Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 19. (Read 237261 times)

Furycoin,here is this coin,on algorithm SuperFast

Paging doktor83, please help  
I struggle with 1.8.8 on my vega56 rig.
https://i.ibb.co/zWdbLwt/Screen-Shot-2019-05-26-at-1-43-10-PM.png

I have a decent hr on cn pico (turtle) but cnR i have horrible and unstable.
Should i raise core clock? Mem clock is pretty much at max (hynix memory) and it can't get over 910.
What are optimal settings for vega56 on cnr?

Can you please add --extendedlog to start.bat, and if this happens again send me the whole log file.

Version 1.8.9 eventually crashes for me and ends up spitting only this :

[2019-05-26 10:25:49] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:26:33] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0ba9ffa8e70537e99fa7db36c5a4dde2f1ad1294fc7d53e17e50f1130701247f4ca8b9d5485c0 0000000799dc1c161b7d129985fd562330eefce621530ea39965683170a3fb3d6ca822503","job_id":"207536794639743","target":"8b4f0100","height":1842901}}
[2019-05-26 10:26:34] json_send[202]: {"id":139,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"011f6900","result":"5209d27598e2285070b5aee1b0916b1b27bc7c62e6d4789cc6ea379d93870000"}}
[2019-05-26 10:26:34] json_receive[73]: {"id":139,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:26:34] miner_result: Too many invalid job errors, connecting to next pool
[2019-05-26 10:27:05] json_send[202]: {"id":140,"jsonrpc": "2.0","method":"submit","params":{"id":"536912071801769","job_id":"959042067134134","nonce":"dd516900","result":"a64fbb05010809a06e1a0118e1ef2b4d76f0cc9b84de6ac7c3b00acddf230100"}}
[2019-05-26 10:27:05] json_receive[73]: {"id":140,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-05-26 10:27:05] miner_result: GPU0[BUS:1] result rejected for job[2] [invalid job id]
[2019-05-26 10:28:01] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8180a9e7051daf5d91e61e074a63cc188ad34c8fb189808534be9ebf12df1eae1a6808b70a0 000000028740b2df6004a6e509c6d581f1ce5ac18dcc37e572128cb7320e20ae40dc79d17","job_id":"339747801201164","target":"8b4f0100","height":1842902}}
[2019-05-26 10:28:11] json_receive[269]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0b8b80a9e705799ce479fc0c098816a99ebec48a2acdd9de1a0e28e802ae04492f11de4e80760 00000007c98b47f59706fe070a0d7c21e09a47b9c25efde346b48f3ab3cb40c373469e702","job_id":"635405887252134","target":"8b4f0100","height":1842903}}

what coin? its english topic

кaкaя мoнeтa. пиши пo-aнглийcки, тoпикcтapтep pyccкий нe знaeт

Пoдcкaжитe ктo нe бyдь,чтo зa aлгopитм cryptonight-superfast? ecть ли oн в SRBminere?

Great work,doktor!  
A good increase of 3-5% which is fine.
Thanks for your dedications!

Looks like with old mode and preparedata I am back at same GPU and CPU hashrate as before, so no loss CPU % and hashrate
Will play a bit with tweak as you mentioned

thx

Will try this out tomorrow --

Currently running 1.8.3 mining bittube

[2019-05-24 23:54:55] GPU0 :    962 H/s [T: 68c, RPM: 1106, CC: 1250 MHz, MC: 2000 MHz][BUS:11]
[2019-05-24 23:54:55] GPU1 :    962 H/s [T: 63c, RPM: 956, CC: 1250 MHz, MC: 2000 MHz][BUS:12]
[2019-05-24 23:54:55] GPU2 :    1204 H/s [T: 74c, RPM: 1172, CC: 1250 MHz, MC: 2000 MHz][BUS:13]
[2019-05-24 23:54:55] Total:    3128 H/s

Hoping to get more juice out of it!  Keep you posted!

I fixed this issue and re-uploaded 189, so you can download it again and use old_mode + preparedata together.


