Topic: Road to RX 570/580 7 GPU MINING RIG (Read 83760 times)
If you dual mine, I would go with an EVGA 1200 W G2/P2. That will give you ~25% overhead from the rated power.
Hello,
What's the best PSU to run 6 RX 570?
What's the best PSU to run 6 RX 570?
Anyone have some experience with ASRock B250M Pro 4?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
Tried different cards on each riser. Everything works well with 3 cards. When i get the 4th one of them gets the power drawing variable and after a while the system crashes.
edit:
Solved. PSU 750W working with 5 cards, win10, 3pcie slots plus 2 m.2 adapters.
I have the same board. going to be running ubuntu, with the riser setup - 2 m.2 to pcie adapters, and then 5 risers (3 to the regular pcie and 2 to the m.2 adapters)
ill be using 1060's
is it just set 4g decoding to ON and then the upper memory lower (tulad? w.e that is) to 1gb?
Good afternoon, can you help me?
I have the following material
asrock h110 pro btc +
sapphire rx 570 nitro + 4gb
Corsair Memory 4Gb
psu 1200
Hdd - 500Gb
I only have one graph attached.
Sometimes it crashes ... I can not understand why ...
It's all fun, but the graphics give you nothing.
https://imgur.com/a/hRB9r
I have the following material
asrock h110 pro btc +
sapphire rx 570 nitro + 4gb
Corsair Memory 4Gb
psu 1200
Hdd - 500Gb
I only have one graph attached.
Sometimes it crashes ... I can not understand why ...
It's all fun, but the graphics give you nothing.
https://imgur.com/a/hRB9r
Hey guys,
I read a lot about a problem with more than 4 cards and that you must combine drivers. But i expect you can start Windows, which doesnt recognise more than 4 cards.
I have a little different problem. With more than 4 cards my Win10 even wont start. I see only black screen. I can reach BIOS, thats all. With up to 4 cards everything is working perfectly.
I have motherboard Asus Prime h270-plus and Sapphire rx 580 8GB cards, PSU 1200w.
Do someone experinece same problem? I am desperate after 3 days of trying to solve this. Thanks for any help. If someone provides me a solution, my first payment will go on his adress.
I read a lot about a problem with more than 4 cards and that you must combine drivers. But i expect you can start Windows, which doesnt recognise more than 4 cards.
I have a little different problem. With more than 4 cards my Win10 even wont start. I see only black screen. I can reach BIOS, thats all. With up to 4 cards everything is working perfectly.
I have motherboard Asus Prime h270-plus and Sapphire rx 580 8GB cards, PSU 1200w.
Do someone experinece same problem? I am desperate after 3 days of trying to solve this. Thanks for any help. If someone provides me a solution, my first payment will go on his adress.
If you are getting Black screen on the 5th card you need to enable 4G addressing options in the motherboard Bios. Plug the 5th card enter the bios settings and find the option for enabling PCI bus to see more than 4 cards. Read the thread above to find details of the option for that specific motherboard. That is all you need then install the 5th card
Good Luck and Happy Mining
Hey guys,
I read a lot about a problem with more than 4 cards and that you must combine drivers. But i expect you can start Windows, which doesnt recognise more than 4 cards.
I have a little different problem. With more than 4 cards my Win10 even wont start. I see only black screen. I can reach BIOS, thats all. With up to 4 cards everything is working perfectly.
I have motherboard Asus Prime h270-plus and Sapphire rx 580 8GB cards, PSU 1200w.
Do someone experinece same problem? I am desperate after 3 days of trying to solve this. Thanks for any help. If someone provides me a solution, my first payment will go on his adress.
I read a lot about a problem with more than 4 cards and that you must combine drivers. But i expect you can start Windows, which doesnt recognise more than 4 cards.
I have a little different problem. With more than 4 cards my Win10 even wont start. I see only black screen. I can reach BIOS, thats all. With up to 4 cards everything is working perfectly.
I have motherboard Asus Prime h270-plus and Sapphire rx 580 8GB cards, PSU 1200w.
Do someone experinece same problem? I am desperate after 3 days of trying to solve this. Thanks for any help. If someone provides me a solution, my first payment will go on his adress.
My 6 card rig is crashing when creating the DAG, 5 cards working fine.
