SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 17.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: hitmandn on June 06, 2019, 05:50:56 AM

Quote from: doktor83 on June 06, 2019, 05:31:00 AM

Quote from: hitmandn on June 06, 2019, 04:40:17 AM

Quote from: doktor83 on June 05, 2019, 10:50:38 PM

I am looking into fixing this 'invalid job id' issue, my guess is it happens shortly after the precompilation part. For some reason gpu gets stuck working at the old job if newer was received.

@hitmandn something aint right there, a rx470 should need no more than 20 sec to precompile a program, yours are doing it for 3 minutes!
What drivers are you using? Have you tried 18.6.1 or the newest adrenaline 2019?

I'm using Driver Fixdag. I tried 18.6.1 but hashrate to slow ( ~4xx )

Probably need to switch to compute mode, you can do that with SRBMiner, also that needs to be done only once

How to switch to computer mode with SRBminer, i'll try it.
THanks

open a cmd prompt with admin privileges and run :
SRBMiner-CN.exe --setcomputemode

hitmandn

newbie

Activity: 35

Merit: 0

Quote from: doktor83 on June 06, 2019, 05:31:00 AM

Quote from: hitmandn on June 06, 2019, 04:40:17 AM

Quote from: doktor83 on June 05, 2019, 10:50:38 PM

I am looking into fixing this 'invalid job id' issue, my guess is it happens shortly after the precompilation part. For some reason gpu gets stuck working at the old job if newer was received.

@hitmandn something aint right there, a rx470 should need no more than 20 sec to precompile a program, yours are doing it for 3 minutes!
What drivers are you using? Have you tried 18.6.1 or the newest adrenaline 2019?

I'm using Driver Fixdag. I tried 18.6.1 but hashrate to slow ( ~4xx )

Probably need to switch to compute mode, you can do that with SRBMiner, also that needs to be done only once

How to switch to computer mode with SRBminer, i'll try it.
THanks

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: hitmandn on June 06, 2019, 04:40:17 AM

Quote from: doktor83 on June 05, 2019, 10:50:38 PM

I am looking into fixing this 'invalid job id' issue, my guess is it happens shortly after the precompilation part. For some reason gpu gets stuck working at the old job if newer was received.

@hitmandn something aint right there, a rx470 should need no more than 20 sec to precompile a program, yours are doing it for 3 minutes!
What drivers are you using? Have you tried 18.6.1 or the newest adrenaline 2019?

I'm using Driver Fixdag. I tried 18.6.1 but hashrate to slow ( ~4xx )

Probably need to switch to compute mode, you can do that with SRBMiner, also that needs to be done only once

hitmandn

newbie

Activity: 35

Merit: 0

Quote from: doktor83 on June 05, 2019, 10:50:38 PM

I am looking into fixing this 'invalid job id' issue, my guess is it happens shortly after the precompilation part. For some reason gpu gets stuck working at the old job if newer was received.

@hitmandn something aint right there, a rx470 should need no more than 20 sec to precompile a program, yours are doing it for 3 minutes!
What drivers are you using? Have you tried 18.6.1 or the newest adrenaline 2019?

I'm using Driver Fixdag. I tried 18.6.1 but hashrate to slow ( ~4xx )

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: 2Lexx1 on June 01, 2019, 04:50:55 AM

Hi livada and doctor

I have same problem after 1.8.8 - Failed to load EIO.dll
One start srb 1.8.8 and i take this problem with amdtweaker.
Reboot rig - same.
Help me pls.
(and i newbie and PM not work)

I dont like reinstall win.

Use the latest 189 version it does not interfere with the eliovp tool

doktor83

hero member

Activity: 2548

Merit: 626

I am looking into fixing this 'invalid job id' issue, my guess is it happens shortly after the precompilation part. For some reason gpu gets stuck working at the old job if newer was received.

@hitmandn something aint right there, a rx470 should need no more than 20 sec to precompile a program, yours are doing it for 3 minutes!
What drivers are you using? Have you tried 18.6.1 or the newest adrenaline 2019?

