RX 560 4GB Ethereum - page 34. | Bitcointalksearch.org

mozuhin

newbie

Activity: 3

Merit: 0

good luck, man!

and I hope you really have an entire farm of rx560, because it's probably not worth it otherwise ://

as for me, I finally managed to get all the 6 GPUs to work together... 13,8 MH/s is the best I can get for now in a completely stabile system, using priviet bios (THANKS, priviet!!!) and 1100MHz GPU clock + 2040MHz memory clock set in MSI Afterburn
i managed to go over 14, but i'm gonna let it run like this for a while before i do some additional tweeking

best,

se32786

full member

Activity: 140

Merit: 100

Quote from: BradP560 on July 15, 2017, 11:56:41 AM

Hi guys, under request i made a video proof of the 16 Mh/s bios mod:

https://www.youtube.com/watch?v=FyH5cagVA-E

The price is: 0.85 ETH

contact me to: [email protected]

I was the one that requested this.

I purchased his rom everyone. I am waiting for him to send it... Once I get it (assuming he sends it), I will report here the validity of his rom.

Wish me luck Cheesy

BradP560

newbie

Activity: 11

Merit: 0

Hi guys, under request i made a video proof of the 16 Mh/s bios mod:

https://www.youtube.com/watch?v=FyH5cagVA-E

The price is: 0.85 ETH

contact me to: [email protected]

Branko

sr. member

Activity: 2562

Merit: 321

Everyone praises hynix memory over Micron, but while my Micron works at 2050MHz
with 1625MHz straps, best I managed with Hynix is 2000 with 1750 straps...of course,
if someone knows how to change every single memory timing instead just copy/paste them,
maybe that paints different picture

noreit

newbie

Activity: 30

Merit: 0

Hi all,
finally I got my 2x RX 560 Sapphire pulse OC. I tried get a little extra from them as default was about 11,5Mh/s. I tried both bioses from page4 and ended up with edited newsector bios. BIOS delivers like 13,4 Mh/s and I edited it from timings 1766 1050 core 2000 memory to 1625 timings 1050 core 2000 memory to get 13,7Mh/s. Not able to get more (I didnt changed voltage for memory though). Anyway, this setting have only 35-40W per card, which is honestly awesome.

I also tried priviet bios, but had only like 12,8MH/s which is quite strange.

I am thinking about dual mining, I know 2 cards are like nothing, I am just curious.

NoreiT

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: StraabdenDaals on July 13, 2017, 08:35:28 PM

Anybody got a benchmark on equihash?

yes i have one sapphire rx560 2G it does 134mh (not so bad some less than an half rx470)

someone here if i remember in begin of topic posted his speed with an 4G at less than 90 if i remember, i don't know why his one is so low

where the rx560 does good score it s on skein it does 134mh because of high clock it s actually very close to the r9 270 144mh stock (with 150w vs 75?/85?w)

IronFists

newbie

Activity: 57

Merit: 0

Quote from: votsirh on July 10, 2017, 06:21:15 AM

Quote from: IronFists on July 09, 2017, 09:22:14 PM

Micron. But the bios have Micron hynix support.

Tried on MSI RX 560 4g, but it doesn't work. The MSI is with Hynix.

Cheers

Thank you for trying the bios on a Hynix. Sorry it did not work.
It will work for Micron though.,

iam1000fold

newbie

Activity: 8

Merit: 0

Quote from: votsirh on July 13, 2017, 06:08:59 AM

Quote from: iam1000fold on July 13, 2017, 01:29:59 AM

hi guys!

anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s...

and also everything is disabled when i used afterburner... Embarrassed

please help me on this...thanks a lot

Change the AB version, worked for me. As for the bios, I tried Micron bios on Hynix and didn't end well.

thanks for the reply...i'm using AB v.4.3.0.9267...may i know what version are you using? thanks