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
same problem here
Increase virtual memory to 17500. As soon as I did this it was all ok.
thx bro...but after few minutes...got hangs again
Also having the same problem on one of my machines (mixed R9s). Anyone with solution?
My 6 card rig is crashing when creating the DAG, 5 cards working fine.
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
same problem here
Increase virtual memory to 17500. As soon as I did this it was all ok.
thx bro...but after few minutes...got hangs again
My 6 card rig is crashing when creating the DAG, 5 cards working fine.
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
same problem here
Increase virtual memory to 17500. As soon as I did this it was all ok.
My 6 card rig is crashing when creating the DAG, 5 cards working fine.
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
same problem here
My 6 card rig is crashing when creating the DAG, 5 cards working fine.
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
3 x AORUS RX570
3 x MSI ARMOR RX570
Win 10 64 bit
Tried various drivers with the same result.
Windows see's all GPU's but as soon as claymore starts creating dag it hangs. Any suggestions?
Anyone have some experience with ASRock B250M Pro 4?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
Tried different cards on each riser. Everything works well with 3 cards. When i get the 4th one of them gets the power drawing variable and after a while the system crashes.
edit:
Solved. PSU 750W working with 5 cards, win10, 3pcie slots plus 2 m.2 adapters.
Ok fellas, first of all huge thanks to all for the dedication and effort to get this working!
My Z170A Gaming Pro Carbon now perfectly recognises 7x RX 570 GPUs.
However..
Claymore doesn't.
It sees them alright, but errors out. "openCL error -4 (0) - Cannot create DAG on gpu.
It keeps restarting.
Any ideas appreciated!
My Z170A Gaming Pro Carbon now perfectly recognises 7x RX 570 GPUs.
However..
Claymore doesn't.
It sees them alright, but errors out. "openCL error -4 (0) - Cannot create DAG on gpu.
It keeps restarting.
Any ideas appreciated!
run linux, it handles these things better.
Amazing. 7 GPUs mining on 1 MSI Z170A Gaming Pro Carbon mobo CONFIRMED!
This community is worth gold... I mean... Bitcoin. Worth more than gold.
Dragonmike can you give us an update on your rig?.
Or anyone reading... with this MoBo MSI Z170A Gaming Pro Carbon I can get 6xMSI RX580 with no problem getting 29,5MH/s ETH on each. BUT 7xGPU is now unstable clock/volt settings. How about MoBo BIOS and GPU BIOS? I have both modded. Driver 17.4.4 patched with older AMD driver 16.9.2 folder. Same as most people with this MoBO and the RX5xxs in order to get them detected.
I don´t have precise power measuring but my PSU is EVGA 1300W which is sufficient for the rig. I have Windows 10 Pro.
I believe if 6xGPUs are detected, installed, patched and mining there should be no reason to freeze with the 7th but that is where I am. If anyone has some clue I really appreciate it.
Thanks a lot
JoeZener
Anyone have some experience with ASRock B250M Pro 4?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
I'm having problems getting the 4th and 5th card getting detected. Also, when i link the first m.2-pcie riser i lose one of the pcie cards. Seems like a bios config problem but i can't find the reason.
edit:
got the 4th card working with a m.2 to pcie adapter plus riser.
everything gen1, audio disabled and only 1 dumb plug on the card which doesn't have riser.
going to try the 5th on the other m.2 slot.
edit2:
for no reason everything got unstable after 12 hours with 4 cards. One of the GPUs (the one linked to the m.2 slot) is very unstable and hangs the process. I'm using a Corsair 750W PSU, 280W on the plug, 4xRX460 4Gb. VM 16384MB. Bios updated, win 10 pro.
edit3:
just notice that one of my cards is drawing power on a bigger gap than the others. GPU0,1,3 drawing 55W each. GPU2 drawing from 40W to 70W. (doesn't show on HWMonitor, only on GPUZ.
Any tips?
I found where are the issues, 3 riser cards dont work properly..., my bad that i do not checked all material one par one at the beginning.
Have a good day!
Have a good day!
Hi,
Is it possible to run 6 GPU MSI RX580 Gaming 8 Go on the motherboard Asus Prime Z270-P?
Up to know i only get 3 GPU with success, as soon as i try 4 or 5 or 6 GPU, the result i see only 1 or 2 GPU, no more, it's sound like my config meet limitation hardware somewhere.