hitmandn

newbie

Activity: 35

Merit: 0

Quote from: doktor83 on May 23, 2019, 05:41:32 AM

Quote from: hitmandn on May 22, 2019, 11:05:28 PM

Hi team

I have 9 mine Rigs use rx 470
Sometime all of them has same issues below

[2019-05-23 10:35:52] json_receive[259]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0bb8aa98e70559de9e62ca77708cf1ad3cadf4cffa2898c9fb220e3f2f6bb54cc729d1b3be2e0 00000006f1c48800660941e0cd2da3101431efb1d04f0d1f57b68923f2f44294917be3202","job_id":"27518","target":"cf8b0000","height":1840555}}
[2019-05-23 10:36:47] watchdog: GPU0 [BUS: 3] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU1 [BUS: 5] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU2 [BUS: 6] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU3 [BUS: 7] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU4 [BUS: 1] hashing speed is 0 H/S
[2019-05-23 10:36:47] watchdog: GPU5 [BUS: 4] hashing speed is 0 H/S
[2019-05-23 10:36:51] json_receive[259]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0b0bf2aa98e7058aa992fcacf54f6b6b27e548d4d674e1be98611f3cbf49de0b264e078d6bb9130 0000000acbfdbf080ca1ea35f6ea55ea52d8814648fab56e91d7b6f8e21d06adc20eb030f","job_id":"27519","target":"cf8b0000","height":1840556}}
[2019-05-23 10:41:37] Startup monitor attached

How about that
Here is my config pool
{
"pools" :
[
{"pool_use_tls" : false,
"pool" : "xmr-asia1.nanopool.org:14444",
"wallet" : "41hgaCaFC......3NS6n6znSJoFEWN1pUcjG.a75df28f221a445a2174115d8f7a5a07c798071535 be256e1234567890abeef8.Mi9/[email protected]",
"password" : "x",
"location" : "europe"},

]
}

This happens shortly after the message "Precompiling program" ?
If not, describe is the miner crashing, or what is happening.
Also upload log somewhere so i can take a look at it ?

Yes, that happens no shortly after the message "Precompiling program". Sometime i must restart My Rig for that
You see below
http://s1251.photobucket.com/user/hitmandn/media/bug3.png.html?sort=3&o=0
http://s1251.photobucket.com/user/hitmandn/media/Bug.png.html?sort=3&o=1
http://s1251.photobucket.com/user/hitmandn/media/bug2.png.html?sort=3&o=2
https://i1251.photobucket.com/albums/hh553/hitmandn/bug2.png

livada

newbie

Activity: 417

Merit: 0

Quote from: 2Lexx1 on June 01, 2019, 04:50:55 AM

Hi livada and doctor

I have same problem after 1.8.8 - Failed to load EIO.dll
One start srb 1.8.8 and i take this problem with amdtweaker.
Reboot rig - same.
Help me pls.
(and i newbie and PM not work)

I dont like reinstall win.

just delete SRB miner CACHE folder and restart comp.

proffe14

newbie

Activity: 96

Merit: 0

SRBminer - whether released for HIVEOS? Planned or not?

2Lexx1

newbie

Activity: 4

Merit: 0

Hi livada and doctor

I have same problem after 1.8.8 - Failed to load EIO.dll
One start srb 1.8.8 and i take this problem with amdtweaker.
Reboot rig - same.
Help me pls.
(and i newbie and PM not work)

I dont like reinstall win.

amorphis22

newbie

Activity: 11

Merit: 0

Hi Doc!

Thank you for great miner.

But I have a problem with the last

Periodically, one of my rig gets stuck with (all red messages)
[2019-06-01 09:42:14] json_receive[74]: {"id":6219,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-06-01 09:42:14] miner_result: GPU5[BUS:26] result rejected for job[161] [invalid job id]
[2019-06-01 09:42:37] json_send[237]: {"id":6220,"jsonrpc": "2.0","method":"submit","params":{"id":"4553b35d-3168-4ae2-a1cc-72082ba2f832","job_id":"XlqBxuAKQJGiynQXXaJybrzA+SoT","nonce":"1c001857","result":"ad5af10ea1afa641bc7539381073cc59e96e9c7143081da29e2b9b70fc2f0000"}}

And its the only way to restart/reboot.

My config is:
{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"tweak_profile" : 10,
"min_rig_speed" : 12000,
"min_rig_speed_duration" : 50,
"reboot_script_gpu_watchdog" : "reboot-windows.bat",
"reboot_script_min_rig_speed" : "reboot-windows.bat",
"double_threads" : true
}
But in a case when it come - no settings (min_rig_speed) not working
Please, help

GKumaran

member

Activity: 204

Merit: 10

Quote from: issie81 on May 31, 2019, 04:34:46 PM

Quote from: abg00 on May 28, 2019, 09:30:31 AM

Quote from: issie81 on May 28, 2019, 08:09:41 AM

when i start miner with --cgputweakprofile 9,9,9,9 then the miner doesn't set level on 9

confirm. work only in gpu_conf

Dok will you fix this? i think setting --cgputweakprofile then the miner should pick up the value, no?

Come on dude, its not that difficicult to read the instructions !! Huh

Quote

--cgpuid 0,1,2,3 --cgpuintensity 0,0,0,0 --cgputhreads 2,2,2,2 --cgputweakprofile 9,9,9,9

Read the damn page 1 or readme or this forum !!!
u NEED to specify the gpu, intensity and threads if u are gonna use the gputweaks from command line.
U are replacing the config.txt with your command line param, dont u think the config.txt contents should be mentioned in the command line??