Algos with small scratchpad size like upx2, turtle have the least benefit from tweaking profiles on RX, if you look at it in %.
Others should be there about 3-5%, depending how good is the strap in the modded vbios.
I don't understand why are you still on stock vbios

Work fine 1.8.9. Checked with profiles settings, got a speed increase of ~5.5% on standard VBIOS. A little, but nice.

I removed the --preparedata and is working.
But I do not see any significant gain other than getting the same hashrate as with old_mode: true on 1.8.8, without it 1.8.8 was slower for me.

Also CPU utilization went up and since I am mining with CPU lost 600 h/s

- 1.8.8: hash 175K with old_mode true
- 1.8.9: hash 175k without old_mode and tweaks 1-8 and no preparedata at command line

So the small gain 100/200 h/s is canceled by higher CPU usage which cost 600 h/s

my card RX580 8Gb bios modded are at CC 1200/940 MC 1950/900

Try adding --nobinaries to the cmd
Or just remove the --preparedata

edit:
yes i see what i have forgot, going to fix and re upload later
old_mode + preparedata dont cooperate

Just update to 1.8.9, Win 10, 7 RX 580 cards

getting an error:
Error CL_INVALID_WORK_GROUP_SIZE when calling clEnqueueNDRangeKernel for kernel 00 for DeviceID 4 (Thread 9)

any idea?

this is my config:

{
"cryptonight_type" : "upx2",
"double_threads" : true,
"gpu_conf" :
[
       {"id" : 0, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 1, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 2, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 3, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 4, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 5, "intensity" : 107, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true},
   {"id" : 6, "intensity" : 105, "worksize" : 8, "threads" : 2, "fragment": 0, "tweak_profile": 1, "old_mode" : true}
]
}

now I see, tnx
there is an increase of ~3%, but will make some fine tuning during the weekend
good 

You need to use tweaking profiles to have some increase

installed the V1.8.9, works but same as the last version, I have no increase on rx 570 8GB (mining XHV)

while downloading from https://www.srbminer.com it is still written v1.8.8 

V1.8.9
- Added tweaking profiles for RX 550/560, RX 470/480/570/580/590 - for some small fine tuning of existing vbios straps
- Profiles 1-6 for Vegas are now a little lighter, 7-10 stayed same
- Added embedded binaries for some gpu's
- Added parameter --nobinaries, use it to disable usage of embedded binaries
- Fixed some bugs in GPU detection code
- Added more info to log when using tweaking profiles
- Added watchdog for too many invalid job results, switches to next pool if more than 5 within the same connection
- Usage of external tweaking tool is now allowed, so you can now fine tune a profile even more if you know how
- Minor bug fixes


+ Added tweak profiles for RX 550/560, RX 470/480/570/580/590 cards, this is for already modded cards, but can be used also on stock vbioses.
In this case the performance will be much lower than with a modded vbios. This is more like just to get out a little bit more hash of your already highly tuned Rx gpu

+ Tweak profiles 1-6 for Vegas are now little lighter, because not every gpu can handle profile 10, right ?

+ Added embedded (built-in) binaries for Vegas & Ellesmere & Baffin gpus when using auto setup. If you have problems with using them, add --nobinaries to your start.bat

+ 'External tweaker protection' removed, because of multiple reasons, but let's stay positive and say this was done so you can fine tune even more

Hi,

I've solved the stability problems by installing the latest Adrenaline drivers.
Since then, the rigs have been running flawlessly on monero.

However, speed has also gone down, from 455 H/s on my ageing 280X to 430-445 H/s.
The speed decrease is not so much of an issue, it's better to have the rig mining than to have them crash all the time and not mine anything.
Though I would be much happier if they still worked at 450 H/s.

Thank you so much for the reply and the tips Dok ! I will try it first. looking forward for your brand new SRBMiner Ver. 1.8.9 i have MSI RX580 8GB ARMOR and Gaming X Rigs ready to deploy.