SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 289.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: dragonmike on May 01, 2018, 03:55:25 AM

Quote from: jmigdlc99 on April 30, 2018, 09:47:21 PM

However, my mining hashrates for my Vega56s are hovering around 1750-1800 compared to 1800-1850 when i was using CastXMR. I already have intensity set to 100 and dual thread turned on. Any tips on how to increase hashrate further?

I have my Vegas (56 flashed to 64) at 112 intensity.
Dual threads and worksize 16.
Clocked at 1428/1135 they hash at 2000h/s.

@Citronick: Doktor83 is working on the API if I'm not mistaken, I think he confirmed it a few pages back.

That's great news.

Whats your wattage like?

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: jmigdlc99 on April 30, 2018, 09:47:21 PM

However, my mining hashrates for my Vega56s are hovering around 1750-1800 compared to 1800-1850 when i was using CastXMR. I already have intensity set to 100 and dual thread turned on. Any tips on how to increase hashrate further?

I have my Vegas (56 flashed to 64) at 112 intensity.
Dual threads and worksize 16.
Clocked at 1428/1135 they hash at 2000h/s.

@Citronick: Doktor83 is working on the API if I'm not mistaken, I think he confirmed it a few pages back.

Kicigz

newbie

Activity: 3

Merit: 0

I give some benchmark:
Only cryptonight heavy,blockchain driver, 1300core/2100mem, uber mix 3,1 (srb miner is much bether then cast or else):

rx470 4gb hynix 800 h/r,
rx470 4gb samsung 790 h/r,
rx580 4gb Powercolor samsung/hynix 817 h/r

only problem is primary card (attached dong on) with up to 4% low h/r (ON CAST AND CRYPTONIGHT HEAVY PRIMARI CARD IS 0 H/R)
https://imgur.com/a/GYwl8uy

xlm19877

member

Activity: 140

Merit: 20

Quote from: doktor83 on April 29, 2018, 08:57:06 AM

Quote from: xlm19877 on April 29, 2018, 08:16:21 AM

hello
when i run it om my rigs

all time the program close

i try to underclock and do all things but all time the program close

what i can do for that ??

need much more info, if you want help.

hello

what you want info

my card is 470x4
580x2

i try to undervolt to stock and same problem

rodyw

full member

Activity: 378

Merit: 102

Hi, maybe this question is asked before, but how should the fast switching ('p') work? As soon as I hit 'p' the miner tries to switch to the other pool, but I got errors 9 out of 10 times:
[2018-05-01 10:00:14] Switching to next pool from pools config
[2018-05-01 10:00:19] Connecting to sumo.pandapool.nl:5555
[2018-05-01 10:00:19] Connecting to sumo.pandapool.nl:5555
[2018-05-01 10:00:19] Connected!
[2018-05-01 10:00:20] Could not login user to pool
[2018-05-01 10:00:20] ERROR : A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
[2018-05-01 10:00:20] Can't connect to sumo.pandapool.nl:5555
[2018-05-01 10:00:20] Switching to next pool from pools config

Sometimes it works once, but as soon I try to switch later on I got these errors again and have to restart the miner.

Mind163

newbie

Activity: 79

Merit: 0

Hey. And is there an opportunity for an example to write in the first message the average speed, at least one card in all versions of algorithms?
For example, I can share the speed and frequency of several cards of two algorithms:

RX550 2gb heavy 320-370 ipbc 900-1000 V7 480-515
PX460 2gb heavy 360-390 ipbc 900-1000 V7 475-505
PX460 4gb heavy 550-615 ipbc 1000-1150
PX570 4GB heavy 700-800 ipbc 1800-1950 V7 890-910
PX580 4GB heavy 700-800 ippc 1850-2050 V7 950-985
PX580 8GB (Sams) heavy 1000-1100 ipbc 1900-2100
Vega 56 8 GB Heavy 1380-1550 Ipbc 3650

eduardooaz

newbie

Activity: 24

Merit: 0

Doctor my RX580 8GB hynix is always stable around 1050 when i manage to run srb since bigin with that values but my RX580 8GB micron is always jumping around 800-1000h/S, do you know any tips to improve this or a reason this should be happening? I increased voltage and still same results

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Sevarchik on May 01, 2018, 12:27:06 AM

Hello guys, i can set fan to constant speed with this miner or i need to use 3rd party software?

You can try :

"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2, "target_temperature" : 60, "target_fan_speed" : 2000}
]

The "target_fan_speed" is in RPM.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

doktor83 - any plans to add remote monitoring for your miner?

