Pages:
Author

Topic: Signatum (skunk) ccminer-krnlx 30+mh 1070, 52.5+ mh 1080ti [FREE,OPENSOURCE] - page 10. (Read 39469 times)

newbie
Activity: 12
Merit: 0
Works great  Wink

44mhs @ 1080 ti

Afterburner settings:
- Core Voltage: 0
- Power Limit: 75%
- Temp. Limit: 75 c
- Core clock: +100MHz
- Memory Clock: +600MHz.

Any suggestions to get even better result?
legendary
Activity: 1510
Merit: 1003
cuda 7.5 x64 compile from krnlx github
equihash excluded as it caused build errors
I like x64 builds - they have temp monitoring
both maxwell and pascal work
https://drive.google.com/open?id=0B4flkNGCHIGFbnF5TktUTEtsRW8

52mhs 1080ti @80%tdp
newbie
Activity: 155
Merit: 0
who want to download, compiled from the latest git:

ccminer_krnlx170810.7z

3 exe

x86 cuda 8.0 & 7.5
x64 cuda 8.0

x64 cuda 7.5 doesn't compile, errors

all are upx --lzma compressed


thanks to all developers making this available.


Thanks dude, this version is pretty good, around 55Mh/s on gtx 1080Ti +135 on core
member
Activity: 118
Merit: 10
Possibly in nicehash? How?
newbie
Activity: 12
Merit: 0
who want to download, compiled from the latest git:

ccminer_krnlx170810.7z

3 exe

x86 cuda 8.0 & 7.5
x64 cuda 8.0

x64 cuda 7.5 doesn't compile, errors

all are upx --lzma compressed


thanks to all developers making this available.


Thanx for compiled version. Could you help me how can setup this to my pool? Where/how can I put my .bat file?
member
Activity: 134
Merit: 10
who want to download, compiled from the latest git:

ccminer_krnlx170810.7z

3 exe

x86 cuda 8.0 & 7.5
x64 cuda 8.0

x64 cuda 7.5 doesn't compile, errors

all are upx --lzma compressed


thanks to all developers making this available.
sr. member
Activity: 476
Merit: 250
If Windows version is still not available I can ask my team of developers to compile one. However, they will require some donations. If anyone with large gpus interested in, feel free to pm me.
newbie
Activity: 5
Merit: 0
is there version for windows?
not sure how it works. tried few way, it seem unable to launch it.
full member
Activity: 243
Merit: 105
1070 cards got speedup to.

I am getting best results with -i 26 on ti and -i 25 on 1070 with last updates, stock cards.
full member
Activity: 243
Merit: 105
Code updated. Up to 52.5 mh on stock 1080ti
newbie
Activity: 16
Merit: 0
Don't waste your time mining signatum, it's done.
member
Activity: 102
Merit: 11
Even if we don't know personally...... still i am 100% sure that file provided by Epsilon is CLEAN, and we can use blindly.
newbie
Activity: 49
Merit: 0
I got a decent bump from about 93 MH/s to about 99-100 MH/s when I first started using this. Now it's back down to 91-93. Any idea why it would drop? I haven't changed my settings and my gpu's aren't throttling. I'm confused.
newbie
Activity: 7
Merit: 0
I'm getting 25 Mh now instead of 18 w/ a 980Ti. Thanks!
newbie
Activity: 15
Merit: 0
SO... is there a new clean version of the file anywhere for windows, 32bit / 7.5 Cuda, as this seems to work the best? surely there must be someone in here who can provide a clean file with some decent ethics.

Cheers,
legendary
Activity: 1078
Merit: 1011
Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufileio/haxxr

nofileio/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG
And here is the 64 bit release.
nofileio/f/s49HoBZTqW0/ccminer.exe

Fu*k,

I seen ppl reporting this one having a Trojan and i downloaded and tried this version on 3 of my rigs.

Any idea how to clean my pc properly now in case it was infected? :/

Dynamite it !!


Nahh im srs. I mean, ok, i deleted the files, but what if trojan horse got somewhere after i ran the app?

Should avira be enough?

Only surefire way is to wipe the machine completely and reinstall everything from the OS on up. Be sure to do a full reformat of the SDD/HDD as well before reinstalling.

