SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 218.

twotwosix

newbie

Activity: 118

Merit: 0

Quote from: dingdongtobias on June 19, 2018, 11:59:27 AM

Quote from: twotwosix on June 19, 2018, 10:40:34 AM

Quote from: doktor83 on June 19, 2018, 06:30:17 AM

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite and with 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Kraft and works fine.
Tried 1.6.0 with Kraft and down a lot the hashrate with same settings .

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0 -24 hours average hashrate 60-62kh/s

You must be a magician if you can mine stellite with 1.4.2 version.

Also there is no Kraft coin. There is craft but that's not cryptonight algo.

sorry is Graft. and i have saved the hasrate in old algo stellite with 1.4.2. with the new algo mi hashrate drop 6-8 kh/s in pool, in srbminer shows more

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: twotwosix on June 19, 2018, 10:40:34 AM

Quote from: doktor83 on June 19, 2018, 06:30:17 AM

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite and with 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Kraft and works fine.
Tried 1.6.0 with Kraft and down a lot the hashrate with same settings .

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0 -24 hours average hashrate 60-62kh/s

You must be a magician if you can mine stellite with 1.4.2 version.

Also there is no Kraft coin. There is craft but that's not cryptonight algo.

twotwosix

newbie

Activity: 118

Merit: 0

Quote from: doktor83 on June 19, 2018, 06:30:17 AM

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Doktor why with versión 1.4.2 nofee i get 67-72 kh/s stellite before new algo, and after with new algo 1.6.0 only 58-70 (miner show 70.5) same pools? A lot of less, not only 0.85%.

Tried 1.4.2 with Graft and works fine.
Tried 1.6.0 with Graft and down a lot the hashrate with same settings.

The miner show a bit more hashrate on 1.6.0, but in the pools show a lot less.

1.4.2 imagreedybastard -24 hours average hashrate 67-69kh/s
1.6.0 -24 hours average hashrate 60-62kh/s

Sgsg666

jr. member

Activity: 113

Merit: 1

Quote from: doktor83 on June 19, 2018, 06:30:17 AM

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Okay my bad, I may have just copied some of the miner files and not the whole set. I will report back if I find any in this new download. Grin

edit: deleted my posts, miner is now working properly.

Kriss.Kross

member

Activity: 102

Merit: 40

Iam mining Loki (CN-Heavy) on 6x HIS RX460 2GB, with a single thread intensity max value is 28 and for double thread intensity max value is 14. But the single thread hashrate more higher than a dual thread hashrate ... it is normal ?

altsay

sr. member

Activity: 359

Merit: 250

Quote from: DStefanov on June 19, 2018, 04:02:10 AM

Hi,

Please give a config.txt file for AMD RX280X!
Thanks

I was waiting for that, too

MaxMidnite

newbie

Activity: 143

Merit: 0

Quote from: doktor83 on June 19, 2018, 06:30:17 AM

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

Any plans for Nvidia Support?

majdi105

newbie

Activity: 64

Merit: 0

thank you but why it don't detect my rx 470 mining edition ?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ?? on ??

Link must be broken, new one https://mega.nz/#!OaYRVJTI!Z5dsgQTfMxlVrn9fNdqdNvG36eIAx4smfpagUxMiM2U. Watchdog has done a failed reset. It didn't mine after that last part so...

this is v 1.5.8, please use latest as maybe the bug you are experiencing is fixed.

meihk

newbie

Activity: 12

Merit: 0

Quote from: dingdongtobias on June 19, 2018, 12:25:56 AM

Quote from: meihk on June 19, 2018, 12:10:41 AM

yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap..

Your problem n2, there is info in the logs when hashing speed is 0, so you CAN identify the card that crashed.

okay, but did not see anything like that in the logs. my rig goes into bluescreen, i think this kind of issue is related to the Overdriventool. so far 6 hours running with thesame settings..

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ?? on ??

Hi @doktor83 looks like the --resetfans is automatically applied even when not present on .bat? my fan settings have been reset. Also gpu watchdog/min rig speed crash the miner Huh

.

6 hours of downtime. "persistent_memory" isnt on. logs https://mega.nz/#!XGBFAYoQ!63Zg83uEkNwcH5E5sI9pvhHN-YZFBQI9rz2521NMFGM edit: i have set the miner to high priority(it may have an effect?)

--resetfans isn't automatically applied, only if added in .bat.

The screenshot you inserted is not showing what you are saying: min rig speed. What i see on the image is that the watchdog resetted the miner successfully, cause a new miner instance was started.
And you did not upload the log file, you uploaded this same screenshot.

DStefanov

sr. member

Activity: 425

Merit: 250

Hi,

Please give a config.txt file for AMD RX280X!
Thanks

dingdongtobias

newbie

Activity: 156

Merit: 0

Quote from: meihk on June 19, 2018, 12:10:41 AM

yes, need to disable the OverdiveNtool Pstate from p1 to p6, To do this click on P0, P1.. etc. label. and i think this also related to my problem no.2, i will observe for 24 hrs and give feedback here asap..

Your problem n2, there is info in the logs when hashing speed is 0, so you CAN identify the card that crashed.

meihk

newbie

Activity: 12

Merit: 0

Quote from: dingdongtobias on June 19, 2018, 12:02:17 AM

Quote from: meihk on June 18, 2018, 11:00:01 PM

Quote from: meihk on June 18, 2018, 07:41:21 AM

Quote from: dingdongtobias on June 18, 2018, 07:35:01 AM

Quote from: meihk on June 18, 2018, 05:43:27 AM

Quote from: dingdongtobias on June 18, 2018, 05:27:51 AM

Quote from: rednoW on June 18, 2018, 04:13:07 AM

Quote from: meihk on June 18, 2018, 04:11:00 AM

hello @doktor83,

1. I run V1.6.0, i found 1 issue when miner disconnect from pool and reconnect again the voltage setting of GPU restored to default. how to solved this? pls if anyone having thesame issue and solved please advice me. ***temporary solution: i run task scheduler for Overdriventool every 30min.

2. The SRBminer log cant record the GPU hangs before PC restarted. in this case i am having problem identifying which GPU need to re-tune.

I have 8x GPU RX 580 8gb with total 8.3kh on CN Heavy...

thank in advance.

I still use 1.4.3 sometimes with greedy bastard mode - most stable for me. All newer versions have problems with devfee switching, hash drop and downvolt settings made with overdriventool fail.

So not true. I had problems with devfee switching on older versions sometimes, on versions after 1.5 no more problems.
Using 1.6.0 on 12 rx580 rigs without problems mining haven.

You dont have any thesame problem? what is your driver version? what tool you use to undervolt?

I have no problems at all.
Using win 10 x64 ver 1703
Blockchain drivers
OverdriveNtool for undervolting

And its not doing anything with the voltage on pool connections

what did i missed? xmr-stak dont have problem like this... maybe back to xmr-stak... thx any way..

Ifound solution on my problem n0. 1... tnx to Google Search!!!

Voltage reset? Mind to share what did you do, maybe someone else has the same problem.