Sevarchik

member

Activity: 420

Merit: 10

Hello guys, i can set fan to constant speed with this miner or i need to use 3rd party software?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: jmigdlc99 on April 30, 2018, 09:47:21 PM

EDIT: Found a problem with the auto restart on startup function: it disables/enables ALL GPUs in the system. I was hoping it would only restart the GPUs i specified in the config. It ended up restarting my other GPUs which were mining ETH.

Yes, this is the way it's working now, it restarts every AMD gpu it finds. I have in plan to move this restarting option to the gpu_conf, but it needs a lot of rework so it will take some time.
Anyways, i know Vega's need this kind of driver restart, but are there any other cards that benefit from this ?

i will add an option to run a script after the restart is done, so you can run overdriventool or something to set your clocks.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: nighthawk18 on April 30, 2018, 08:07:45 PM

Awesome, Cryptonight-Alloy support was added! I posted a link to your miner on our discord to spread the word.

Thanks

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: UnclWish on April 30, 2018, 08:25:38 PM

Thanks for update, doc.

Important information: I didn't recommend to update AMD driver to version 18.4.1.
After update one of cards on rigs start to drop hashspeed to 0 after several seconds untill restart mining. Problem not only on my rig! Several peoples in neighbor themes wrotes about the same problem with 18.4.1 driver!

Thanks for the info. I really only do testing on the blockchain drivers on Win7/Win10, on the few rigs i have, so this kind of info is welcome!

jmigdlc99

sr. member

Activity: 784

Merit: 282

Switched over from CastXMR to SRBminer today and i love how it's more stable and it has a lower dev fee. Great job overall on the simplified console output as well.

However, my mining hashrates for my Vega56s are hovering around 1750-1800 compared to 1800-1850 when i was using CastXMR. I already have intensity set to 100 and dual thread turned on. Any tips on how to increase hashrate further?

EDIT: Found a problem with the auto restart on startup function: it disables/enables ALL GPUs in the system. I was hoping it would only restart the GPUs i specified in the config. It ended up restarting my other GPUs which were mining ETH.

UnclWish

sr. member

Activity: 1484

Merit: 253

Thanks for update, doc.

Important information: I didn't recommend to update AMD driver to version 18.4.1.
After update one of cards on rigs start to drop hashspeed to 0 after several seconds untill restart mining. Problem not only on my rig! Several peoples in neighbor themes wrotes about the same problem with 18.4.1 driver!

nighthawk18

newbie

Activity: 84

Merit: 0

Awesome, Cryptonight-Alloy support was added! I posted a link to your miner on our discord to spread the word.

Atomicc

member

Activity: 301

Merit: 31

Quote from: doktor83 on April 30, 2018, 02:27:11 PM

Quote from: livada on April 30, 2018, 01:15:17 PM

Ne zamaraj se . to rade samo zato sto imas dobar majner. oni u svojim opcijama nemaju namjestavanje temperature sto je veliki plus tvojem mineru(ocito zele vidjet kako si to izveo da ubace u svoje minere). jos ako ubacis da mogu svakoj kartici dodat frekvenciju memorije ili gpu-a pa jos i voltazu onda bi bio savrsen jer nebi vise nikad morao posezat u wattmine:)

Pa ne znam sto mi to rade al iskreno bas sam se iznervirao. Mada je to bilo za ocekivati, konkurencija je to, uzeo sam im deo kolaca.

Tvoj miner trenutno ima definitivno najbolje rezultate, i konstantno ga razvijaš, i unapredjuješ. Nastavi odličan posao, i ne zamaraj se konkurencijom. Znaš onu staru: "Za dobrim konjem se prašina diže..."
Waiting for a new options....

ZaGunShow

newbie

Activity: 18

Merit: 0

sweet.. This is currently the only problem in the autorestart chain

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ZaGunShow on April 30, 2018, 02:58:43 PM

Its not new to 1.5... but can you explain the kernel setting? I'm getting the periodic hang compiling kernel on GPU 1 (of an 8 card system).

"Some additional parameters you can use in gpu_conf:
"kernel" : 0-4 , IF 0, MINER WILL SELECT MOST SUITABLE KERNEL, OTHERS ARE : 1-FOR GCN CARDS, 2-FOR PRE-GCN CARDS, 3-FOR PRE-GCN EXPERIMENTAL 1, 4-FOR PRE-GCN EXPERIMENTAL 2"

I'm running Vega 64's. I don't know what GCN is referring to. Do I use setting 1?

Thanks

yes for vegas use kernel 1, that is automatically selected if you omit the kernel parameter.

belimedved

newbie

Activity: 2

Merit: 0

Druze da li moze Awesome Miner da prati monitoring tvog minera?

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 289. (Read 237280 times)