Branko

sr. member

Activity: 2562

Merit: 321

Quote from: oldLEo on July 14, 2017, 01:21:34 PM

I record the normal flash I believe https://prnt.sc/fvqdo1
or
1. cmd as administrator ---> cd C:\atiflash_274
2. atiwinflash -unlockrom 1
3. atiwinflash -p -f 1 bios2200max-2100def-1750atallabove.rom (0 for first and 1 for second)

If what file name suggest is true (2100 default for mem) , then maybe you're actually lucky...
I have two micron based ones and with 1750 strap both top at 2050MHz

oldLEo

newbie

Activity: 3

Merit: 0

Quote from: votsirh on July 14, 2017, 08:08:37 AM

Quote from: oldLEo on July 14, 2017, 03:42:02 AM

Quote from: Branko on July 14, 2017, 02:53:18 AM

Quote from: oldLEo on July 13, 2017, 06:11:16 PM

Hi everyone I bought 3 Sapphire RX560 Pulse OC boards,
I only managed in one of them to work 100% to bios @Priviet Roll Eyes

the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. Angry

RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen.

I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Huh

Are you sure all 3 use same memory?

According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Grin

Status https://prnt.sc/fvj833 The three are Micron type.

Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks Undecided

the screen turns black sometimes it stays of another colors. Sad

The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz. Cry

How do you flash the bios ? provide the used command

I record the normal flash I believe https://prnt.sc/fvqdo1
or
1. cmd as administrator ---> cd C:\atiflash_274
2. atiwinflash -unlockrom 1
3. atiwinflash -p -f 1 bios2200max-2100def-1750atallabove.rom (0 for first and 1 for second)

priviet

newbie

Activity: 26

Merit: 0

Quote from: mozuhin on July 13, 2017, 06:55:40 PM

Quote from: priviet on July 13, 2017, 12:04:08 PM

reinstall pixel patcher after inserting second card, original driver seems to reinstall after card modification

nothing, so frustrating ://

"Radeon Settings are currently not available. Please try again after connecting a display to AMD graphics and extending the display. "

try to connect a display to the cards, at least one display or dummy hdmi plug.

votsirh

newbie

Activity: 36

Merit: 0

Quote from: oldLEo on July 14, 2017, 03:42:02 AM

Quote from: Branko on July 14, 2017, 02:53:18 AM

Quote from: oldLEo on July 13, 2017, 06:11:16 PM

Hi everyone I bought 3 Sapphire RX560 Pulse OC boards,
I only managed in one of them to work 100% to bios @Priviet Roll Eyes

the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. Angry

RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen.

I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Huh

Are you sure all 3 use same memory?

According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Grin

Status https://prnt.sc/fvj833 The three are Micron type.

Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks Undecided

the screen turns black sometimes it stays of another colors. Sad

The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz. Cry

How do you flash the bios ? provide the used command

oldLEo

newbie

Activity: 3

Merit: 0

Quote from: Branko on July 14, 2017, 02:53:18 AM

Quote from: oldLEo on July 13, 2017, 06:11:16 PM

Hi everyone I bought 3 Sapphire RX560 Pulse OC boards,
I only managed in one of them to work 100% to bios @Priviet Roll Eyes

the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. Angry

RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen.

I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Huh

Are you sure all 3 use same memory?

According to GPU-Z Memory Type (Micron) of the 3 only 1 of them I can use memory clock in 2140MHz Grin

Status https://prnt.sc/fvj833 The three are Micron type.

Strange that in the other 2 if I put of 1750MHz for 2000 or until 1850MHz in 10 minutes it locks Undecided

the screen turns black sometimes it stays of another colors. Sad

The 3 pieces came together sealed and new, strange the other 2 just pick up with the original Bios or by being at 1750MHz. Cry

Branko

sr. member

Activity: 2562

Merit: 321

Quote from: oldLEo on July 13, 2017, 06:11:16 PM

Hi everyone I bought 3 Sapphire RX560 Pulse OC boards,
I only managed in one of them to work 100% to bios @Priviet Roll Eyes

the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. Angry

RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen.

