Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 22. (Read 237261 times)

sry. Doctor knows very well why I do this


http://imgbox.com/vNHF2cqb
3 hour is better?

2*vega 56@64bios + 1Vega64LE CNR = 7100HR 650/680W from the wall.
http://imgbox.com/mPcBek9D
LE use more power for water cooled(20W+) and this rig have 1+ vega 56 in slot(?? 10/20w+) and 6 extra fun.
Rig have only 1000W bronze and not power for 4 vega with full power.suply give only 760W.

Hey livada, thanks for tweak info, do you (or anyone else) know if mem tweaks affect heat or only voltage affects heat?

@livada you are just being toxic 

post setings like DOCTOR?. he posted  tweeking setings for 10 step? he say posted but never posted setings here or AMD TWEAK topic. but he block AMD TWEAK.hmm.
i use pbfarmer seting and my vega block(etc i chg only RAS 28 t oRAS 32 and 1 gpu work)- every vega have diferent seting. but you know this if you try any setign with vega. AND this test not amd tweak test this test only give other solution with big HR and little power . before 30 day srbminer is very good miner- today srbimner nod good miner- TRM ias good miner today. Tomorow? mybe  JCE back and best who know....

You think this test is fake ( 3min only) ? post your here if you have better. Today i post test after 2-3 hour and what you say after this? hmm you not postet after 10 day. when i posted after 10 day you say not tested 30 day?

If you have 1 vega you know for TRM and if your vega not have identical HR like my test(+ - 2%) you not good setup your vega. Read my other post- before 1 yrs. i love srbminer but i hate DEV like DOCTOR. He stole -and use for all and give what? BLOCK AMD TWEAK.

see this test(2-3 min etc) srb mineron on this day have best HR. but this is past.
This is my post old 1 YEARS


For all other AMD MEM tWEAK setings you have topic for this but this is universal seting for start...

Lucky Vega 64 or flashed 64 (Samsung):
--CL 19 --RAS 28 --RCDRD 12 --RCDWR 5 --RC 44 --RP 12 --RRDS 3 --RRDL 3 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248

Weaker Vega 64 or flashed 64 (Samsung) - use if lucky timings aren't stable:
--CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248

Lucky Vega 56 (Hynix):
--RAS 22 --RCDRD 17 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 4 --RFC 148 --REF 15600

Weaker Vega 56 (Hynix):
--RAS 24 --RCDRD 19 --RCDWR 4 --RC 35 --RP 13 --RRDS 4 --RRDL 5 --RFC 148 --REF 15600



i just chg RFC and RAS for testing . any gpu must start solo and test. after test and see just go on next gpu.

2 minute tests with just 2 accepted shares are very accurate!

A good setup with perfectly tuned Vega's can do great on average and poolside, but not that great as you want to show here. Please don't try to confuse beginners here. I own enough Vega's and use both miners, both have their advantages and disadvantages. But you have a very big problem mate. If you really want to help, here or there, this doesn't matter, post your own real settings (not the copied ones from the Vega Mem Tweak thread) and don't hide behind the anonymity with your daily blabla.

just flash bios with vega 64bios
Tutorial1:https://www.youtube.com/watch?v=yM2qKc1qXiM
Tutorial2:https://www.youtube.com/watch?v=tQQX1H8Uj2w

Other test:


Vega56 UPX2= 81000HR (GPU1450mhz/866mv)(MEM 1100mhz/866mv)
Vega64 UPX2= 81800HR (GPU1480mhz/866mv)(MEM 1100mhz/866mv)
http://imgbox.com/f8vKD79q


Vega56 XCash= 1190HR (GPU1450mhz/866mv)(MEM 1100mhz/866mv)
Vega64 XCash= 1270HR (GPU1480mhz/866mv)(MEM 1100mhz/866mv)
http://imgbox.com/Kidvj6nK


Vega56 GRAFT= 3080HR (GPU1450mhz/866mv)(MEM 1100mhz/866mv)
Vega64 GRAFT= 3250HR (GPU1480mhz/866mv)(MEM 1100mhz/866mv)
http://imgbox.com/rWY5wPYv


Vega56 TRTL2= 21460HR (GPU1450mhz/866mv)(MEM 1100mhz/866mv)
Vega64 TRTL2= 21490HR (GPU1480mhz/866mv)(MEM 1100mhz/866mv)
http://imgbox.com/178uvcdg


Vega56 MSR2= 4500HR (GPU1450mhz/866mv)(MEM 1100mhz/866mv)
Vega64 MSR2= 4750HR (GPU1480mhz/866mv)(MEM 1100mhz/866mv)
http://imgbox.com/xd9cCGRg


Vega56 CNR= 2360HR (GPU1450mhz/870mv)(MEM 1100mhz/870mv)
Vega64 CNR= 2460HR (GPU1480mhz/870mv)(MEM 1100mhz/870mv)
http://imgbox.com/TzsvzlCa

Conclusion: TRM consumes less electrical energy and gives more 10%HR and not block any other program.

mem 1100mhz on Vega56?
how do you do that?

