Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 269. (Read 237293 times)

Tricky :-)

I also think, that the lower difficulty after devfee is NOT the reason because i set a static Diff.

Algo: Heavy, last Version of GPU-Z

Hashrate shouldn't drop after devfee mining, because when switching do devfee pool, user pool is not disconnected, it's running in the background, and when devfee finishes it just takes work from user pool and continues hashing. User pool can lower difficulty because user is not sending shares for 1 minute, but i don't believe that should be a reason for the hashrate to drop.

Also it would be nice to know what is gpuz doing

Hello guys,

In heavy algorithm I use 1300 mhz core and depending on memory type (Samsung, Micron...) some cards work on 2000 mhz and some others on 2150 - 2200.
What do you suggest for voltages on both core and memory?
Right now I use core 975 mv and mem 1000 mv. Is it good or I can lower it a little more to save energy?
Cards are RX 580 8gb.

Thanks in advance!

Doc, I can confirm, that my RX580 cards with 8GB get a Hashrate drop after Pool switch / dev Pool. After start and close GPU-Z while miner is running, the max. Hashrate come back again.

Would be nice to implement the „Magic Function“ to the Miner :-)

Greetings from Germany
Oliver

"gpu_conf" :
[
   { "id" : 1, "intensity" : 56, "worksize" : 16, "threads" : 2}
]
}

tried with different worksize


-----------------------------------------------------

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_SINGLE_ALLOC_PERCENT 100
set GPU_FORCE_64BIT_PTR 1

@echo off

cls
SETLOCAL EnableExtensions
set EXE=SRBMiner-CN_svega.exe

:START
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING
%EXE% --config config_s2.txt --pools pools_h.txt
TIMEOUT /T 15 /NOBREAK
goto START
:RUNNING
echo "%EXE% is already running"
pause

-----------------------------------------------------

with that setting should able to get 1400+ or 1500+, maybe you need to post your config also.

1408/1099 water cooled so hbm around 50°C

what is your cclock and mclock? is it blockchain driver or 18.3.4?

why so angry?

i read this topic last 2 weeks

intensity 60 = 800hs, kill process and start with 56 = 1200hs

thanks

your HBCC memory not work. i tel you read last 10 page.

push intensity  60 and close and push intensity back to 56 and hbcc work

READ TOPIC.  READ last 10 page.
everything has already been written several times

1500+ is far fetched using similar settings that Vega used to mine CN-V7.

only get around 1200 with 56 intensity worksize 8 (also with 16)  and 2 threads

Edit: vega56 with 64 BIOS

I think I found a bug, I place all same algo coins in my pool txt (pool-allheavy.txt etc. etc.) and I may switch pools based on network difficulty, when SRB detects a gpu crash, it starts from the first coin in list, even though I manually switched to some coin. I think it should remember the last selected pool.


I too agree defining which config to use and pool list to use provide better abstraction. That said, dynamic reload of specified pool.txt would be nice.

Instead of ctrl+number to switch, you could also have a delayed switch, so you don't disconnect and connect several times. I made this advice a few pages ago, I hope Doktor takes either one of us into account!

My Windows Defender Removed it and and declared it as "severe" I have no options.. Is there any download link to the download a clean file?

read last 5-6-9 page- all in there.

intensyti = 56

vega 56 vith 64 bios  = 1500HR on heavy

Any optimisation fore VEGA cards in heavy algo?

This is not claymor this is SRBMINER and i i dont wont this option. i wont option with pool and config. Go use claymor if you wona all like claymore.
Now i have 5-6 bat file . in claymor i must have 50. bat file.

Easier? how?


now pres P and this is it. you go on nex pool on list.

if you wonna use diferent algo you must start other start.bat

i have more start.bat: heavy.bat - v7.bat - lite.bat  etc..

heavy.bat call heavy-pool.txt and  config-heavy.txt . in pools-heavy.txt i have all heavy pool(heavy-sumo its)
%EXE% -c config-heavy.txt --pools pools-heavy.txt

v7.bat call config-v7.txt and pools-v7. in pools-v7. i have all v7 pool (xmr-msr-stl etc)
%EXE% -c config-v7.txt --pools pools-v7.txt

pools" :
[
{"pool_use_tls" : false, "pool" : "masari.superpools.net:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "stellite.ingest.cryptoknight.cc:16222", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool.graft.spacepools.org:5555", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "pool.supportxmr.com:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
{"pool_use_tls" : false, "pool" : "dallas.itnspool.net:7777", "wallet" : "address", "password" : "x", "location" : "europe"},
]
}

and now i pres P and go on next pool. This is EASY

Problem with p is: in v7 i have in pool list 10-15 pools.
Doctor pls give me option CTRL+5 CTRL+8 for direct call 5 pool on list. pls. or press P for choise list pool on pool.txt

And dont change any with pool list and config.txt. Now is  excelent.

BUS = 0 for every card, use newer drivers because your BUSID-s are no detected, then it will be good.

To DeV,

SRBMiner will support nvidia GPU card in future?

Exactly! This will make switching pools much easier.