I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Huh

Are you sure all 3 use same memory?

StraabdenDaals

newbie

Activity: 49

Merit: 0

Anybody got a benchmark on equihash?

mozuhin

newbie

Activity: 3

Merit: 0

Quote from: priviet on July 13, 2017, 12:04:08 PM

reinstall pixel patcher after inserting second card, original driver seems to reinstall after card modification

nothing, so frustrating ://

"Radeon Settings are currently not available. Please try again after connecting a display to AMD graphics and extending the display. "

oldLEo

newbie

Activity: 3

Merit: 0

Hi everyone I bought 3 Sapphire RX560 Pulse OC boards,
I only managed in one of them to work 100% to bios @Priviet Roll Eyes

the other 2 Sapphire RX560 Pulse OC none of the available bios @newsector and @Priviet give color screen after a few minutes. Angry

RX560 Pulse OC 6 pin standard is almost 12mh/s I do not understand, the boards are the identical why only in one of them took round for days to almost 15mh/s @Priviet and the others give the color screen.

I was looking to buy other RX560 Pulse OC 6 pin but now I do not know what I do. Huh

votsirh

newbie

Activity: 36

Merit: 0

Quote from: Danesz10 on July 13, 2017, 06:37:53 AM

Quote from: Danesz10 on July 12, 2017, 09:16:28 AM

Quote from: votsirh on July 12, 2017, 08:17:47 AM

Quote from: Danesz10 on July 12, 2017, 08:09:27 AM

Quote from: votsirh on July 12, 2017, 07:57:50 AM

Quote from: Danesz10 on July 12, 2017, 07:39:24 AM

Hi!

I don't want to buy bios mods and etc. I understand if somebody wants to sell the knowledge he/she got but now I would like to exchange the informations between us to see who got good result with different setting etc. in afterburner, or BIOS mod. That's all.

I cannot reach 12Mh/s I tried different Afterburner settings but the results are the same. Maybe a bit better, but the card termperature and etc are going up and the cards are not stable.

Is there somebody who has got a good afterburner settings which is "free"

Or just BIOS modding can help to me?

What are the cards ?

Sapphire RX560 Pulse 6pcs

Go to page 4 or 5, there are 2 modded bioses for these cards. The first one is making 14,5 (not stable for me) and 1-2 posts below there is 13,5 mh/s which is stable and are here for free

Thank I tried it now. And It's worked

I will check what happen after a day

Thanks!

Now with the new BIOS the rig is working well. 14.3 - 14.5 Mh/s / card - 60-65°C - FAN: 80-90%
24H test completed!

Thanks the good advise again

Glad to hear that. So you're using priviet's mode ? may I know what PSU you're using ?

Thanks

priviet

newbie

Activity: 26

Merit: 0

reinstall pixel patcher after inserting second card, original driver seems to reinstall after card modification

mozuhin

newbie

Activity: 3

Merit: 0

Hi guys,

I have a problem with rx 560 cards, I made a standard rig (asrock h81.pro BTC, win10) and configured/flashed each card individually (cards are Sapphire Pulse Micron version and with BIOS mod I can get them to go 13,3 Mh/s, not great but I'll continue playing with them).
BUT, as soon as I connect more then one card, my system doesn't recognize them any more. This is a totally new error for me and I have no idea what to do. Cards are there in Device Manager but with an exclamation mark on them (“Windows has stopped this device because it has reported problems /Code 43/”), Claymore just gives the message "no amd opencl or nvidia cuda gpus found, exit" and I can not enter the AMD panel for the same reason. I installed the latest drivers + pixel patcher, every card works when it is the only one connected but I can't get them to work together. What am I missing, does anyone have an idea? Please, please help...

Best,

Topic: RX 560 4GB Ethereum - page 34. (Read 212704 times)