Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 20. (Read 237213 times)

This happens shortly after the message "Precompiling program" ?
If not, describe is the miner crashing, or what is happening.
Also upload log somewhere so i can take a look at it ?




For Haven you should try this for Vega56:


No need to change drivers, 18.5.1 is ok.
Also add --preparedata to your start.bat cmd line, it gives a little boost on Haven for Vegas

Good day!
Tell me please, what speed should the card have 480-8Mb on algo litev7?

can i please get the answer Dok? 112 Intensity with tweak profile 3 crashed my Vega56, sometimes even to BSOD. how much should i set my base intensity (for cn-haven algo) before setting the tweaking profile? also, is it mandatory to change the driver from 18.5.1 to 18.6.1 to see the increased performance on Hashrate? sorry for noob questions,  thanks

Hi team

I have 9 mine Rigs use rx 470
Sometime all of them has same issues below

[2019-05-23 10:35:52] json_receive[259]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0bb8aa98e70559de9e62ca77708cf1ad3cadf4cffa2898c9fb220e3f2f6bb54cc729d1b3be2e0 00000006f1c48800660941e0cd2da3101431efb1d04f0d1f57b68923f2f44294917be3202","job_id":"27518","target":"cf8b0000","height":1840555}}
[2019-05-23 10:36:47] watchdog: GPU0 [BUS: 3] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU1 [BUS: 5] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU2 [BUS: 6] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU3 [BUS: 7] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU4 [BUS: 1] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU5 [BUS: 4] hashing speed is 0 H/S
[2019-05-23 10:36:51] json_receive[259]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0bf2aa98e7058aa992fcacf54f6b6b27e548d4d674e1be98611f3cbf49de0b264e078d6bb9130 0000000acbfdbf080ca1ea35f6ea55ea52d8814648fab56e91d7b6f8e21d06adc20eb030f","job_id":"27519","target":"cf8b0000","height":1840556}}
[2019-05-23 10:41:37] Startup monitor attached


How about that
Here is my config pool
{
"pools" :
[
   {"pool_use_tls" : false,
"pool" : "xmr-asia1.nanopool.org:14444",
"wallet" : "41hgaCaFC......3NS6n6znSJoFEWN1pUcjG.a75df28f221a445a2174115d8f7a5a07c798071535 be256e1234567890abeef8.Mi9/[email protected]",
"password" : "x",
"location" : "europe"},
   
]
}

I am testing it already on a few rigs, so if everything goes OK, i will release it tomorrow.

This will be a great update. Recently I use only SRBminer. And with such new settings it will be even better. Approximately when can we expect the next version?

Hurry up Dok!! cannot wait to try it out !

nice, will test asap !
thx

Dont you worry about that message, it is just a notice.




I am done with 1.8.9, atm in the testing phase. It contains tweak profiles that can be used on rx 450/460/550/560 rx 470/480/570/580/580/590.
It is intended for already modified cards - to get out a little bit more juice, but of course it will work on stock bios too, but the performance is far from a modded vbios.

BTW:

I'm using these drivers:
https://www.amd.com/en/support/graphics/amd-radeon-r9-series/amd-radeon-r9-200-series/amd-radeon-r9-280x


but still get:
2019-05-22 13:01:02] NOT using the recommended drivers: Adrenalin 18.6.1 or Adrenalin 2019

Those are for Vega, not RX cards, sorry needed to specify that!

lol !!
https://bitcointalksearch.org/topic/m.50678947

GOT it! Will report back with the logs.

Hi,

any plans to add AMDTweakTool or Claymore type of stripe to increase AMD RX cards hashrate ?

thx

Thanks for the answer Dok! so, the settings of my OverdriveNtool and even changing my Adrenaline Driver from 18.5.1 to 18.6.1 won't affect anything much to the hashrate right?

can you please tell me the recommended Base Intensity, threads and worksize of "gpu_conf" for Vega56 - CN-Haven algorithm to start tweaking with?
Currently I'm still using basic cn-haven config with "intensity" : 0

thank you !

You can try to add --watchdogrounds 10 to start.bat , this will trigger the watchdog later. But i have a feeling that's not the problem.

Hi, maybe those cards can't handle that intensity. Have you tried to lower intensity only for those GPU's ?
Are they crashing ? A log would be helpful.




Not every card can handle the same intensity/tweak profile. So what you need to do is to test separately which tweak profile can you use on which gpu.
For that you need to use the 'gpu_conf' or set gpu's in cmd line.

Hello Doktor! I just recently switched to SBR Miner Ver. 1.8.8. Can you please kindly explain more to me about step 2 & 3? I Don't know ElioVP's tool, PPT and is ODT = OverdriveNTool?

I'm Haven miner, and i have three (Windows10 Pro) Rigs with 4x Asus RX Vega56 (Hynix Mem) each. I'm using 18.5.1 Driver, and here is my OverdriveNtool base settings i got trouble with:

GPU:
MHz/mV
P0 : 852 / 800
P1 : 991 / 900
P2 : 1138 / 950
P3 : 1269 / 1000
P4 : 1312 / 1050
P5 : 1474 / 1100
P6 : 1212 / 905
P7 : 1450 / 925

Memory:
MHz/mV
P0 : 167 / 800
P1 : 500 / 800
P2 : 700 / 900
P3 : 940 / 925

Nothing changed in config-haven.txt


with above settings, my base Hash rate is ~1700 H/s for each Vega56. i press "+" up to Tweaking Profile 2, then it is increased to ~1800 H/s for each Vega. but, starting from Tweaking Profile 3, it went to ~2000 H/s then drop to ~1200 H/s in about 10s and not recovering back. (stuck at 1200H/s each Vega)

I've tried Tweaking Profile to 4,5 and 10 and it gave me BSOD with "Video TDR Failure" Error Code.


Is It possible for all Vega56 to reach 2000H/s per Card with CN-Haven Algorithm? can you please help me / tell me what to do to reach that Hashrate?

I'm sorry if this question is too noob and if it's already answered before. I'm not very good at computer things. but i can follow guide well,hopefully.

Thank you very much for your awesome miner and your contribution to Crypto World!

i dont remember if i mentioned you or i asked you about my issues , btw , your comms are irrelevant  , so stop posting bullshits