The dev has posted multiple time of this in the thread and still no one reads !!

issie81

hero member

Activity: 760

Merit: 500

CryptoZilla

Quote from: abg00 on May 28, 2019, 09:30:31 AM

Quote from: issie81 on May 28, 2019, 08:09:41 AM

when i start miner with --cgputweakprofile 9,9,9,9 then the miner doesn't set level on 9

confirm. work only in gpu_conf

Dok will you fix this? i think setting --cgputweakprofile then the miner should pick up the value, no?

thenextdinosaur

newbie

Activity: 13

Merit: 0

hey doktor, can you share the default intensity and work size for some of the algos SRB miner support? or is there some way to find this info?
I ask because I want to set the gpu_conf manually for multiple algorithms. There's some kind of bug that when changing algos one of my cards don't keep the minimum 3000 RPM, going to 900 RPM and making the card go to 100 oC. that is solved by setting the target_fan_speed manually but then I'd need to know the rest of the info that is used by default on each algo.

issie81

hero member

Activity: 760

Merit: 500

CryptoZilla

guys i have 16 rigs running and i saw that one rig was very low temp (which is very good with hot weathers coming)
so i was looking in Awesome Miner (i use AM to monitor) and saw this miner was running 1450 core and 935 mem the mem had 0.9volt
my other miners have 1.2volt which is why the temp is high i guess... so i taught maybe i have different ODNT setting but it's the same on all my machines
after a reboot volt went to 1.2 and temps 10c up... why is this happening is my ODNT not working.. if i look on miner it pushes the 1450 and 935 i set..
this is my ODNT startup settings:

GPU_P0=852;800;0
GPU_P1=991;900;0
GPU_P2=1138;950;0
GPU_P3=1269;1000;0
GPU_P4=1312;1050;0
GPU_P5=1474;1100;0
GPU_P6=1474;850;0
GPU_P7=1450;850
Mem_P0=167;800;0
Mem_P1=500;800;0
Mem_P2=700;900;0
Mem_P3=935;900
Fan_Min=3000
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=80
Power_Target=0

i use Windows 10 latest build with 18.6.1 drivers.. i assume my miners ignore the 900mV but pushing 1.2Volts?

FIXED UPDATED TO 2.7 OVERDRIVENTOOL

Bllacky

newbie

Activity: 22

Merit: 0

Quote from: Newguy8319 on May 30, 2019, 03:37:26 AM

Hello,

I'm knew to SRB miner and I'm having some difficulty. I followed instructions in the guide and can only manage to get.

Enumerating OpenCL devices, please wait...

Restarting miner...

Enumerating OpenCL devices, please wait...

Restarting miner...

Enumerating OpenCL devices, please wait...

Restarting miner...

Times infinity. I'm using the generic guided set up with V1.8.9 and 8.6.1 for my vegas. I'm not sure what else to add, any advice?

Try reinstalling the drivers using DDU.
Otherwise, it might be an indication of a faulty motherboard.

Newguy8319

newbie

Activity: 2

Merit: 0

Hello,

I'm knew to SRB miner and I'm having some difficulty. I followed instructions in the guide and can only manage to get.

Enumerating OpenCL devices, please wait...

Restarting miner...

Enumerating OpenCL devices, please wait...

Restarting miner...

Enumerating OpenCL devices, please wait...

Restarting miner...

Times infinity. I'm using the generic guided set up with V1.8.9 and 8.6.1 for my vegas. I'm not sure what else to add, any advice?

ipp2

newbie

Activity: 37

Merit: 0

I'm having an issue mining CNR with my polaris cards. While most of the time they mine just fine, sometimes they get stuck at the pre-compling section for a while (hours).

I can switch to say, turtle/loki and things run fine. All 4 rigs do the exact same thing at the same time. Like the pool or SRBminer struggles with certain types of blocks?

I'm still using the old trusty blockchain driver for the polaris cards - could this be an issue? Could it be the pool? Unlikely - I've tried supportxmr and minexmr both giving similar issues.

I also have a vega rig and it runs fine at the same time the polaris cards puke on me.

SmartOdissey

newbie

Activity: 29

Merit: 2

Quote from: Art Gar on May 29, 2019, 09:53:14 AM

Doc, could you join config, bat params and pools in one config file? not convenient when there are a lot of parameters in different files.

Thats right!
Need one config file, like HTTPD.conf in apache Grin

With comments to each parameter.
.bat file with params is weird. Grin

Art Gar

newbie

Activity: 22

Merit: 0

Doc, could you join config, bat params and pools in one config file? not convenient when there are a lot of parameters in different files.

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 17. (Read 237261 times)