I use :

N2DCRYPT
GKumaran
rednoW
pbfarmer
Mashy81
Anwil

and testing. i modifiy card per card- v2ga64-veg56-vega56 hynix and chg RFC and RAS.
Every GPU have diferent AMD MEM TWEAK


You have PM. ANd go in profile and personal mesage and you have option for NEWBI PM.

Only you have mental problem. you must read first. and after read problem  give answer. Your answer is very stupid. We write more than one  WEE USE --disabletweaking but srbminer block AMD mem twek forever. I not use SRBMINER i use TRM and not work AMD after 1 time start srb miner and test srbminer tweak(muste reinstal windows)

NOW go read this mesage 10 time and STF if not understud problem.

Nice results. Are you using kerney66 recommended timings or some custom ones?

run miner with no admin right , or --disabletweaking that is secret

livada you have mental problem really, chill bro

livada, could you share how you managed to fix the eio.dll issue?
I'm unable to send you a private message, as my account has a newbie status.

Thanks

Contact me on PM. I solved this problem. Im not smart like DOCTOR but i solved this.

use TRM and ignore DEVs that block programs that help us all like AMD MEM TWEAK

vega56 CNR= 2360HR (GPU1450mhz/870mv)(MEM 1100mhz/870mv)
Vega64 CNR= 2460HR (GPU1480mhz/870mv)(MEM 1100mhz/870mv)
http://imgbox.com/TzsvzlCa

You not say go reinstal Windows...

You again not read problem. Wee disable tweeking but EIO.dll not work. This is problem. Iff you wont read and answer on question u must READ question.. I ako ne razumes sto pricamo. Procitaj pitanje pa odgovaraj jer se pravis grbav a miner ti blokira sve oko sebe. i to nema nikakve veze s ovim sto ti pricas. Disablirao sam  ttvoj tweeker ali samo reinstal windowsa odblokirava  amd tweak. Sto se bavis s necim ak ne razumijes procitat obicno pitanje? Stoti neznas sto si blokirao ? ili si tolko nesposoban ili se samo pravis da neznas jer si tolki smrd?

Ovom cu ja pomoc jer sam naso nacin kako da zajebem tvoj blok AMD mem tweekera.
Stvarno dugo takvu nezahvalnu supcinu kao sto si ti nisam vidio.

Next version will contain a little more info about tweaking in the log. Have you tested the cmd line launch without using awesome miner ?
I mean, just making a .bat and running directly SRB with the same parameters.



Using multiple displays + using the computer + mining all at the same time, can get you crashes.


I don't know what to tell you more, you read everything so you know that you should disable tweaking in SRB if using an external tweaker.



Still investigating

Hi, doktor83.

And yet another bug. On my second rig.
Miner work but on which pool?

Please, see log
https://pastebin.com/pUA5zmZM

I think this the same bug but with different effects.

Hello doktor,

I have the same problem with EIO.dll as livada on one of my rigs, the other rigs are working fine.

When I stop the miner, disable the auto run of it, and restart the rig I'm still unable to run WinAMDTweak.

Please advise if I can perform any testing/debug steps in order to assist you to debug the issue.

Regards

P.S. Also, the tweaking always seems to start at profile 2, no matter how and where I set it. Manually increasing does work. I followed the instructions, so what could be up?

Hello,

I have never been able to get any version / driver combination completely stable for my single Vega 56 (1450/935 MHz, 925/925 mV).
Also playing around with voltages and freqs could not prevent the occassional crash.

Now I'm using 1.8.8 on 18.6.1, and besides crashing it also usually drops to half the hash rate.
It is my only GPU so I have three monitors connected, does that cause any of this perhaps?

Does anyone have a suggestion to solve it?

Thanks!

I can't figure out why sometimes (usually?) the tweaking profile doesn't apply when set from the command line. Nothing in the log I can see. It just says tweaking enabled like usual.
I can always hit +/- to manually set the tweak in this case. I'm launching from awesome miner service (run as administrator). Can you put some extra logging to figure this out?