The file may also have contained a worm that spread to other systems on your network, so you may want to check any other computers you may own over thoroughly as well.

As was suggested earlier, if you have wallets on any of those systems you may want to consider transferring the balances to a secure wallet first and just hope the Trojan is not lying in wait for you to unlock your wallet before front running you. Wipe those systems as well afterwards and reinstall everything fresh.

Are these steps a lot of work? Yes, but what do you expect when you download a .exe from some random guy on the Internet and then run it?


True, altough BitPorium is a Hero Member and seemed legit after short investigation. If he just compiled, dunno how trojan/virus appeared?

I'll do that.

Yeah, I did not necessarily mean to disparage BitPorium in my post, but the point is we are all essentially strangers to one another. Even going by rank or trust is still trusting an unknown person as accounts can be sold so you cannot even know for certain if the person is the same one who started the account.

Also, if you read through the later comments, even BitPorium himself was uncertain and recommended to not use that version any longer.

Myself, I think it may have indeed been a false positive as many antivirus vendors adopt a better safe than sorry attitude when it comes to mining software and will aggressively flag any miner as probably 95%+ of their customers do not run miners.

But anyway, the poster I was replying to indicated he was fearful of a Trojan and asked how he could be sure he completely removed it. My response was to address that concern specifically and the only way to be sure is to do a complete wipe and reinstall from known clean source material.
legendary
Activity: 1108
Merit: 1005
Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufileio/haxxr

nofileio/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG
And here is the 64 bit release.
nofileio/f/s49HoBZTqW0/ccminer.exe

Fu*k,

I seen ppl reporting this one having a Trojan and i downloaded and tried this version on 3 of my rigs.

Any idea how to clean my pc properly now in case it was infected? :/

Dynamite it !!


Nahh im srs. I mean, ok, i deleted the files, but what if trojan horse got somewhere after i ran the app?

Should avira be enough?

The best thing you can do is, format whole drive, and install fresh copy of your os.
member
Activity: 91
Merit: 10
I built the project from source on windows but I got allocation errors.

The compiled binary is here : sendspace com/file/yxp59j

It is preferable to build it yourself to avoid any embedded viruses...

How to build.
Please give a step by step guide.
thanks

You need:
- Visual Studio 2013 (Free edition)
- CUDA ToolKit 8
- GIT

And do the following :
git clone https://github.com/krnlx/ccminer-skunk-krnlx
git clone https://github.com/peters/curl-for-windows.git compat/curl-for-windows

Copy the second project inside the first project (you will see a folder called "compat")

Then open the ccminer.sln project using Visual Studio, and then BUILD/Compile

Where did you download VS2013 from? I tried but download was not available on Microsoft.

I took it a long time ago on the microsoft website.
It seems to be available on this link but you need to create an account : https://www.visualstudio.com/vs/older-downloads/

Nope, its gone from that site.
Register for Dev Essentials and the search will pop..
https://www.visualstudio.com/dev-essentials/

Thanks, downloading now.
newbie
Activity: 14
Merit: 0
I built the project from source on windows but I got allocation errors.

The compiled binary is here : sendspace com/file/yxp59j

It is preferable to build it yourself to avoid any embedded viruses...

How to build.
Please give a step by step guide.
thanks

You need:
- Visual Studio 2013 (Free edition)
- CUDA ToolKit 8
- GIT

And do the following :
git clone https://github.com/krnlx/ccminer-skunk-krnlx
git clone https://github.com/peters/curl-for-windows.git compat/curl-for-windows

Copy the second project inside the first project (you will see a folder called "compat")

Then open the ccminer.sln project using Visual Studio, and then BUILD/Compile

Where did you download VS2013 from? I tried but download was not available on Microsoft.

I took it a long time ago on the microsoft website.
It seems to be available on this link but you need to create an account : https://www.visualstudio.com/vs/older-downloads/

Nope, its gone from that site.
Register for Dev Essentials and the search will pop..
https://www.visualstudio.com/dev-essentials/
newbie
Activity: 48
Merit: 0
Anyone try out with 1060 yet? is this good, and how is the hashrate?
Pages:
Jump to: