Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 285. (Read 237280 times)

Actually by setting intensity 60 and work size 8 it will work also (enable HBM) after that you close the miner set intensity 56 then run the miner again it will increase hash rate. but still a bit difficult to automate.

but works:)

DOKTOR read this pls. Why i must start xmr-stak for enable HBM? enable-disabe card in device manager not work.

Does the API work with EthMan (Claymore Remote Manager)?

So the API lets us read the stats while mining, is it possible to change pool/algo with just command line options or do you need the config files.

Thanks - have confirmed that strangely your suggestion works. Now at 4405 h/s. Maybe this issue wouldn't exist on the latest Adrenaline drivers?

Thank you for adding it in Forager Cheers!

Thanks for adding API

Added miner to Forager - automatic profit switching miner

Well if you have all your rigs at one place just setup an ordinary PC as Radmin server. I use TW to access that PC and just use the depoly tool in Radmin to push instalation to all the miners.

Awesome Miner is yet to support SRBMiner (hope soon).

dont leave on auto intesity, lower it by hand.

I'm having problems with the alloy algorithm.  About 50% of the time when I check hashrate, 1 or 2 of my GPUs will report 0.  A few seconds later, they will be back to normal (or new ones will report 0).  This happens on all of my GPUs (rx580s).

I not use overdriventool. i use only watman.
power target is default
this is all what you need
gpu and mem mhz and mv power.
this is gpu for p7

EDIT: i dl overdrive and this is SS . i not use ovedrive i use watman. This is only for this SS
https://image.prntscr.com/image/MiKMDVu8R0aM2lDch2kFeg.jpg

EDIT 2 : GPUz SS - GPU Z shut down HBM memory and i must again use xmr-stak for enable HBM
https://image.prntscr.com/image/xuVWWQbuS_6aKHDhJSb9eA.jpghttps://image.prntscr.com/image/FIIBH1ikQr2fG5XoagMEtQ.jpghttps://image.prntscr.com/image/CnZjke6dQimk6DSA27SP1Q.jpg

Not everything is available open source.  eg. checkout Awesome miner.

I have 15 rigs mining with SRBminer. (84 cards)

But, every time that a new version comes it takes me a lot of time to update all the rigs.

So..
My question is this: is there any Rig management software or something similar for Windows?

A software that can be used to update all the rigs at once?
A software that can connect to each machine (rig) and execute for example a script or batch of commands for each computer?

I wonder..
How do these people or companies that have a greater number of cards or a huge farm of GPUs like Genesys Mining to solve these problems?

@livada
GPU - 1442/1437/1407mhz 905-907mv
MEM - 1095/1100mhz 900mv
power target = ??

please share overdriventool settings or powerplay settings
thnks

your HBM memory not work. reset card and start again.

If HBM not work i have only 1300-1350 per card and i must start xmr-stak and back to srbminer. WHY? i dont now.

Doctor any idea? i reset card but  HBM not start. when i use xrm stak with this xomand HBM start normal and after this all miner work fine with HBM memory.

This option start HBM memory
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
start xmr-stak --noCPU
exit 0

"verbose_level" : 3,
"print_motd" : true,
"h_print_time" : 60,
"aes_override" : null,
"use_slow_memory" : "warn",
"tls_secure_algo" : true,
"flush_stdout" : false,

if i use xmr stak with this option HBM  start OK.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
{ "index" : 0, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 0, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 1, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 1008, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
{ "index" : 2, "intensity" : 904, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 16, "comp_mode" : true },
"platform_index" : 0,

after this start  HBB ON .Why ? i dont now.
with srb miner i try but never HBM start corect if not start first time.

if i use xmr stak with this otion HBM not start.

"gpu_threads_conf" : [
  // gpu: gfx901 memory:3920
  // compute units: 64
  { "index" : 0,  "intensity" : 896, "worksize" : 8,    "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 0,  "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },
{ "index" : 1, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 1, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,  "comp_mode" : true  },
{ "index" : 2, "intensity" : 896, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true },
{ "index" : 2, "intensity" : 864, "worksize" : 8, "affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2, "comp_mode" : true   },

I manage to get 4044 h/s using SRB with these sorts of clocks on my Vegas. What does your config file look like apart from intensity at 56?

omgSRBMiner API 

Paging Dr. Patrik from AM clinic

V1.5.1
- Finally added API, now you can monitor your rigs with 3rd party apps
- Added parameter "restart_devices_on_startup_script" in config file, if "restart_devices_on_startup" is used, this new parameter can run a batch file from the miner directory after resetting the GPU's

+ If you need to disable/enable your Vegas before mining, or after miner restart, you use the "restart_devices_on_startup" parameter.
You will probably want to set your overclocking settings after this (OverdriveNTool or something). This is what "restart_devices_on_startup_script" option is for, put the name of the batch file here (that is in miner directory), and set everything you need in that .bat.
After the devices are disabled/enabled, this batch file will run.

+ RESTful API IS HERE FINALLY

Now you got monitoring capabilities for your favorite rig monitoring tool. API is read only, that means you can't set anything, it just gives you back info about actual settings.
To turn on API use "api_enabled" : true in the config file. Default port is 21555, but you can change it using "api_port" parameter.
If you want you can name your rig with "api_rig_name" : "myrigname" so you can easily identify it in the monitoring app.
When enabled it returns a json string with lots of goodies. You can access it on http://127.0.0.1:21555.

Here is an example from a rig :

read 1 page:
V1.5.1
- Finally added API, now you can monitor your rigs with 3rd party apps
- Added parameter "restart_devices_on_startup_script" in config file, if "restart_devices_on_startup" is used, this new parameter can run a batch file from the miner directory after resetting the GPU's