I see on this motherboard it is Chipset Intel Z270 Kaby Lake and the controllers of PCIE are also Intel Kaby Lake, and my cpu is Skylake-S, may be there is an compatibility issue?
My config:
Asus Prime Z270P (Last Bios 0808)
CPU G3900 Skylake-S
Memory DDR4 PC4 19200 G-SKILL 2 x 4 Go
6 GPU MSI RX580
6 Risers
Supply x2 750W (Synchronised)
Windows 10 64 Bits (version 1703)
Driver 17.6.2
In Bios 4G Decoding Enabled, PCIE Gen1.
I read this topic, and i try all suggestions i have seen, but, nothing to do, always get only 3 GPU, no more detected.
I believe i will give up, and i will order new motherboard Z270A or new CPU Kaby Lake, because i am too bad at this moment..., i need help for sure.
Is it possible to run 6 GPU MSI RX580 Gaming 8 Go on the motherboard Asus Prime Z270-P?
Up to know i only get 3 GPU with success, as soon as i try 4 or 5 or 6 GPU, the result i see only 1 or 2 GPU, no more, it's sound like my config meet limitation hardware somewhere.
I see on this motherboard it is Chipset Intel Z270 Kaby Lake and the controllers of PCIE are also Intel Kaby Lake, and my cpu is Skylake-S, may be there is an compatibility issue?
My config:
Asus Prime Z270P (Last Bios 0808)
CPU G3900 Skylake-S
Memory DDR4 PC4 19200 G-SKILL 2 x 4 Go
6 GPU MSI RX580
6 Risers
Supply x2 750W (Synchronised)
Windows 10 64 Bits (version 1703)
Driver 17.6.2
In Bios 4G Decoding Enabled, PCIE Gen1.
I read this topic, and i try all suggestions i have seen, but, nothing to do, always get only 3 GPU, no more detected.
I believe i will give up, and i will order new motherboard Z270A or new CPU Kaby Lake, because i am too bad at this moment..., i need help for sure.
Does anyone know if AMD fixed the driver issue with >5 GPU's? Can you do 6 GPU without driver tweaking or do you still need to copy that file from an older driver?
Hi Jamievs,
I am finding my 3 rigs stable with 17.5.2 relive. No need to copy over with old versions. I actually tried with the latest (16.2) and it seemed to work fine. I think after 15.2 they've made it possible to run the latest drivers for multiple cards.
Download the 17.5.2 relive drivers from here: http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-17.5.2-Release-Notes.aspx , extract, and use device manager to install (as you probably already know). Make sure you use DDU to uninstall all the previous drivers first. And only do this with 1 card.
Does anyone know if AMD fixed the driver issue with >5 GPU's? Can you do 6 GPU without driver tweaking or do you still need to copy that file from an older driver?
Hi all.
Some answers:
Asus Prime z270p +2 m2-usb (for risers adapters) run 8x480 cards just fine.
And some question:
I was not unable to make to work 5x580 on Asrock f2a88 pro+ always got crashes in miner even all 5 recognized. But most time gor one missing. At same time with Prime all works fine. Anyone have same experience with Asrock? (480&470 works just fine with it)
And i can't get afterburner to work properly. It makes 4 cards at 300mhz and i cand change it if i use "unoficial" with power-play mode. (480&470 works perfect).
Some answers:
Asus Prime z270p +2 m2-usb (for risers adapters) run 8x480 cards just fine.
And some question:
I was not unable to make to work 5x580 on Asrock f2a88 pro+ always got crashes in miner even all 5 recognized. But most time gor one missing. At same time with Prime all works fine. Anyone have same experience with Asrock? (480&470 works just fine with it)
And i can't get afterburner to work properly. It makes 4 cards at 300mhz and i cand change it if i use "unoficial" with power-play mode. (480&470 works perfect).
Hi KGV,
Can you share with me your settings to get this working? I am only able to get 1 M.2 port working with a pcie adapter. Everything you know would be great if you could share, please.
Thank you
Rig pr0n
Hi man,
Great job that you've done there. Can you tell me how did you manage to squeeze 30 MH/s on the 570 card with that temperature? I can only mine ETH because while using the dual mining mode the card gets extremally hot. I can only get 20MH/s on dual mining and 25 MH/s on single mode.
Thanks in advance for your answer.
Jump to: