SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 207.

livada

newbie

Activity: 417

Merit: 0

Quote from: vmozara on July 04, 2018, 06:39:07 AM

Livada,

can you show 24 hours average, or hash count since start of the miner?

i dont. i not mine any coin 24 hour.

Can you to show 2 hour HR test with srbminer-cast-xmrstack? No . but ask me. GO spam other topic not this.
You dont have any but SPAM not work this - miner use this- dev cheat with HR etc...
and now you wont all test for you . spamer.

post here SS srbminer - send SS cast and xmrstack 1-2-3 day . i wont see this HR and after this send 2-3 day srb miner with identical pool.

all other is off- you must send SS castx and xmrstack and srb miner - all 2-3 day and after this i go investigate why this. before i not belive you.

for test- use NH and try. you say not look 2 hour look 6 hour. Why? nh have 10 min statistic. Why i wait 2 day? after 1 hour i have identical HR . i not look in my monitor 2 day- 1-2 hour ok iand i try. HR is identical. 5 min HR beter 5 min is lower but after 1 hour HR is stabilize and give identicla HR. if you think 100HR for 11 card is CHEAT-ok. i not think this.

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: vmozara on July 04, 2018, 06:39:07 AM

Livada,

can you show 24 hours average, or hash count since start of the miner?

dingdongtobias,
thanks for the link, I will update them over there. I did not pay attention to CAST so much, as I never liked that miner and moved immediately away, so i have 0 screenshots, proofs or research.

i can't find any of your screenshots for srb neither, probably because there aren't any.

Here is my screenshot 24h average on nanopool :
https://bitcointalksearch.org/topic/m.40640415

Also I did a 6 hour test for Xmr Stak you said it shows you the exact same hashrate like the pool side, but not in my case :
https://bitcointalksearch.org/topic/m.41077478

JCE I did not test yet, but i will give it a try.

Also DragonMike, where are your screenshots? Are you even using srbminer ?

ipe4enko

newbie

Activity: 34

Merit: 0

Some statistic on pool with srb and xmr-stak miner.

http://joxi.ru/BA0W5oECJp9vW2

As we can see after change miner and all 11 card working, whitespace under red line almost absent

In console Xmr-stak show only 5480 H/s, but SRB-miner show 5600 H/s. On pool SRB miner show a little lower hash rate, about 500.

vmozara

member

Activity: 190

Merit: 59

Livada,

can you show 24 hours average, or hash count since start of the miner?

dingdongtobias,
thanks for the link, I will update them over there. I did not pay attention to CAST so much, as I never liked that miner and moved immediately away, so i have 0 screenshots, proofs or research.

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: livada on July 04, 2018, 06:28:14 AM

Quote from: dingdongtobias on July 04, 2018, 06:20:17 AM

Quote from: vmozara on July 04, 2018, 06:01:13 AM

I never called anybody a cheater, I just wanted to point out there is an issue, issue that your clients cost money, and you don't care to provide a simple elaboration or just ask if I could provide more details.

Therefore, it is not you who are out, it is me who is out from your broken/cheating miner, but I will not be out of this topic - every time somebody asks about missing hashrate I will not allow forum trolls to stomp on the guy, instead I will try to explain what happens and how to calculate the hashrate and see himself if srbminer is good for him or not.

Don't forget to go to XMR CAST thread also and tell them not to use that broken/cheating CAST miner.
Here, let me help you, here is the link : https://bitcointalksearch.org/topic/cast-xmr-high-speed-xmrcryptonight-miner-for-rx-vega-gpus-2-khashs-2256917

And see this situation. Srbminer say 8200HR and i go on cryptoknight.cc pool and i see 9700HR. Fuking miner CHEAT. POOL give more money

Srbminer say lower than pool

i must report this. i dont wont more money Grin

[irrelevant screenshots removed]

We're not talking about real-time fluctuation, you dimwit. We're talking about long-term averages. Also, when did anyone here call doktor83 or glph3k cheaters? We're noticing an unwanted behaviour and require explanation and/or fix. It's not rocket science.

livada

newbie

Activity: 417

Merit: 0

Quote from: dingdongtobias on July 04, 2018, 06:20:17 AM

Quote from: vmozara on July 04, 2018, 06:01:13 AM

I never called anybody a cheater, I just wanted to point out there is an issue, issue that your clients cost money, and you don't care to provide a simple elaboration or just ask if I could provide more details.

Therefore, it is not you who are out, it is me who is out from your broken/cheating miner, but I will not be out of this topic - every time somebody asks about missing hashrate I will not allow forum trolls to stomp on the guy, instead I will try to explain what happens and how to calculate the hashrate and see himself if srbminer is good for him or not.

Don't forget to go to XMR CAST thread also and tell them not to use that broken/cheating CAST miner.
Here, let me help you, here is the link : https://bitcointalksearch.org/topic/cast-xmr-high-speed-xmrcryptonight-miner-for-rx-vega-gpus-2-khashs-2256917

And see this situation. Srbminer say 8200HR and i go on cryptoknight.cc pool and i see 9700HR. Fuking miner CHEAT. POOL give more money

Srbminer say lower than pool

i must report this. i dont wont more money Grin

https://image.prntscr.com/image/yfzwj84JTUKzhLdJpmou3Q.jpg
https://image.prntscr.com/image/tcrt2-j3ScKLEZ_VF3HI0w.jpg

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: vmozara on July 04, 2018, 06:01:13 AM

I never called anybody a cheater, I just wanted to point out there is an issue, issue that your clients cost money, and you don't care to provide a simple elaboration or just ask if I could provide more details.

Therefore, it is not you who are out, it is me who is out from your broken/cheating miner, but I will not be out of this topic - every time somebody asks about missing hashrate I will not allow forum trolls to stomp on the guy, instead I will try to explain what happens and how to calculate the hashrate and see himself if srbminer is good for him or not.

Don't forget to go to XMR CAST thread also and tell them not to use that broken/cheating CAST miner.
Here, let me help you, here is the link : https://bitcointalksearch.org/topic/cast-xmr-high-speed-xmrcryptonight-miner-for-rx-vega-gpus-2-khashs-2256917

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on July 04, 2018, 05:16:52 AM

Quote from: abg00 on July 04, 2018, 05:11:03 AM

Quote from: doktor83 on July 04, 2018, 04:49:32 AM

V1.6.2

- Fixed miner crash when using a non AES capable CPU on some algos

- Added info about CPU AES support in log

have aes kernel error on rx550 card 2gb

don't copy this version over older ones, or if you do, delete .srb files.

work but rate poor and need set lower intensity
was 5170 from 12 rx550\2gb in 1.4.3 Intensity 27
now 4870 in 1.6.2 Intensity 26

algo normalv7

livada

newbie

Activity: 417

Merit: 0

Quote from: RuMiner on July 04, 2018, 06:06:11 AM

livada do you have Vega64 firmware on your Vega56? My 56's don't overclock mem over 970 MHz on stock bios. That is the difference obviously. Vega64 didn't change hashrate, too.

samsung have 64bios - 1100mem/905mv - 3vega from wall -530-540W v7algo - 520W heavy algo
hynix have stock bios - 900-990mem /940mv - 6vega nitro 1030-1040W v7 algo - 1020W heavy algo

u must use softpowertable for this.

this is hynix nitro+ with 64bios but reset every 10- 15 hour -stock is beter option
https://image.prntscr.com/image/JNQz5ihgSzaCs0Dk5H9dYQ.jpg

and this is identical miner but all card have stock bios- nitro+ hynix

https://image.prntscr.com/image/gi8kK6N2S6WKIjl6rH4g1A.jpg

livada

newbie

Activity: 417

Merit: 0

Quote from: dragonmike on July 04, 2018, 05:51:54 AM

Quote from: doktor83 on July 04, 2018, 05:36:42 AM

Quote from: dragonmike on July 04, 2018, 05:23:39 AM

Quote from: doktor83 on July 04, 2018, 05:18:26 AM

Quote from: dragonmike on July 04, 2018, 05:15:52 AM

Quote from: dingdongtobias on July 03, 2018, 06:09:25 PM

Quote from: vmozara on July 03, 2018, 04:18:47 PM

Guys,

first, thanks to all that didn't care and made fun of me when I reported missing hashrate problem. I tried hard to explain that the cast-xmr and srbminer report incorrect or inconsistent hashrate, for example my vega rigs are hashing up to 20% less on the pool than what the miner reports, just to be stomped by armada of forumeers who try to teach me basic math, finally, I was advised to find another miner if I don't like this one - and I did

last few days I tried new miner called JCE, the guy just made a beta version for GPUs, and my Vegas not only hash better than SRBminer (7xVega 56 14350) but every single hash is counted by the pool properly. This leads me to conclusion that srb and cast have issues with counting or are reporting false hashrate. I will now support new guy and his miner.

If doktor83 ever cares to fix this problem, I will be happy to provide support and more details.

Have fun and enjoy your mining

I am glad you finally found something that is working for you.
But please, next time don't come back just to advertise another miner.

It's a very very pertinent and valid observation however.
Especially since JCE is claiming a lot of devs "cheat" with their closed-source miners. If his miner's hashrate coincides with what the pools report - and SRB, Cast etc do not - there is a problem, isn't there?

Someone who works on a closed source miner says that closed source miners cheat and steal, ironic

As always, i say : nobody forces you to use SRBMiner, if you think something is not ok, don't use it

That's not really a satisfying answer however!... And completely avoids the point.
Do you have a logical explanation for the behaviour? Why would hashrate produced by your miner reported by the pool be noticeably lower than JCE's?

because all miners steal and his is the only one not doing that is the answer you want to hear.

i am really tired of discussions of this type, so i am out.

Wrong, it's the answer I DON'T want to hear.
But so far I have not got any acceptable answer. Whether you're tired of discussions of this type (which haven't featured hardly at all in this thread until now by the way, and I've been contributing in it from day 1 - so a bit quick to be tired about them I would think) or not. Provide a logical explanation/theory. If not, all props to you. But don't blame people for calling it out.

i dont wont read your mesage but i read. go ask your POOL DEV why you cheat . I post before 5-7 day my situation. Miner work OK. You say not work ok. Go use other miner and this is it. Chg your pool. i use nano and rock and miner HR is identical for nano or rock HR. you say not. ok i not trust you you not trust me and ok .go use other miner i use this and all happy.

RuMiner

member

Activity: 168

Merit: 15

livada do you have Vega64 firmware on your Vega56? My 56's don't overclock mem over 970 MHz on stock bios. That is the difference obviously. Vega64 didn't change hashrate, too.

vmozara

member

Activity: 190

Merit: 59

I never called anybody a cheater, I just wanted to point out there is an issue, issue that your clients cost money, and you don't care to provide a simple elaboration or just ask if I could provide more details.

Therefore, it is not you who are out, it is me who is out from your broken/cheating miner, but I will not be out of this topic - every time somebody asks about missing hashrate I will not allow forum trolls to stomp on the guy, instead I will try to explain what happens and how to calculate the hashrate and see himself if srbminer is good for him or not.

livada

newbie

Activity: 417

Merit: 0

Quote from: RuMiner on July 04, 2018, 05:25:40 AM

Quote from: doktor83 on July 04, 2018, 05:18:57 AM

Quote from: RuMiner on July 04, 2018, 05:14:49 AM

upd hashrate lowered since 1.6.1 on Vegas 56 Sad

about 20 h/s per card

It shouldn't be . Algo and settings?

normalv7, intensity 112.
rig Vega56x4, was 7900 -> 7820
rig Vega56x8, was 15540 -> 15250
auto intensity got 119, last rig lowered to 15150

vega 56 have best HR with 112/16 v7 and 56/8 heavy. i have colorpower(samsung) and saphire nitro(hynix) this is bes setup for vega 56 card
vega 64 wont 120/8 v7 and 60/8 heavy.

HR is identical or better on 1.6.2 version.

veg56/64bios samsung - 2000+HR
veg56/stock hynix - 1850-1900HR
https://image.prntscr.com/image/S7hq0o12RGq5Rk5Z3Y8qmQ.jpg