command listaddressgroupings and it gave me loads of them addys but none has the right amount from the wallet
any ideas?
you'll be laughing now but in the new Silk(SLK) wallet:
with all the swapping, transfers from weaver, Bittrex and split coins to stake....
I don't know what is my current Silk(SLK) wallet address
I've loads of sending and receiving addresses
when I sent coins from weaver after the swap I sent them to an address, but now it has a zero balance
I used console command listaddressgroupings and it gave me loads of them addys but none has the right amount from the wallet
any ideas?
Menu Bar > File > Receive addresses.
It shows a list of all addresses in the wallet
got 25k un stuck today. sent 5k silkcoin to weaver as a test to see if it lands.
once i get the rest unstuck ill send most to weaver but leave some staking to help the old chain.
once i get the rest unstuck ill send most to weaver but leave some staking to help the old chain.
Hello, I have a clean installation of silk-core (https://github.com/SilkNetwork/Silk-Core) in a new Ubuntu installation and working fine an its synced with the same block height as the explorer https://slkexplorer.silknetwork.org/
I am now stuck with the wallet, where can I find the basic commands? see the address of my wallet or create wallet, encrypt wallet. I know and I used: silk-cli help and silk-cli getwalletinfo but it doesn't say much. And then how to do coin splitting/coin control.
All of this with command line please. I have no gui installed. Tnx !!
I am now stuck with the wallet, where can I find the basic commands? see the address of my wallet or create wallet, encrypt wallet. I know and I used: silk-cli help and silk-cli getwalletinfo but it doesn't say much. And then how to do coin splitting/coin control.
All of this with command line please. I have no gui installed. Tnx !!
Weavesilk just for fun
Guys
you'll be laughing now but in the new Silk(SLK) wallet:
with all the swapping, transfers from weaver, Bittrex and split coins to stake....
I don't know what is my current Silk(SLK) wallet address
I've loads of sending and receiving addresses
when I sent coins from weaver after the swap I sent them to an address, but now it has a zero balance
I used console command listaddressgroupings and it gave me loads of them addys but none has the right amount from the wallet
any ideas?
you'll be laughing now but in the new Silk(SLK) wallet:
with all the swapping, transfers from weaver, Bittrex and split coins to stake....
I don't know what is my current Silk(SLK) wallet address
I've loads of sending and receiving addresses
when I sent coins from weaver after the swap I sent them to an address, but now it has a zero balance
I used console command listaddressgroupings and it gave me loads of them addys but none has the right amount from the wallet
any ideas?
The problem still stands though
I can't contact the owners of those addresses to make them join the movement here
I can't contact the owners of those addresses to make them join the movement here
I think you are right on that unless someone has the key for broadcast messages but I don't know if the dev team got it from the original dev(s). All we can do is try to keep the old chain moving as long as we can. This is a lot more effort than some of the coins I've had and lost because of missed swaps.
starting to look good!
Actually the new coins are and will be better than expectedwe are just messing around with old stuff and memories for the time being
About the old Silkcoin
The problem still stands though
I can't contact the owners of those addresses to make them join the movement here
The problem still stands though
I can't contact the owners of those addresses to make them join the movement here
Can someone please send me a test message just to see how this works in the old Silkcoin wallet
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Just sent a message ... public key was calculated as soon as I pasted your address.
Let me know if you get it in your wallet
Thanks
the problem is the public key
If two persons have prior transfers and the addresses are in the wallet database then the public key is available and you can send a message
Received at 04:31:43
starting to look good!
Can someone please send me a test message just to see how this works in the old Silkcoin wallet
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Just sent a message ... public key was calculated as soon as I pasted your address.
Let me know if you get it in your wallet
Sent 33 silkcoin to that address just now..
Status: 0/unconfirmed, broadcast through 3 nodes
Date: 10/28/16 23:34
To: ttoroie BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Debit: -33.00 SILK
Transaction fee: -0.0001 SILK
Net amount: -33.0001 SILK
Transaction ID: 483c42f2145a216f766bddb71b4985f4c6cf357f04a7e2674552fe753d7f6199
Can someone please send me a test message just to see how this works in the old Silkcoin wallet
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Silkcoin addresss: BL3N6pvch3VUX3xb5QjzCEJHqtMF1ESURv
Public Key: nnCgJFfUkYAFRq5K3XnppEWEsM4PrRwYCRS2uVudanT8
just write me a Halloween wish
Just sent a message ... public key was calculated as soon as I pasted your address.
Let me know if you get it in your wallet
Nice, let's see how long it takes to confirm, haha.
I hope you're synced already
ttoroie, that issue with messaging was solved way back in the old thread (back in the Hans days) but I cannot for the life of me remember the solution. I think you needed to have the address saved in your address book or something.
Good tipI'll look into that
Thanks
Anyway if someone knows for sure
how to send messages to another address
don't be shy
Just put another wallet on my guest PC. No Silkcoins on it though: BCa7822FUFc866qGdk8K6BceaKEhMf7LNM
Done
Code:
Status: 0/unconfirmed, broadcast through 3 nodes
Date: 29/10/2016 02:46
To: Crypt0Keeper new BCa7822FUFc866qGdk8K6BceaKEhMf7LNM
Debit: -101.00 SILK
Transaction fee: -0.0001 SILK
Net amount: -101.0001 SILK
Transaction ID: 984c0a24596a3479af0144f35ee37db214e8f9eb3da07423b86982fa6bfb1cad
Date: 29/10/2016 02:46
To: Crypt0Keeper new BCa7822FUFc866qGdk8K6BceaKEhMf7LNM
Debit: -101.00 SILK
Transaction fee: -0.0001 SILK
Net amount: -101.0001 SILK
Transaction ID: 984c0a24596a3479af0144f35ee37db214e8f9eb3da07423b86982fa6bfb1cad
Nice, let's see how long it takes to confirm, haha.
Just put another wallet on my guest PC. No Silkcoins on it though: BCa7822FUFc866qGdk8K6BceaKEhMf7LNM
ttoroie, that issue with messaging was solved way back in the old thread (back in the Hans days) but I cannot for the life of me remember the solution. I think you needed to have the address saved in your address book or something.
ttoroie, that issue with messaging was solved way back in the old thread (back in the Hans days) but I cannot for the life of me remember the solution. I think you needed to have the address saved in your address book or something.
Just thought of it.... try sending a test message through the old wallet to the address you sent me the coins to. I'll watch for it
How do I do that>I get
"result" : "Send failed.",
"error" : "Could not get public key for addressTo."
Jump to: